<?xml version="1.0" ?>
<!--
 * Copyright 1999-2005 The Apache Software Foundation.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
-->

<!DOCTYPE faqs SYSTEM "sbk:/style/dtd/faqs.dtd">

<faqs title="Distributing &XercesCName;">

  <faq title="What platforms / compilers are being used to build the binary distribution kits?">

    <q>What platforms / compilers are being used to build the binary distribution kits?</q>

    <a>

      <p>&XercesCProjectName; binaries has been built on the following platforms with
        these compilers</p>

	   &build-winunix-supported-platforms;
	   
    </a>
  </faq>

    <faq title="What are the differences between Xerces-C and XML4C?">
        <q>What are the differences between Xerces-C and XML4C?</q>
        <a>

            <p>Xerces-C has intrinsic support for ASCII, UTF-8, UTF-16
            (Big/Small Endian), UCS4 (Big/Small Endian), EBCDIC code pages IBM037, IBM1047 and
            IBM1140 encodings, ISO-8859-1 (aka Latin1) and Windows-1252. This means that it can parse
            input XML files in these above mentioned encodings.</p>

            <p>However, if you wish to parse XML files in any other
            encodings, say in Shift-JIS, Big5 etc., then you cannot
            use Xerces-C. XML4C addresses this need. It combines Xerces-C
            and <jump
            href="http://oss.software.ibm.com/icu/">
            International Components for Unicode (ICU)</jump> and
            provides support for over 100 different encodings.
            XML4C also uses ICU Resource Bundle to load the messages.
            </p>

            <p>ICU is also an open source project but is licensed
            under the <jump
            href="http://www.x.org/terms.htm">
            X License</jump>.  
            Information about XML4C is available at <jump
            href="http://www.alphaworks.ibm.com/tech/xml4c">Alphaworks</jump>
            site.</p>  

        </a>
    </faq>

    <faq title="Which DLL's do I need to distribute with my application?">
        <q>Which DLL's do I need to distribute with my application?</q>
        <a>
 
            <p>You only need to distribute <em>one</em> file:<br></br>

            &XercesCWindowsDLL;.dll for Windows NT/2000, or<br/>
            &XercesCUnixLib;&XercesCUnixSoName;.so for AIX, or<br/>
            &XercesCUnixLib;.so.&XercesCUnixSoName; for Solaris/Linux, or<br/>
            &XercesCUnixLib;.sl.&XercesCUnixSoName; for HP-UX.</p>

            <p>However, if you are using the ICU transcoder then in
            <em>addition</em> to the library file
            mentioned above, you also need to ship:</p>

            <ol>
                <li><em>ICU shared library file</em>:<br></br>
                    icuuc*.dll for Windows NT/2000, or<br></br>
                    libicuuc*.a for AIX, or<br></br>
                    libicuuc*.so for Solaris/Linux, or<br></br>
                    libicuuc*.sl for HP-UX.</li>

                <li><em>ICU converter data shared library file:</em><br></br>
                    icudt*.dll for Windows NT/2000, or<br></br>
                    libicudt*.a for AIX, or<br></br>
                    libicudt*.so for Solaris/Linux, or<br></br>
                    libicudt*.sl for HP-UX.</li>

                <li><em>The &XercesCName; Message file:</em><br></br>
                    XercesMessages*.dll for Windows NT/2000, or<br></br>
                    libXercesMessages*.a for AIX, or<br></br>
                    libXercesMessages*.so for Solaris/Linux, or<br></br>
                    libXercesMessages*.sl for HP-UX.</li>

            </ol>
        </a>
    </faq>

    <faq title="How do I package the sources to create a binary drop?">

        <q>How do I package the sources to create a binary drop?</q>

        <a>
            <p>You have to first compile the sources inside your IDE to
            create the required DLLs and EXEs. Then you need to copy
            over the binaries to another directory for the binary
            drop. A perl script has been provided to give you a jump
            start. You need to install perl on your machine for the script to work.
            If you have changed your source tree, you have to modify the script to suit
            your current directory structure. To invoke the
            script, go to the \&lt;&XercesCProjectName;&gt;\scripts directory, and type:</p>
<source>perl packageBinaries.pl</source>

            <p>You will get a message that somewhat looks like this (changes always happen,
            we are evolving you see!): </p>

<source>Usage is: packageBinaries &lt;options&gt;
options are:  -s &lt;source_directory&gt;
              -o &lt;target_directory&gt;
              -c &lt;C compiler name&gt; (e.g. gcc or xlc_r)
              -x &lt;C++ compiler name&gt; (e.g. g++ or xlC_r)
              -m &lt;message loader&gt; can be 'inmem', 'icu' or 'iconv'
              -n &lt;net accessor&gt; can be 'fileonly' or 'libwww'
              -t &lt;transcoder&gt; can be 'icu' or 'native'
              -r &lt;thread option&gt; can be 'pthread' or 'dce' (only used on HP-11)
              -h to get help on these commands
Example: perl packageBinaries.pl -s$HOME/&XercesCSrcInstallDir;
                                 -o$HOME/&XercesCInstallDir;
                                 -cgcc -xg++ -minmem
                                 -nfileonly -tnative</source>

            <p>Make sure that your compiler can be invoked from the command line and
            follow the instructions to produce a binary drop.</p>
        </a>
    </faq>

    <faq title="I do not see binaries for my platform. When will they be available?">

        <q>I do not see binaries for my platform. When will they be available?</q>

        <a>
            <p>The reason why you see binaries only for some specific
            platforms is that we have had the maximum requests for
            them. Moreover, we have limited resources and hence cannot
            publish binaries for every platform. If you wish to
            contribute your time and effort in building binaries for a
            specific platform/environment then please send a mail to the
            <jump href="mailto:&XercesCDevelEmailAddress;">&XercesCName; development mailing list</jump>.
            We can definitely use any extra help in this open source
            project</p>
        </a>
    </faq>


    <faq title="When will a port to my platform be available?">

        <q>When will a port to my platform be available?</q>

        <a>
          <p>We would like to see &XercesCProjectName; ported to as
          many platforms as there are. Again, due to limited resources
          we cannot do all the ports. We will help you make this port
          happen. Here are some <jump
          href="program-others.html#PortingGuidelines">Porting
          Guidelines</jump>.</p>

            <p>We strongly encourage you to submit the changes that
            are required to make it work on another platform. We will
            incorporate these changes in the source code base and make
            them available in the future releases.</p>

            <p>All porting changes may be sent to the
            <jump href="mailto:&XercesCDevelEmailAddress;">&XercesCName; development mailing list</jump>
            .</p>
        </a>
    </faq>


    <faq title="How can I port &XercesCProjectName; to my favourite platform?">
        <q>How can I port &XercesCProjectName; to my favourite platform?</q>
        <a>
          <p>Here are some <jump
          href="program-others.html#PortingGuidelines">Porting
          Guidelines</jump>.</p>
        </a>
    </faq>



    <faq title="What application do you use to create the documentation?">
        <q>What application do you use to create the documentation?</q>
        <a>
            <p>We have used an internal XML based application to create the
            documentation. The documentation files are all written in XML and the
            application, internally codenamed StyleBook, makes use of XSL to transform
            it into an HTML document that you are seeing right now.
            It is currently available on the
            <jump href="http://xml.apache.org/">Apache</jump> open source website as
            <jump href="http://xml.apache.org/cocoon/index.html">Cocoon</jump>.</p>

	    <p>The API documentation is generated using
            <jump href="http://www.stack.nl/~dimitri/doxygen/">Doxygen</jump> and
	    <jump href="http://www.research.att.com/sw/tools/graphviz/">GraphViz</jump>.</p>

            <p>See <jump href="faq-build.html#faq-18">
            FAQ: Regenerating (API) documentation?</jump></p>

        </a>
    </faq>


    <faq title="Can I use &XercesCProjectName; in my product?">
        <q>Can I use &XercesCProjectName; in my product?</q>
        <a>
            <p>Yes! Read the license agreement first and if you still
            have further questions, then please address them to the
            <jump href="mailto:&XercesCUserEmailAddress;">&XercesCName; user mailing list</jump>
            .</p>

        </a>
</faq>


   <faq title="How do I uninstall &XercesCName;?">
       <q>How do I uninstall &XercesCName;?</q>
       <a>
          <p>&XercesCName; only installs itself in a single directory and does not
          set any registry entries. Thus, to uninstall, you only need to remove the
          directory where you installed it, and all &XercesCName; related files will be
          removed.</p>
       </a>
   </faq>
   <faq title="I am getting a tar checksum error on Solaris. What's the problem?">
      <q>I am getting a tar checksum error on Solaris. What's the problem?</q>
      <a>
         <p>The problem is caused by a limitation in the original tar spec, which
            prevented it from archiving files with long pathnames.  Unfortunately,
            various current versions of tar use different extensions for eliminating
            this restriction which are incompatible with each other (or they do not
            remove the restriction at all).  Rather than altering the pathnames for
            the &XercesCName; package, which would make them compatible with the original
            tar spec but make it more difficult to know what was where, it was
            decided to use GNU tar (gtar), which handles arbitrarily long pathnames
            and is freely available on every platform on which &XercesCName; is
            supported.  If you don't already have GNU tar installed on your system,
            you can obtain it from the Free Software Foundation
            <jump href="http://www.gnu.org/software/tar/tar.html">
            http://www.gnu.org/software/tar/tar.html</jump>.  For additional
            background information on this problem, see the online manual
            <jump href="http://www.gnu.org/manual/tar/html_node/tar_117.html#SEC112">
            GNU tar and POSIX tar </jump> for the utility.
         </p>
      </a>
   </faq>
</faqs>