--- doxygen-1.2.12/doc/float.sty.orig Mon Dec 3 17:49:54 2001 +++ doxygen-1.2.12/doc/float.sty Mon Dec 3 17:48:42 2001 @@ -0,0 +1,167 @@ +%% +%% This is file `float.sty', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% float.dtx (with options: `package') +%% +%% IMPORTANT NOTICE: +%% This file is a stripped version of `float.dtx', +%% copyright (c) 1991-2000 Anselm Lingnau +%% (lingnau@tm.informatik.uni-frankfurt.de) +%% +%% This file may only be distributed together with the corresponding +%% `float.dtx' file. See `float.dtx' for distribution conditions on +%% the original source. +%% +%% Package `float' to use with LaTeX 2e +%% Copyright (C) 1991-2000 Anselm Lingnau, all rights reserved +%% +\NeedsTeXFormat{LaTeX2e}[1999/12/01] +\ProvidesPackage{float} + [2001/11/08 v1.3d Float enhancements (AL)] +\newcounter{float@type} +\@ifundefined{c@figure}% + {\setcounter{float@type}{1}}% + {\setcounter{float@type}{4}} +\newcommand\floatstyle[1]{\@ifundefined{fs@#1}% + {\float@error{#1}}% + {\def\float@style{#1}}} +\newcommand\float@error[1]{\PackageError{float}{% + Unknown float style `#1' +}{\@eha}} +\newcommand\floatname[2]{\@namedef{fname@#1}{#2}} +\newcommand\floatplacement[2]{\@namedef{fps@#1}{#2}} +\newcommand\floatevery[2]{\csname @float@every@#1\endcsname={#2}} +\newcommand\restylefloat{\@ifstar\float@restyle@\float@restyle} +\newcommand\float@restyle@[1]{\float@restyle{#1}% + \expandafter\let\csname @float@c@#1\endcsname=\@caption} +\newcommand\float@restyle[1]{\expandafter\edef\csname + fst@#1\endcsname{\expandafter\noexpand\csname + fs@\float@style\endcsname}% + \@namedef{#1}{\@nameuse{fst@#1}% + \@float@setevery{#1}\@float{#1}}% + \@namedef{#1*}{\@nameuse{fst@#1}% + \@float@setevery{#1}\@dblfloat{#1}}% + \expandafter\let\csname end#1\endcsname\float@end + \expandafter\let\csname end#1*\endcsname\float@dblend + \expandafter\let\csname @float@c@#1\endcsname=\float@caption + \@ifundefined{@float@every@#1}{% + \expandafter\newtoks\csname @float@every@#1\endcsname}{}% + \@nameuse{@float@every@#1}={}} +\newtoks\float@exts +\newcommand\newfloat[3]{\@namedef{ext@#1}{#3} + \let\float@do=\relax + \xdef\@tempa{\noexpand\float@exts{\the\float@exts \float@do{#3}}}% + \@tempa + \floatplacement{#1}{#2}% + \@ifundefined{fname@#1}{\floatname{#1}{#1}}{} + \expandafter\edef\csname ftype@#1\endcsname{\value{float@type}}% + \addtocounter{float@type}{\value{float@type}} + \restylefloat{#1}% + \expandafter\edef\csname fnum@#1\endcsname% + {\expandafter\noexpand\csname fname@#1\endcsname{} + \expandafter\noexpand\csname the#1\endcsname} + \@ifnextchar[{\float@newx{#1}}% + {\@ifundefined{c@#1}{\newcounter{#1}\@namedef{the#1}{\arabic{#1}}}% + {}}} +\def\float@newx#1[#2]{\@ifundefined{c@#1}{\newcounter{#1}[#2]% + \expandafter\edef\csname the#1\endcsname{% + \expandafter\noexpand\csname + the#2\endcsname.\noexpand\arabic{#1}}}% + {\PackageWarning{float}{Can't redefine counter variable for #1.}}} +\let\@float@Hx\@xfloat +\def\@xfloat#1[{\@ifnextchar{H}{\@float@HH{#1}[}{\@float@Hx{#1}[}} +\newsavebox\float@box +\newif\if@flstyle +\def\@float@HH#1[H]{% + \expandafter\let\csname end#1\endcsname\float@endH + \let\@currbox\float@box + \def\@captype{#1}\setbox\@floatcapt=\vbox{}% + \expandafter\ifx\csname fst@#1\endcsname\relax + \@flstylefalse\else\@flstyletrue\fi + \setbox\@currbox\color@vbox\normalcolor + \vbox\bgroup \hsize\columnwidth \@parboxrestore + \@floatboxreset \@setnobreak + \ignorespaces} +\newtoks\@float@everytoks +\let\@float@boxreset=\@floatboxreset +\def\@floatboxreset{\@float@boxreset\the\@float@everytoks} +\def\@float@setevery#1{\@float@everytoks=\@nameuse{@float@every@#1}} +\newcommand\float@makebox[1]{% + \vbox{\hsize=#1 \@parboxrestore + \@fs@pre\@fs@iftopcapt + \ifvoid\@floatcapt\else\unvbox\@floatcapt\par\@fs@mid\fi + \unvbox\@currbox + \else\unvbox\@currbox + \ifvoid\@floatcapt\else\par\@fs@mid\unvbox\@floatcapt\fi + \fi\par\@fs@post\vskip\z@}} +\newcommand\float@end{\@endfloatbox + \global\setbox\@currbox\float@makebox\columnwidth + \let\@endfloatbox\relax\end@float} +\newcommand\float@endH{\@endfloatbox\vskip\intextsep + \if@flstyle\setbox\@currbox\float@makebox\columnwidth\fi + \box\@currbox\vskip\intextsep\relax} +\newcommand\float@dblend{\@endfloatbox + \global\setbox\@currbox\float@makebox\textwidth + \let\@endfloatbox\relax\end@dblfloat} +\newsavebox\@floatcapt +\renewcommand\caption{% + \ifx\@captype\@undefined + \@latex@error{\noexpand\caption outside float}\@ehd + \expandafter\@gobble + \else + \refstepcounter\@captype + \let\@tempf\@caption + \expandafter\ifx\csname @float@c@\@captype\endcsname\relax\else + \expandafter\expandafter\let + \expandafter\@tempf\csname @float@c@\@captype\endcsname\fi\fi + \@dblarg{\@tempf\@captype}} +\long\def\float@caption#1[#2]#3{\addcontentsline{\@nameuse{ext@#1}}{#1}% + {\protect\numberline{\@nameuse{the#1}}{\ignorespaces #2}} + \global\setbox\@floatcapt\vbox\bgroup\@parboxrestore + \normalsize\@fs@capt{\@nameuse{fnum@#1}}{\ignorespaces #3}% + \@ifnextchar[{\float@ccon}{\egroup}} +\long\def\float@ccon[#1]{#1\par\egroup} +\newcommand*{\listof}[2]{% + \@ifundefined{ext@#1}{\float@error{#1}}{% + \@namedef{l@#1}{\@dottedtocline{1}{1.5em}{2.3em}}% + \float@listhead{#2}% + \begingroup\setlength{\parskip}{\z@}% + \@starttoc{\@nameuse{ext@#1}}% + \endgroup}} +\providecommand*{\float@listhead}[1]{% + \@ifundefined{chapter}{\def\@tempa{\section*}}% + {\def\@tempa{\chapter*}}% + \@tempa{#1\@mkboth{\MakeUppercase{#1}}{\MakeUppercase{#1}}}}% +\newcommand\float@addtolists[1]{% + \def\float@do##1{\addtocontents{##1}{#1}} \the\float@exts} +\newcommand\floatc@plain[2]{\setbox\@tempboxa\hbox{{\@fs@cfont #1:} #2}% + \ifdim\wd\@tempboxa>\hsize {\@fs@cfont #1:} #2\par + \else\hbox to\hsize{\hfil\box\@tempboxa\hfil}\fi} +\newcommand\fs@plain{\def\@fs@cfont{\rmfamily}\let\@fs@capt\floatc@plain + \def\@fs@pre{}\def\@fs@post{}% + \def\@fs@mid{\vspace\abovecaptionskip\relax}% + \let\@fs@iftopcapt\iffalse} +\newcommand\fs@plaintop{\fs@plain + \def\@fs@mid{\vspace\belowcaptionskip\relax}% + \let\@fs@iftopcapt\iftrue} +\let\floatc@plaintop=\floatc@plain +\newcommand\floatc@ruled[2]{{\@fs@cfont #1} #2\par} +\newcommand\fs@ruled{\def\@fs@cfont{\bfseries}\let\@fs@capt\floatc@ruled + \def\@fs@pre{\hrule height.8pt depth0pt \kern2pt}% + \def\@fs@post{\kern2pt\hrule\relax}% + \def\@fs@mid{\kern2pt\hrule\kern2pt}% + \let\@fs@iftopcapt\iftrue} +\newcommand\fs@boxed{\def\@fs@cfont{\bfseries}\let\@fs@capt\floatc@plain + \def\@fs@pre{\setbox\@currbox\vbox{\hbadness10000 + \moveleft3.4pt\vbox{\advance\hsize by6.8pt + \hrule \hbox to\hsize{\vrule\kern3pt + \vbox{\kern3pt\box\@currbox\kern3pt}\kern3pt\vrule}\hrule}}}% + \def\@fs@mid{\kern2pt}% + \def\@fs@post{}\let\@fs@iftopcapt\iffalse} +\floatstyle{plain} +\endinput +%% +%% End of file `float.sty'. --- doxygen-1.2.18/doc/fancyhdr.sty.orig 2003-02-19 11:12:13.000000000 +0100 +++ doxygen-1.2.18/doc/fancyhdr.sty 2003-02-19 11:09:16.000000000 +0100 @@ -0,0 +1,329 @@ +% fancyhdr.sty version 1.99d +% Fancy headers and footers for LaTeX. +% Piet van Oostrum, Dept of Computer Science, University of Utrecht +% Padualaan 14, P.O. Box 80.089, 3508 TB Utrecht, The Netherlands +% Telephone: +31 30 2532180. Email: piet@cs.ruu.nl +% ======================================================================== +% LICENCE: This is free software. You are allowed to use and distribute +% this software in any way you like. You are also allowed to make modified +% versions of it, but you can distribute a modified version only if you +% clearly indicate that it is a modified version and the person(s) who +% modified it. This indication should be in a prominent place, e.g. in the +% top of the file. If possible a contact address, preferably by email, +% should be given for these persons. If that is feasible the modifications +% should be indicated in the source code. +% ======================================================================== +% MODIFICATION HISTORY: +% Sep 16, 1994 +% version 1.4: Correction for use with \reversemargin +% Sep 29, 1994: +% version 1.5: Added the \iftopfloat, \ifbotfloat and \iffloatpage commands +% Oct 4, 1994: +% version 1.6: Reset single spacing in headers/footers for use with +% setspace.sty or doublespace.sty +% Oct 4, 1994: +% version 1.7: changed \let\@mkboth\markboth to +% \def\@mkboth{\protect\markboth} to make it more robust +% Dec 5, 1994: +% version 1.8: corrections for amsbook/amsart: define \@chapapp and (more +% importantly) use the \chapter/sectionmark definitions from ps@headings if +% they exist (which should be true for all standard classes). +% May 31, 1995: +% version 1.9: The proposed \renewcommand{\headrulewidth}{\iffloatpage... +% construction in the doc did not work properly with the fancyplain style. +% June 1, 1995: +% version 1.91: The definition of \@mkboth wasn't restored on subsequent +% \pagestyle{fancy}'s. +% June 1, 1995: +% version 1.92: The sequence \pagestyle{fancyplain} \pagestyle{plain} +% \pagestyle{fancy} would erroneously select the plain version. +% June 1, 1995: +% version 1.93: \fancypagestyle command added. +% Dec 11, 1995: +% version 1.94: suggested by Conrad Hughes <chughes@maths.tcd.ie> +% CJCH, Dec 11, 1995: added \footruleskip to allow control over footrule +% position (old hardcoded value of .3\normalbaselineskip is far too high +% when used with very small footer fonts). +% Jan 31, 1996: +% version 1.95: call \@normalsize in the reset code if that is defined, +% otherwise \normalsize. +% this is to solve a problem with ucthesis.cls, as this doesn't +% define \@currsize. Unfortunately for latex209 calling \normalsize doesn't +% work as this is optimized to do very little, so there \@normalsize should +% be called. Hopefully this code works for all versions of LaTeX known to +% mankind. +% April 25, 1996: +% version 1.96: initialize \headwidth to a magic (negative) value to catch +% most common cases that people change it before calling \pagestyle{fancy}. +% Note it can't be initialized when reading in this file, because +% \textwidth could be changed afterwards. This is quite probable. +% We also switch to \MakeUppercase rather than \uppercase and introduce a +% \nouppercase command for use in headers. and footers. +% May 3, 1996: +% version 1.97: Two changes: +% 1. Undo the change in version 1.8 (using the pagestyle{headings} defaults +% for the chapter and section marks. The current version of amsbook and +% amsart classes don't seem to need them anymore. Moreover the standard +% latex classes don't use \markboth if twoside isn't selected, and this is +% confusing as \leftmark doesn't work as expected. +% 2. include a call to \ps@empty in ps@@fancy. This is to solve a problem +% in the amsbook and amsart classes, that make global changes to \topskip, +% which are reset in \ps@empty. Hopefully this doesn't break other things. +% May 7, 1996: +% version 1.98: +% Added % after the line \def\nouppercase +% May 7, 1996: +% version 1.99: This is the alpha version of fancyhdr 2.0 +% Introduced the new commands \fancyhead, \fancyfoot, and \fancyhf. +% Changed \headrulewidth, \footrulewidth, \footruleskip to +% macros rather than length parameters, In this way they can be +% conditionalized and they don't consume length registers. There is no need +% to have them as length registers unless you want to do calculations with +% them, which is unlikely. Note that this may make some uses of them +% incompatible (i.e. if you have a file that uses \setlength or \xxxx=) +% May 10, 1996: +% version 1.99a: +% Added a few more % signs +% May 10, 1996: +% version 1.99b: +% Changed the syntax of \f@nfor to be resistent to catcode changes of := +% Removed the [1] from the defs of \lhead etc. because the parameter is +% consumed by the \@[xy]lhead etc. macros. +% June 24, 1997: +% version 1.99c: +% corrected \nouppercase to also include the protected form of \MakeUppercase +% \global added to manipulation of \headwidth. +% \iffootnote command added. +% Some comments added about \@fancyhead and \@fancyfoot. +% Aug 24, 1998 +% version 1.99d +% Changed the default \ps@empty to \ps@@empty in order to allow +% \fancypagestyle{empty} redefinition. + +\let\fancy@def\gdef + +\def\if@mpty#1#2#3{\def\temp@ty{#1}\ifx\@empty\temp@ty #2\else#3\fi} + +% Usage: \@forc \var{charstring}{command to be executed for each char} +% This is similar to LaTeX's \@tfor, but expands the charstring. + +\def\@forc#1#2#3{\expandafter\f@rc\expandafter#1\expandafter{#2}{#3}} +\def\f@rc#1#2#3{\def\temp@ty{#2}\ifx\@empty\temp@ty\else + \f@@rc#1#2\f@@rc{#3}\fi} +\def\f@@rc#1#2#3\f@@rc#4{\def#1{#2}#4\f@rc#1{#3}{#4}} + +% Usage: \f@nfor\name:=list\do{body} +% Like LaTeX's \@for but an empty list is treated as a list with an empty +% element + +\newcommand{\f@nfor}[3]{\edef\@fortmp{#2}% + \expandafter\@forloop#2,\@nil,\@nil\@@#1{#3}} + +% Usage: \def@ult \cs{defaults}{argument} +% sets \cs to the characters from defaults appearing in argument +% or defaults if it would be empty. All characters are lowercased. + +\newcommand\def@ult[3]{% + \edef\temp@a{\lowercase{\edef\noexpand\temp@a{#3}}}\temp@a + \def#1{}% + \@forc\tmpf@ra{#2}% + {\expandafter\if@in\tmpf@ra\temp@a{\edef#1{#1\tmpf@ra}}{}}% + \ifx\@empty#1\def#1{#2}\fi} +% +% \if@in <char><set><truecase><falsecase> +% +\newcommand{\if@in}[4]{% + \edef\temp@a{#2}\def\temp@b##1#1##2\temp@b{\def\temp@b{##1}}% + \expandafter\temp@b#2#1\temp@b\ifx\temp@a\temp@b #4\else #3\fi} + +\newcommand{\fancyhead}{\@ifnextchar[{\f@ncyhf h}{\f@ncyhf h[]}} +\newcommand{\fancyfoot}{\@ifnextchar[{\f@ncyhf f}{\f@ncyhf f[]}} +\newcommand{\fancyhf}{\@ifnextchar[{\f@ncyhf {}}{\f@ncyhf {}[]}} + +% The header and footer fields are stored in command sequences with +% names of the form: \f@ncy<x><y><z> with <x> for [eo], <y> form [lcr] +% and <z> from [hf]. + +\def\f@ncyhf#1[#2]#3{% + \def\temp@c{}% + \@forc\tmpf@ra{#2}% + {\expandafter\if@in\tmpf@ra{eolcrhf,EOLCRHF}% + {}{\edef\temp@c{\temp@c\tmpf@ra}}}% + \ifx\@empty\temp@c\else + \ifx\PackageError\undefined + \errmessage{Illegal char `\temp@c' in fancyhdr argument: + [#2]}\else + \PackageError{Fancyhdr}{Illegal char `\temp@c' in fancyhdr argument: + [#2]}{}\fi + \fi + \f@nfor\temp@c{#2}% + {\def@ult\f@@@eo{eo}\temp@c + \def@ult\f@@@lcr{lcr}\temp@c + \def@ult\f@@@hf{hf}{#1\temp@c}% + \@forc\f@@eo\f@@@eo + {\@forc\f@@lcr\f@@@lcr + {\@forc\f@@hf\f@@@hf + {\expandafter\fancy@def\csname + f@ncy\f@@eo\f@@lcr\f@@hf\endcsname + {#3}}}}}} + +% Fancyheadings version 1 commands. These are more or less deprecated, +% but they continue to work. + +\newcommand{\lhead}{\@ifnextchar[{\@xlhead}{\@ylhead}} +\def\@xlhead[#1]#2{\fancy@def\f@ncyelh{#1}\fancy@def\f@ncyolh{#2}} +\def\@ylhead#1{\fancy@def\f@ncyelh{#1}\fancy@def\f@ncyolh{#1}} + +\newcommand{\chead}{\@ifnextchar[{\@xchead}{\@ychead}} +\def\@xchead[#1]#2{\fancy@def\f@ncyech{#1}\fancy@def\f@ncyoch{#2}} +\def\@ychead#1{\fancy@def\f@ncyech{#1}\fancy@def\f@ncyoch{#1}} + +\newcommand{\rhead}{\@ifnextchar[{\@xrhead}{\@yrhead}} +\def\@xrhead[#1]#2{\fancy@def\f@ncyerh{#1}\fancy@def\f@ncyorh{#2}} +\def\@yrhead#1{\fancy@def\f@ncyerh{#1}\fancy@def\f@ncyorh{#1}} + +\newcommand{\lfoot}{\@ifnextchar[{\@xlfoot}{\@ylfoot}} +\def\@xlfoot[#1]#2{\fancy@def\f@ncyelf{#1}\fancy@def\f@ncyolf{#2}} +\def\@ylfoot#1{\fancy@def\f@ncyelf{#1}\fancy@def\f@ncyolf{#1}} + +\newcommand{\cfoot}{\@ifnextchar[{\@xcfoot}{\@ycfoot}} +\def\@xcfoot[#1]#2{\fancy@def\f@ncyecf{#1}\fancy@def\f@ncyocf{#2}} +\def\@ycfoot#1{\fancy@def\f@ncyecf{#1}\fancy@def\f@ncyocf{#1}} + +\newcommand{\rfoot}{\@ifnextchar[{\@xrfoot}{\@yrfoot}} +\def\@xrfoot[#1]#2{\fancy@def\f@ncyerf{#1}\fancy@def\f@ncyorf{#2}} +\def\@yrfoot#1{\fancy@def\f@ncyerf{#1}\fancy@def\f@ncyorf{#1}} + +\newdimen\headwidth +\newcommand{\headrulewidth}{0.4pt} +\newcommand{\footrulewidth}{\z@skip} +\newcommand{\footruleskip}{.3\normalbaselineskip} + +% Fancyplain stuff shouldn't be used anymore (rather +% \fancypagestyle{plain} should be used), but it must be present for +% compatibility reasons. + +\newcommand{\plainheadrulewidth}{\z@skip} +\newcommand{\plainfootrulewidth}{\z@skip} +\newif\if@fancyplain \@fancyplainfalse +\def\fancyplain#1#2{\if@fancyplain#1\else#2\fi} + +\headwidth=-123456789sp %magic constant + +% Command to reset various things in the headers: +% a.o. single spacing (taken from setspace.sty) +% and the catcode of ^^M (so that epsf files in the header work if a +% verbatim crosses a page boundary) +% It also defines a \nouppercase command that disables \uppercase and +% \Makeuppercase. It can only be used in the headers and footers. +\def\fancy@reset{\restorecr + \def\baselinestretch{1}% + \def\nouppercase##1{{\let\uppercase\relax\let\MakeUppercase\relax + \expandafter\let\csname MakeUppercase \endcsname\relax##1}}% + \ifx\undefined\@newbaseline% NFSS not present; 2.09 or 2e + \ifx\@normalsize\undefined \normalsize % for ucthesis.cls + \else \@normalsize \fi + \else% NFSS (2.09) present + \@newbaseline% + \fi} + +% Initialization of the head and foot text. + +% The default values still contain \fancyplain for compatibility. +\fancyhf{} % clear all +% lefthead empty on ``plain'' pages, \rightmark on even, \leftmark on odd pages +% evenhead empty on ``plain'' pages, \leftmark on even, \rightmark on odd pages +\fancyhead[el,or]{\fancyplain{}{\sl\rightmark}} +\fancyhead[er,ol]{\fancyplain{}{\sl\leftmark}} +\fancyfoot[c]{\rm\thepage} % page number + +% Put together a header or footer given the left, center and +% right text, fillers at left and right and a rule. +% The \lap commands put the text into an hbox of zero size, +% so overlapping text does not generate an errormessage. +% These macros have 5 parameters: +% 1. \@lodd or \@rodd % This determines at which side the header will stick +% out. +% 2. \f@ncyolh, \f@ncyelh, \f@ncyolf or \f@ncyelf. This is the left component. +% 3. \f@ncyoch, \f@ncyech, \f@ncyocf or \f@ncyecf. This is the middle comp. +% 4. \f@ncyorh, \f@ncyerh, \f@ncyorf or \f@ncyerf. This is the right component. +% 5. \@lodd or \@rodd % This determines at which side the header will stick +% out. This is the reverse of parameter nr. 1. One of them is always +% \relax and the other one is \hss (after expansion). + +\def\@fancyhead#1#2#3#4#5{#1\hbox to\headwidth{\fancy@reset\vbox{\hbox +{\rlap{\parbox[b]{\headwidth}{\raggedright#2\strut}}\hfill +\parbox[b]{\headwidth}{\centering#3\strut}\hfill +\llap{\parbox[b]{\headwidth}{\raggedleft#4\strut}}}\headrule}}#5} + +\def\@fancyfoot#1#2#3#4#5{#1\hbox to\headwidth{\fancy@reset\vbox{\footrule +\hbox{\rlap{\parbox[t]{\headwidth}{\raggedright#2\strut}}\hfill +\parbox[t]{\headwidth}{\centering#3\strut}\hfill +\llap{\parbox[t]{\headwidth}{\raggedleft#4\strut}}}}}#5} + +\def\headrule{{\if@fancyplain\let\headrulewidth\plainheadrulewidth\fi +\hrule\@height\headrulewidth\@width\headwidth \vskip-\headrulewidth}} + +\def\footrule{{\if@fancyplain\let\footrulewidth\plainfootrulewidth\fi +\vskip-\footruleskip\vskip-\footrulewidth +\hrule\@width\headwidth\@height\footrulewidth\vskip\footruleskip}} + +\def\ps@fancy{% +\@ifundefined{@chapapp}{\let\@chapapp\chaptername}{}%for amsbook +% +% Define \MakeUppercase for old LaTeXen. +% Note: we used \def rather than \let, so that \let\uppercase\relax (from +% the version 1 documentation) will still work. +% +\@ifundefined{MakeUppercase}{\def\MakeUppercase{\uppercase}}{}% +\@ifundefined{chapter}{\def\sectionmark##1{\markboth +{\MakeUppercase{\ifnum \c@secnumdepth>\z@ + \thesection\hskip 1em\relax \fi ##1}}{}}% +\def\subsectionmark##1{\markright {\ifnum \c@secnumdepth >\@ne + \thesubsection\hskip 1em\relax \fi ##1}}}% +{\def\chaptermark##1{\markboth {\MakeUppercase{\ifnum \c@secnumdepth>\m@ne + \@chapapp\ \thechapter. \ \fi ##1}}{}}% +\def\sectionmark##1{\markright{\MakeUppercase{\ifnum \c@secnumdepth >\z@ + \thesection. \ \fi ##1}}}}% +%\csname ps@headings\endcsname % use \ps@headings defaults if they exist +\ps@@fancy +\gdef\ps@fancy{\@fancyplainfalse\ps@@fancy}% +% Initialize \headwidth if the user didn't +% +\ifdim\headwidth<0sp +% +% This catches the case that \headwidth hasn't been initialized and the +% case that the user added something to \headwidth in the expectation that +% it was initialized to \textwidth. We compensate this now. This loses if +% the user intended to multiply it by a factor. But that case is more +% likely done by saying something like \headwidth=1.2\textwidth. +% The doc says you have to change \headwidth after the first call to +% \pagestyle{fancy}. This code is just to catch the most common cases were +% that requirement is violated. +% + \global\advance\headwidth123456789sp\global\advance\headwidth\textwidth +\fi} +\def\ps@fancyplain{\ps@fancy \let\ps@plain\ps@plain@fancy} +\def\ps@plain@fancy{\@fancyplaintrue\ps@@fancy} +\let\ps@@empty\ps@empty +\def\ps@@fancy{% +\ps@@empty % This is for amsbook/amsart, which do strange things with \topskip +\def\@mkboth{\protect\markboth}% +\def\@oddhead{\@fancyhead\@lodd\f@ncyolh\f@ncyoch\f@ncyorh\@rodd}% +\def\@oddfoot{\@fancyfoot\@lodd\f@ncyolf\f@ncyocf\f@ncyorf\@rodd}% +\def\@evenhead{\@fancyhead\@rodd\f@ncyelh\f@ncyech\f@ncyerh\@lodd}% +\def\@evenfoot{\@fancyfoot\@rodd\f@ncyelf\f@ncyecf\f@ncyerf\@lodd}% +} +\def\@lodd{\if@reversemargin\hss\else\relax\fi} +\def\@rodd{\if@reversemargin\relax\else\hss\fi} + +\newif\iffootnote +\let\latex@makecol\@makecol +\def\@makecol{\ifvoid\footins\footnotetrue\else\footnotefalse\fi +\let\topfloat\@toplist\let\botfloat\@botlist\latex@makecol} +\def\iftopfloat#1#2{\ifx\topfloat\empty #2\else #1\fi} +\def\ifbotfloat#1#2{\ifx\botfloat\empty #2\else #1\fi} +\def\iffloatpage#1#2{\if@fcolmade #1\else #2\fi} + +\newcommand{\fancypagestyle}[2]{% + \@namedef{ps@#1}{\let\fancy@def\def#2\relax\ps@fancy}}