http://www.nagiosexchange.org/Wiki_Home.wiki.0.html?&tx_drwiki_pi1[keyword]=HP%20Switches 1 Julian Hein's Configuration Use the check_snmp plugin at these OID's: Hpmemoryfree = .1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.6.1 Cpu = .1.3.6.1.4.1.11.2.14.11.5.1.9.6.1.0 Fan = .1.3.6.1.4.1.11.2.14.11.1.2.6.1.4.1 Power = .1.3.6.1.4.1.11.2.14.11.1.2.6.1.4.2 Temprature = .1.3.6.1.4.1.11.2.14.11.1.2.6.1.4.4 My check_commands are like this: define command{ command_name check_hpmemoryfree command_line $USER1$/check_snmpp -H $HOSTADDRESS$ -C $ARG1$ -o .1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.6.1 -t 5 -w $ARG2$ -c $ARG3$ -u bytes -l free } define command{ command_name hpsw_cpu command_line $USER1$/check_snmpp -H $HOSTADDRESS$ -o .1.3.6.1.4.1.11.2.14.11.5.1.9.6.1.0 -t 5 -w '95:90' -c '100:95' -C $ARG1$ -u % -l "5min cpu" } define command{ command_name check_hpfan command_line $USER1$/check_snmpp -H 192.168.33.10 -C chero -o .1.3.6.1.4.1.11.2.14.11.1.2.6.1.4.1 -w 4 -c 3:5 -l 'Fan status' } define command{ command_name check_hppower command_line $USER1$/check_snmpp -H 192.168.33.10 -C chero -o .1.3.6.1.4.1.11.2.14.11.1.2.6.1.4.2 -w 4 -c 3:5 -l 'Power Supply status' } define command{ command_name check_hptemp command_line $USER1$/check_snmpp -H 192.168.33.10 -C chero -o .1.3.6.1.4.1.11.2.14.11.1.2.6.1.4.4 -w 4 -c 3:5 -l 'Temprature status' }