HiSax Card types:

    Type                Required parameters (in addition to type and protocol)

    1   Teles 16.0               irq, mem, io
    2   Teles  8.0               irq, mem
    3   Teles 16.3 (non PnP)     irq, io
    4   Creatix/Teles PnP        irq, io0 (ISAC), io1 (HSCX)
    5   AVM A1 (Fritz)           irq, io
    6   ELSA PCC/PCF cards       io or nothing for autodetect (the iobase is
                                 required only if you have more than one ELSA
                                 card in your PC)
    7   ELSA Quickstep 1000      irq, io  (from isapnp setup)
    8   Teles 16.3 PCMCIA     	 irq, io
    9   ITK ix1-micro Rev.2      irq, io
   10   ELSA PCMCIA		 irq, io  (set with card manager)
   11   Eicon.Diehl Diva ISA PnP irq, io
   11   Eicon.Diehl Diva PCI     no parameter
   12   ASUS COM ISDNLink        irq, io  (from isapnp setup)
   13   HFC-2BS0 based cards     irq, io
   14   Teles 16.3c PnP          irq, io
   15   Sedlbauer Speed Card     irq, io
   15   Sedlbauer PC/104         irq, io
   15   Sedlbauer Speed PCI	 no parameter
   16   USR Sportster internal   irq, io
   17   MIC card                 irq, io
   18   ELSA Quickstep 1000PCI   no parameter
   19   Compaq ISDN S0 ISA card  irq, io0, io1, io (from isapnp setup io=IO2)
   20   NETjet PCI card          no parameter
   21   Teles PCI                no parameter
   22   Sedlbauer Speed Star (PCMCIA) irq, io (set with card manager)
   24   Dr. Neuhaus Niccy PnP    irq, io0, io1 (from isapnp setup)
   24   Dr. Neuhaus Niccy PCI    no parameter
   25   Teles S0Box              irq, io (of the used lpt port)
   26   AVM A1 PCMCIA (Fritz!)   irq, io (set with card manager)
   27   AVM PnP (Fritz!PnP)      irq, io  (from isapnp setup)
   27   AVM PCI (Fritz!PCI)      no parameter
   28   Sedlbauer Speed Fax+     irq, io (from isapnp setup)


At the moment IRQ sharing is only possible with PCI cards. Please make sure
that your IRQ is free and enabled for ISA use.


Examples for module loading

1. Teles 16.3, Euro ISDN, I/O base 280 hex, IRQ 10
   modprobe hisax type=3 protocol=2 io=0x280 irq=10

2. Teles 16.0, 1TR6 ISDN, I/O base d80 hex, IRQ 5, Memory d0000 hex
   modprobe hisax protocol=1 type=1 io=0xd80 mem=0xd0000 irq=5

3. Fritzcard, Euro ISDN, I/O base 340 hex, IRQ 10 and ELSA PCF, Euro ISDN
   modprobe hisax type=5,6 protocol=2,2 io=0x340 irq=10 id=Fritz%Elsa

4. Any ELSA PCC/PCF card, Euro ISDN
   modprobe hisax type=6 protocol=2

5. Teles 16.3 PnP, Euro ISDN, with isapnp configured
   isapnp config:  (INT 0 (IRQ 10 (MODE +E)))
 		   (IO 0 (BASE 0x0580))
                   (IO 1 (BASE 0x0180))
   modprobe hisax type=4 protocol=2 irq=10 io0=0x580 io1=0x180

6. Teles 16.3, Euro ISDN, I/O base 280 hex, IRQ 12 and
   Teles 16.0, 1TR6, IRQ 5, Memory d0000 hex
   modprobe hisax type=3,1 protocol=2,1 io=0x280 mem=0,0xd0000

   Please note the dummy 0 memory address for the Teles 16.3, used as a
   placeholder as described above, in the last example.

7. Teles PCMCIA, Euro ISDN, I/O base 180 hex, IRQ 15 (default values)
   modprobe hisax type=8 protocol=2 io=0x180 irq=15