#!/bin/sh
#
#
# heartbeat     Start high-availability services
#
# Author:       Alan Robertson	<alanr@unix.sh>
# License:      GNU General Public License (GPL)
#
#		This script works correctly under SuSE, Debian,
#		Conectiva, Red Hat and a few others.  Please let me know if it
#		doesn't work under your distribution, and we'll fix it.
#		We don't hate anyone, and like for everyone to use
#		our software, no matter what OS or distribution you're using.
#
# chkconfig: 2345 75 05
# description: Startup script high-availability services.
# processname: heartbeat
# pidfile: /var/run/heartbeat.pid
# config: /etc/ha.d/ha.cf
#
### BEGIN INIT INFO
# Description: heartbeat is a basic high-availability subsystem.
#	It will start services at initialization, and when machines go up
#	or down.  This version will also perform IP address takeover using
#	gratuitous ARPs.  It works correctly for a 2-node configuration,
#	and is extensible to larger configurations.
#	
#	It implements the following kinds of heartbeats:
#		- Bidirectional Serial Rings ("raw" serial ports)
#		- UDP/IP broadcast (ethernet, etc)
#		- UDP/IP multicast (ethernet, etc)
#		- Unicast heartbeats
#		- "ping" heartbeats (for routers, switches, etc.)
#	   	(to be used for breaking ties in 2-node systems
#		 and monitoring networking availability)
#
# Short-Description: High-availability services.
# Provides: heartbeat HA
# Required-Start: $remote_fs $network $time $syslog
# Should-Start: openhpid
# Required-Stop: $remote_fs $network $time $syslog
# Should-stop: openhpid
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
### END INIT INFO


HA_DIR=/etc/ha.d; export HA_DIR
CONFIG=$HA_DIR/ha.cf
. $HA_DIR/shellfuncs

LOCKDIR=/var/lock/subsys
RUNDIR=/var/run


#	Echo without putting a newline on the end
EchoNoNl() {
    Echo  "$@"
}

#	Echo with escapes enabled...
EchoEsc() {
    Echo  "$@"
}

echo_failure() {
    EchoEsc " Heartbeat failure [rc=$1]. $rc_failed"
    return $1
}

echo_success() {
    : Cool!  It started!
    EchoEsc "$rc_done"
}

if
  [ -r /etc/SuSE-release ]
then
  # rc.status is new since SuSE 7.0
  [ -r /etc/rc.status ] && . /etc/rc.status
  [ -r /etc/rc.config ] && . /etc/rc.config

  # Determine the base and follow a runlevel link name.
  base=${0##*/}
  link=${base#*[SK][0-9][0-9]}

fi
if
  [ -z "$rc_done" ]
then
  rc_done="Done."
  rc_failed="Failed."
  rc_skipped="Skipped."
fi


# exec 2>>/var/log/ha-debug

#	This should probably be it's own autoconf parameter
#	because RH has moved it from time to time...
#	and I suspect Conectiva and Mandrake also supply it.

DISTFUNCS=/etc/rc.d/init.d/functions
SUBSYS=heartbeat
MODPROBE=/sbin/modprobe
US=`uname -n`

# Set this to a 1 if you want to automatically load kernel modules
USE_MODULES=1

[ -x $HA_BIN/heartbeat ] || exit 0

#
#	Some environments like it if we use their functions...
#
if
  [ ! -x $DISTFUNCS ]
then
  # Provide our own versions of these functions
  status() {
	$HA_BIN/heartbeat -s
  }
  echo_failure() {
      EchoEsc " Heartbeat failure [rc=$1]. $rc_failed"
      return $1
  }
  echo_success() {
	: Cool!  It started!
      EchoEsc "$rc_done"
  }
else
  . $DISTFUNCS
fi

#
#	See if they've configured things yet...
#
if
  [ ! -f $CONFIG ]
then
  EchoNoNl "Heartbeat not configured: $CONFIG not found."
  echo_failure 1
  exit 0
fi

CrmEnabled() {
  case `ha_parameter crm | tr '[A-Z]' '[a-z]'` in
    y|yes|enable|on|true|1|manual)	true;;
    *)				false;;
  esac
}
StartLogd() {

    $HA_BIN/ha_logd -s >/dev/null 2>&1

    if 
	[ $? -eq 0 ]
    then
	Echo "logd is already running" 
	return 0
    fi
    

    $HA_BIN/ha_logd -d >/dev/null 2>&1
    if 
	[ $? -ne 0 ]
    then
	Echo "starting logd failed"
    fi
    
}

StopLogd() {
    $HA_BIN/ha_logd -s >/dev/null 2>&1
    
    if 
	[ $? -ne 0 ] 
    then
	   Echo "logd is already stopped" 
	   return 0
    fi

    $HA_BIN/ha_logd -k >/dev/null 2>&1
    if 
	[ $? -ne 0 ]	
    then
	Echo "stopping logd failed"
    fi    
}

init_watchdog() {
  if
    [  -f /proc/devices -a  -x $MODPROBE ]
  then
    init_watchdog_linux
  fi
}

#
#	Install the softdog module if we need to
#
init_watchdog_linux() {
#
# 	We need to install it if watchdog is specified in $CONFIG, and
#	/dev/watchdog refers to a softdog device, or it /dev/watchdog
#	doesn't exist at all.
#
#	If we need /dev/watchdog, then we'll make it if necessary.
#
#	Whatever the user says we should use for watchdog device, that's
#	what we'll check for, use and create if necessary.  If they misspell
#	it, or don't put it under /dev, so will we.
#	Hope they do it right :-)
#
#
  insmod=no
  # What do they think /dev/watchdog is named?
  MISCDEV=`grep ' misc$' /proc/devices | cut -c1-4`
  MISCDEV=`Echo $MISCDEV`
  WATCHDEV=`ha_parameter watchdog`
  WATCHDEV=`Echo $WATCHDEV`
  if
    [ "X$WATCHDEV" != X ]
  then
    : Watchdog requested by $CONFIG file
  #
  #	We try and modprobe the module if there's no dev or the dev exists
  #	and points to the softdog major device.
  #
    if
      [ ! -c "$WATCHDEV" ]
    then
      insmod=yes
    else
      case `ls -l "$WATCHDEV" 2>/dev/null` in
      *$MISCDEV,*)
	    insmod=yes;;
      *)	: "$WATCHDEV isn't a softdog device (wrong major)" ;;
      esac
    fi
  else
    : No watchdog device specified in $CONFIG file.
  fi
  case $insmod in
    yes)
      if
        grep softdog /proc/modules >/dev/null 2>&1 
      then
        : softdog already loaded
      else
        $MODPROBE softdog nowayout=0 >/dev/null 2>&1
      fi;;
  esac
  if
    [ "X$WATCHDEV" != X -a ! -c "$WATCHDEV" -a $insmod = yes ]
  then
    minor=`cat /proc/misc | grep watchdog | cut -c1-4`
    mknod -m 600 $WATCHDEV c $MISCDEV $minor
  fi
} # init_watchdog_linux()


#
#	Start the heartbeat daemon...
#

start_heartbeat() {
  if
    ERROR=`$HA_BIN/heartbeat 2>&1`
  then
    : OK
  else
    return $?
  fi
}


#
#	Start Linux-HA
#

StartHA() {
  EchoNoNl "Starting High-Availability services: "

  if
    CrmEnabled
  then
    : OK
  else
    $HA_NOARCHBIN/ResourceManager verifyallidle
  fi
  if
    [ $USE_MODULES = 1 ]
  then
    #	Create /dev/watchdog and load module if we should
    init_watchdog
  fi
  rm -f $RUNDIR/ppp.d/*
  if
    [ ! -d $RUNDIR/heartbeat ]
  then
    mkdir -p $RUNDIR/heartbeat/ccm
    mkdir -p $RUNDIR/heartbeat/crm
    chown -R hacluster:haclient $RUNDIR/heartbeat
    chmod -R 750 $RUNDIR/heartbeat
  fi
  if
    [  -f $HA_DIR/ipresources -a ! -f $HA_DIR/haresources ]
  then
    mv $HA_DIR/ipresources $HA_DIR/haresources
  fi
  #	Start heartbeat daemon
  if
    start_heartbeat
  then
    echo_success
    return 0 
  else
    RC=$?
    echo_failure $RC
    if [ ! -z "$ERROR" ]; then
      Echo
      Echo "$ERROR"
    fi 
    return $RC
  fi
}

#
#	Ask heartbeat to stop.  It will give up its resources...
#
StopHA() {
  EchoNoNl "Stopping High-Availability services: "

  if
    $HA_BIN/heartbeat -k >/dev/null 2>&1	# Kill it
  then
    echo_success
    return 0
  else
    RC=$?
    echo_failure $RC
    return $RC
  fi
}

StatusHA() {
  $HA_BIN/heartbeat -s
}

StandbyHA() {
  auto_failback=`ha_parameter auto_failback | tr '[A-Z]' '[a-z]'`
  nice_failback=`ha_parameter nice_failback | tr '[A-Z]' '[a-z]'`

  case "$auto_failback" in
    *legacy*)	echo "auto_failback is set to legacy.  Cannot enter standby."
		exit 1;;
  esac
  case "$nice_failback" in
    *off*)	echo "nice_failback is disabled.  Cannot enter standby."
		exit 1;;
  esac
  case "${auto_failback}${nice_failback}" in
    "")	echo "auto_failback defaulted to legacy.  Cannot enter standby."
		exit 1;;
  esac

  echo "auto_failback: $auto_failback"
  if
    StatusHA >/dev/null 2>&1
  then
    EchoNoNl "Attempting to enter standby mode"
    if
      $HA_NOARCHBIN/hb_standby
    then
      # It's impossible to tell how long this will take.
      echo_success
    else
      echo_failure $?
    fi
  else
    Echo "Heartbeat is not currently running."
    exit 1
  fi
}

#
#	Ask heartbeat to restart.  It will *keep* its resources
#
ReloadHA() {
  EchoNoNl "Reloading High-Availability services: "

  if
    $HA_BIN/heartbeat -r # Restart, and keep your resources
  then
    echo_success
    return 0
  else
    RC=$?
    echo_failure $RC
    return $RC
  fi
}

RunStartStop() {
  # Run pre-startup script if it exists
  if
    [  -f $HA_DIR/resource.d/startstop ]
  then
    $HA_DIR/resource.d/startstop  "$@"
  fi
}

RC=0
# See how we were called.

case "$1" in
  start)
	StartLogd
	RunStartStop pre-start
	StartHA
	RC=$?
	Echo
	if
	  [ $RC -eq 0 ]
	then
	  [ ! -d $LOCKDIR ] && mkdir -p $LOCKDIR
	  touch $LOCKDIR/$SUBSYS
	fi
	RunStartStop post-start $RC
	;;

  standby)
	StandbyHA
        RC=$?;;

  status)
	StatusHA
	RC=$?;;

  stop)
	RunStartStop "pre-stop"
	StopHA
	RC=$?
	Echo
        if
          [ $RC -eq 0 ]
        then
          rm -f $LOCKDIR/$SUBSYS
        fi
        RunStartStop post-stop $RC
	StopLogd
	;;

  restart)
        sleeptime=`ha_parameter deadtime`
	StopHA
	Echo
	EchoNoNl Waiting to allow resource takeover to complete:
	sleep $sleeptime
	sleep 10 # allow resource takeover to complete (hopefully).
	echo_success
	Echo
	StartHA
	Echo
	;;

  force-reload|reload)
	ReloadHA
	Echo
	RC=$?
	;;

  *)
	Echo "Usage: $0 {start|stop|status|restart|reload|force-reload}"
	exit 1
esac

exit $RC