# LaTeX2HTML by Nikos Drakos <nikos@cbl.leeds.ac.uk>
# **************************************************
# Change Log ***************************************
# **************************************************
#
# Please use the following style: Add your (unique) initials to the list below.
# Use your initials whereever you make commented changes.
# To get in correlation with the more verbous explanations you make in the
# change log, or if you want to stress meaningful changes, use an additional
# short (about 3 letters) identifier, unique together with your initials,
# eg. jcl-pag. This also helps others to find your changes.
# If any change affects former changes, this *must* be stated in the log,
# together with a reference to the previous log entrie(s).
#
# nd = Nikos Drakos <nikos@cbl.leeds.ac.uk>
# ab = Axel Belinfante <Axel.Belinfante@cs.utwente.nl>
# ac = Andrew Cole <ajcole@cbl.leeds.ac.uk>
# wb = William Perry <wmperry@edu.indiana.ucs.mango>
# bh = Bob Hendley <R.J.Hendley@uk.ac.bham.cs>
# rst = Robert S. Thau <rst@edu.mit.ai>
# dm = David Martland <David.Martland@uk.ac.brunel>
# rjw = Roderick Williams <rodw@cbl.leeds.ac.uk>
# jr = Jussi Rahola <Jussi.Rahola@csc.fi>
# ec = Eric Carroll <eric@ca.utoronto.utcc.enfm>
# tl = <little@com.dec.enet.nuts2u>
# fz = Franz Vojik <vojik@de.tu-muenchen.informatik>
# spqr= Sebastian Rahtz <spqr@ftp.tex.ac.uk>
# up = Ulrich Pfeifer <pfeifer@de.uni-dortmund.informatik.ls6>
# aa = Alberto Accomazzi <alberto@cfa.harvard.edu>
# wr = Wolfgang Riedel <wolfgang.riedel@de.tu-chemnitz.hrz>
# alo= Alex Lopez-Ortiz <alopez-o@ca.uwaterloo.barrow>
# mb = Michael Francis Brantley <brantley@EDU.Princeton>
# mcb= Michael C. Grant <mcgrant@edu.stanford.rascals>
# jz = Jelle van Zeijl <jvzeijl@isou17.estec.esa.nl>
# bs = <boris@cs.rochester.edu>
# jhf = James Freeman <freeman@Cornell-Iowa.edu>
# hpr = Hal Peterson <hrp@com.cray.sdiv>
# kc = Ken Cox <kenc@com.viewlogic>
# gp = George Phillips <phillips@ca.ubc.cs>
# tw = Thomas Wieland <thomas_w@de.uni-bayreuth.mat.btm2x7>
# dh = Dirk Husemann <Dirk.Husemann@informatik.uni-erlangen.de>
# bt = Brian Toonen <toonen@mcs.anl.gov>
# gg = Graham Gough <graham@cs.man.ac.uk>
# kz = Kenny Zalewski <zalewk@rpi.edu>
# tm = Tim MacKenzie (t.mackenzie@trl.oz.au)
# mk = Martijn Koster (m.koster@nexor.co.uk)
# ew = Evan Welsh <welsh@uk.ac.ed.epcc>
# re = Robert Estes <estes@ece.ucdavis.edu>
# rw = Richard Walker <richard@cs.anu.edu.au>
# sl = Stefan Lohrum <lohrum@inf.fu-berlin.de>
# kl = Kris Laporte <kl@sunbim.be>
# gg = Gordon Greene <greeng3@rpi.edu>
# pb = Pascal Brisset <brissetp@poly.polytechnique.fr>
# po = Pieter Olivier <olivierp@fwi.uva.nl>
# eb = Ethan Bradford <ethanb@ptolemy.astro.washington.edu>
# ev = Eric Verbeek <wsineric@win.tue.nl>
# tt = Tom Tromey <tromey@busco.lanl.gov>
# ms = Mike Stok <Mike.Stok@meiko.concord.ma.us>
# sk = Stefan Kaes <kaes@lssun001.DresdnerBank.de>
# psm = Peter Magnusson <psm@sics.se>
# mb = Martin Boyer <gamin@ireq-robot.hydro.qc.ca>
#segal= Mark Segal <segal@spud.asd.sgi.com>
# jmn = Mark Noworolski <jmn@eecs.berkeley.edu>
# meh = Marcus Hennecke <marcush@crc.ricoh.com>
# hws = Herbert W Swan <hswan@perc.Arco.com>
# jkr = Jens Krinke <krinke@ips.cs.tu-bs.de>
# sid = Sidik Isani <isani@cfht.hawaii.edu>
# rml = Rob Malouf <malouf@csli.stanford.edu>
# jtc = Ted Cox <jtcox@gumby.syr.edu>
# pns = Paulo Ney de Souza <desouza@math.berkeley.edu>
# tkm = Tom Miller <tkm@eos.ncsu.edu>
# mg = Michel Goossens <Michel.Goossens@cern.ch>
# ays = Andreas Schott <schott@rzg.mpg.de>
# jfr = J. Freeman <jfreeman@ms.com>
# mer = Michael Ernst <mernst@cs.rice.edu>
# rrm = Ross Moore <ross@maths.mq.edu.au>
# jcl = Jens Lippmann <lippmann@rbg.informatik.tu-darmstadt.de>
# dtp = D. Taupin <taupin@lps.u-psud.fr>
# mwk = Martin Wilck <martin@kassandra.tropos.de>
# mcm = Barry McMullin <McMullin@EENG.DCU.IE>
# tak = Takashi Tomokiyo <tomokiyo@trc.rwcp.or.jp>
# mro = Marek Rouchal <marek@saftsack.fs.uni-bayreuth.de>
# bv = Boris Veytsman <boris@plmsc.psu.edu>
# kr = Keith Refson <Keith.Refson@earth.ox.ac.uk>
# uw = Uli Wortmann <uli12@bonk.ethz.ch>
#
#
#------------------- Test Suite Manifest ----------------------------------
#
# A listing of current test suites.
# These suites should be run before any new version is released.
# For a detailed description consult the suite's header.
# Feel free to devise further test suites, but *comment* them (see
# jcl-pag.tex header on how to comment).
#
# docs/manual.tex The l2h manual.
# example/report.tex An example with segment document parts.
# tests/pages.tex Tests image generation of l2h.
# tests/rrm-col.tex See log.
# tests/jcl-pag.tex See log.
# tests/jcl-env.tex See log.
# tests/jcl-verb.tex See log.
#
#--------------------------------------------------------------------------
#
# CHANGE LOG FOR THE LATEX2HTML RELEASE
#
# What is recorded here are changes to any file of the LaTeX2HTML release
# *meaningful to the user*, such as new options or files, important bug
# fixes etc.
# A more detailed log history can be found within the particular files, near
# the top.
#
#
#--------- v98.1 (compiled by jcl)
#
# Changes in the top-level directory:
#
# rrm latex2html.config
# jcl - New section header strings in &english_titles (corresponding
# entries also in german.perl, french.perl):
# $ref_title - this text heads the References section
# $pre_title - for preface
# $child_name - this text heads the table of child links
# $prf_name - for proofs
# - added variables for tex and initex for use with the -ldump
# feature
# The -ldump switch will help to speed up image generation
# with *subsequent* runs on your document.
# - added command line option -unsegment and $UNSEGMENT
# Use latex2html -unsegment, or texexpand -unsegment, or set
# $UNSEGMENT to 1 in latex2html.config
# (see texexpand changes)
# - added defaults for bolder images of gray background
# - provide optional value for $TMP --- location of a tmp directory
# - provide default for $GENERIC_WORDS to be omitted from filenames
# when using the -long_titles switch
# (see also german.perl, french.perl)
#
# rrm latex2html
# (uw) - patch for -no_subdir bug, reported by Thomas Anders dta@dsapp2.hmi.de
# (jcl) - &cleanup deletes ${PREFIX}images.dvi
# - fixed bug whereby \item s were combined --- lack of unique brace id
# - fixed missing-space bug that killed math-images
# - implemented scheme to allow alternative address formats
# - address-data default is ISO conformant
# - added translation of \institute as part of the title page settings
# - change to -link so that -link +<num> puts mini-TOC on leaf pages
# and -link <num> puts no mini-TOC on these lowest-level pages;
# Alternatively, set $MAX_LINK_DEPTH to be negative for these mini-TOCs
# - new switch -ldump to use ldump.sty when making images,
# this speeds up processing on the 2nd and subsequent runs;
# - fully implemented dependency of counters;
# - implemented \expandafter and \noexpand with special care concerning
# case-changing macros;
# - fixed bug whereby `0' in math was getting lost;
# - allow alternative source for icons, using $ALTERNATIVE_ICONS
# - implemented on-the-fly \renewcommand
# - \renewcommand meta-commands are now wrapped, so that they are
# re-processed *before* there replacement text is processed.
# Otherwise bad LaTeX code can get into images.tex
# (Thanks to Michael Hall for an example of this.)
# - \newcommand both warns *and* replaces existing macros
# - more care over \limits macro
# - fixed a bug whereby some macro-expansions didn't work correctly
# - fixed printing of \the<counter> macros, with dependent counters
# - NEW: implementation of document-classes and styles
# allows file for classes and options and option-class pairs
# - implemented $INFO-page options
# - fixed error with minipage footnote numbering
# - implemented \numberwithin (from AMS-packages)
# - fixed error in DTD declaration
# - implemented \nobreakspace and \nonbreakingspace (AMS-packages)
# - Added support for Override.pm to latex2html
# - added command line option -unsegment and $UNSEGMENT
# Use latex2html -unsegment, or texexpand -unsegment, or set $UNSEGMENT
# to 1 in latex2html.config (see texexpand Changes)
# - **major**
# introduced a font/size state-stack concept to handle nesting
# of tags altering size and font-face within text-level data.
# It also affects macros which create block-level tags.
# The @open-tags list has to be cleared, tags inserted,
# then @open-tags recovered for the new paragraph, say.
# - font/size-changing commands are declared as `deferred'
# so as to be processed in sequence with environments
# \par \bigskip \medskip etc. are similarly `deferred'
# - the switch -tmp 0 uses /tmp as a tmp-directory
# - special characters can be `escaped' in macros that construct
# {rawhtml} environments
# - \newcommand \newenvironment \def definitions are more efficient
# macro substitution is *much* faster, using an array mechanism
# - support for HTML 4.0, including style-sheets
# - faster processing on user-defined macro replacements
# - faster processing of .aux files
# - improvments to ensure validity of the HTML code, wrt DTDs
# - many LaTeX macros use an extra indirection, so that it
# becomes much easier to cope with tag-balancing and styles;
# this also shortens the code somewhat.
# - the declared environments are similarly handled indirectly.
# - processing of the .aux file and user-defined macros handle
# smaller chunks of text, rather than the whole document;
# for the .aux file, each line is handled separately
# for macro-replacement, a \par command serves as a delimiter
# (since it is illegal within most (La)TeX macros).
# - other parts of the processing are done using arrays, to lessen
# the length of strings that might otherwise be copied.
# - when $USING_STYLES is set, a CSS style-sheet is generated,
# indicating the style used in each environment, and providing
# a unique ID to such environments. This CSS style-sheet can be
# subsequently edited, if desired.
# - \label and \index commands in section-headings work better,
# (the anchor is placed before the heading tag)
# also a forward-search is now conducted for these.
# - handling of charsets and input encodings is much improved.
# - moved some variables to establish defaults before .config or -init
# files are read.
# - introduced variables $image_pre and $IMAGE_PREFIX to control names
# used for the intermediate files created by dvips and pstoimg
# - implemented \textsc fully --- now 8-bit characters are case-folded too
# - create images anti-aliased against a gray background. Characters are
# bolder, without (almost) white edges against gray.
# new variables $LOAD_LATEX_COLOR and $LATEX_COLOR control this.
# - new switch -numbered_footnotes setting $NUMBERED_FOOTNOTES
# - \begin/endgroup and $b/egroup commands write directly into images.tex
# - defined &do_cmd_footnote* since \footnote*{...} is a common in TeX
# - defined &do_cmd_MF for the Metafont logo
# - support for pre-processors when making images of non-latin script
# code for generating images is placed into file: images.pre
# pre-processor commands are placed into file: preproc
# preproc is run as a script, producing: images.tex
# image generation then proceeds as normal.
# - pseudo-environments for font/styles are given better support
# and TeX's \font command is implemented
# e.g. {\bf ... } {\wncyr .... }
# the control-sequence is found and the grouping is treated as an
# environment, rather than waiting to handle it as a command.
# - theorem commands and styles are implemented;
# covers the {theorem} and {amsthm} packages.
# - footnotes have hyperlink back into the main text.
# - footnotes can have images in the footnote marker `word'
# - section numbering is rationalised to be more in-step with LaTeX
# the HTML numbering is unchanged, via @curr_sec_id
# in-text macros, like \value \setcounter \thesection get their
# number from $global{'section'} etc.
# \section advances both counters, but \section* only the HTML one.
# - changed the $NO_ACCENT_IMAGES variable instance to $ACCENT_IMAGES
# - added %numbered_section hash for initialising $global counters
# in &initialise_sections
# - some name changes of auxiliary files usage of temporary directories
# to get it running on DOS (thanks to Daniel Taupin)
# - implemented \theoremstyle , \theorembodyfont , etc.
# - added to the TeX code in images.tex for finer control with accents
# - inserted binmode(IMAGE) when scanning bitmaps for size
# (thanks, Daniel Taupin)
# - changes to the way captions are found and handled
# - new switch: -iso_language to get the correct DTD with mixed-languages
# - minipage environments can capture a caption, when inside figure/table
# - implemented \eqref (from AMS-TeX)
# - implemented \topcaption \bottomcaption \middlecaption commands
# - implemented use of 2 temp directories:
# $TEMPDIR for image-processing, usually subdir of /tmp
# TMP subdir of working directory, for the (formerly) TMP_ files
# - sectioning commands in expansions of \newcommand work properly now
# (thanks to Azat Badretdinov for finding the cause)
# - improved the handling of simple math generally
# - changed name \HTML to \HTMLcode ; \HTML remains as an alias
# - minor changes in images.tex to avoid some `cropping bars' remaining
# - itemize works properly, with explicit \item[...]
# bullets implemented as images, for other \item s
# - \tag is recognised in equation environments, with all math modes
# - \authorURL make the \author information into a hyperlink
# - \email adds to the title-page info
# - made \large and \small use <FONT SIZE....> tags
# - added declarations for \smaller and \larger
# - change to &do_cmd_mbox so that it doesn't try to make an image
# of the code that may already have an image_marker
# This allows \mbox{$...$} to be used with macro-replacements
# - improvements to &make_long_title to cope with accents, etc.
# - implemented -no_fork switch for $NOFORK variable
# - replaced system `cat` command with a platform-independent version
# - implemented \usecounter use within {list} environments
# - long-titles are restricted to 27 characters +(.html) = 32 chars
# - suppressed warning messages for `array` and `theorem` packages
# - use $BODYTEXT with the footnotes page (thanks Andreas Otte)
# - figure/table captions aren't also included in images
#
# NEW Override.pm
# This file is intended to hold OS-specific definitions that
# the latex2html or other scripts may require during runtime.
# Thanks go to Marcus Hennecke, Axel Ramge, Uli Wortmann and
# many others who helped with their suggestions.
# This is a step towards an operating system independent
# LaTeX2HTML which is currently under work.
#
# jcl configure-pstoimg
# - safer renaming of substitute files to .bak (lost files reported)
# - dies with message unless initialized via install-test
#
# jcl install-test
# rrm - some revisions for 98.1, see log of that file
#
# rrm pstoimg, pstoimg_nopipes
# uw - adjusted to use the Override.pm module with Perl5
# jcl - removed the PaperSize bug
# - handles absolute file names and temp dirs correctly
#
# jcl texexpand
# rrm - small fix to &interprete, \input|include now doesn't loose the
# uw comment if merging fails
# - added command line option -unsegment and $UNSEGMENT
# Use latex2html -unsegment, or texexpand -unsegment, or set
# $UNSEGMENT to 1 in latex2html.config.
# This will force a segmented document to expand its segment
# files, so that it may be processed as a whole with LaTeX2HTML.
# Use this feature to test a segmented document or whenever a
# document needs to be fully expanded.
# - Added support for Override.pm to texepand.
# - generalised pattern for matching verbatim-like environments
#
# NEW packages:
#
# IndicTeX-HTML/
# rrm provided IndicTeX-HTML, a collection of Perl and LaTeX styles
# to translate IndicTeX documents (see README)
#
# foilhtml/
# bv provided FoilHTML, a package for translating FoilTeX documents
# (see readme.v12)
#
# Changes in the styles/ directory:
#
# rrm alltt.perl
# reimplemented the {alltt} to use <TT> rather than <PRE> now
# style changes can be handled properly, with valid tag nesting
#
# NEW rrm amsart.perl, amsbook.perl
# New files --- support AMS document class
#
# rrm amsfonts.perl
# pass \mathbb commands to LaTeX
#
# rrm amsmath.perl, amstex.perl
# various changes (see log history in that files)
#
# rrm babel.perl
# - parametrised the loading-mechanism:
# a single line now suffices for each new language
# - added such lines for `french' and `francais' (NB. Michel Goossens)
# -- fixed error in file-loading
#
# NEW rrm article.perl, book.perl, letter.perl, report.perl, slides.perl
# Document-class emulation file
# -- adjusts the \the<counter> macros for sectioning commands
# -- suppresses warnings for standard class-options
#
# NEW kr chemsym.perl
# There may be some problems with accents, whose TeX macro names
# correspond to chemical symbols, as defined here --- there is no
# compensation provided within this implementation.
#
# rrm latex2html.config, francais.perl, french.perl
# jcl german.perl, germanb.perl
# - with -long_titles, use $GENERIC_WORDS list to shorten the title.
# - brought &german/french_titles up to date with &english_titles
#
# rrm graphics.perl, graphicx.perl
# - modified \graphicspath to parse a list of directories (Axel Ramge)
# - rewritten the &do_cmd_graphicspath subroutine
# works correctly and allows multiple use, outside the preamble
# - handle \DeclareGraphicsRule and \DeclareGraphicsExtension
# - \graphicspath works correctly in the preamble now
#
# rrm heqn.perl
# recognise \htmlborder and \htmlimage also in processed environments
#
# rrm html.perl
# \htmlmeta defined, for inserting <META...> tags
#
# NEW rrm inputenc.perl
# Implements the inputenc package, allowing the character encoding
# to be specified from within the document.
# Supports latin1, latin2, latin3, latin4, latin5, latin6, Unicode.
# This uses files latin1.pl to latin6.pl and unicode.pl
# in the versions/ directory.
#
# rrm makeidx.perl
# -- fixed problem with sub-item keys printing multiply
# -- \index commands within section-heads now work correctly
#
# NEW rrm more_amsmath.perl
# That part of amstex.perl and amsmath.perl that needs the `math'
# extension has been split-off into more_amsmath.perl .
# This is loaded automatically with switches:
# -no_math -html_version ...,math
#
# rrm natbib.perl
# Updated for compatibility with natbib.sty v6.6
# - all \cite... commands have a *-version and 2 optional arguments
# - Harvard emulation is now automatic
# - implemented \citep*
# - fixed \harvardurl to work properly and without html.sty
# thanks to James A. Bednar <jbednar@cs.utexas.edu> for noticing
#
# NEW rrm seminar.perl
# implements seminar.sty by:
# making \newslide into a sectioning-command, with its own numbering
# other commands are recognised and largely ignored
# text of `notes' are gobbled
#
# rrm supertabular.perl
# implemented the \tablehead \tabletail etc. commands
#
# rrm xy.perl
# - allow for optional argument to \newxycolor and \newgraphescape
# - recognise \htmlborder and \htmlimage also in processed environments
#
# Changes in the versions/ directory:
#
# jcl html2_1.pl, html2_2.pl, html3_0.pl, html3_1.pl, html3_2.pl
# renamed html*.*.pl files, for DOS
#
# rrm html2_2.pl (equal to table.pl)
# {tabular} environments could pick up caption from previous {table}
#
# rrm html3_1.pl (equal to math.pl)
# with $NO_SIMPLE_MATH, force images of \...matrix environments
# - fixed bug which affected the code for image-making
# - fixed bug not handling \lefteqn in {eqnarray}s
# - allow Netscape's VALIGN="BASELINE" for {eqnarray} rows
# - correctly writes {eqnarray*}, not {eqnarraystar} to images.tex
# - recognises \le (as well as \leq) without warning (thanks Michel)
# - automatic recognition of the differential `d' after \int
# - significant additions to math-parsing
# additions:
# \mathop,\mathrel,\mathbin, etc. recognised;
# sup/subscripts handled a little differently;
# array-like environments need to have delimiters protected,
# when they occur as sub-environments of other array-like envs;
# get equation-number from \\theequation not &do_cmd_....
# equation-numbers can have variable delimiters, not just (..);
# some AMS commands implemented always
# \text trated as \mbox --- not best, only temporary
# - fixed spacing/line-break problems
# - implemented \text properly, within math
# - fixed `missing 0' error with sup/subscripts
# - adapted for $USING_STYLES ; e.g. with HTML 4.0
# - adapted to allow use of Unicode entities for math-symbols
# - allow some fractions to be given as named entities; e.g. frac12
# - font styles/faces are now supported with properly nested tags
# - support for \strut and \vrule and \hrule
# - use the MATH and BOLDMATH classes when $USING_STYLES
# - always make images of some math operators
# - always make image of variable-sized operators
# - catch fractions via \frac \tfrac \dfrac
# - use a specified WIDTH="10%" for equation-numbering cells
# - made all numbering environments have WIDTH="100%"
# - introduced variables $math_start_rx and $math_end_rx .
# (looking ahead to the possibility of allowing $ to be non-math.)
# - fixed problem with superscripts: ' (\prime) missing from images
# - \mathbf , \mathcal etc. seem to be correct now
# - fixed bug causing some fractions to be in \textstyle, not displayed
# - fixed some string tests that incorrectly treated 0 as ''
# - recognise \htmlimage and \htmlborder in processed environments also
# ... and various other changes (see log history of that file)
#
# rrm html3_2.pl
# - Implemented {tabular*} environment, to be same as {tabular}
# i.e. does not recognise a fixed width
# - the \extracolsep macro is recognised, but ignored
# - sub-environments of {tabular}s are processed first;
# this allows {tabular}s to be nested
# - \multicolumn now implemented
# - cells containing `0' now show it, rather than being empty
# - {eqnarray} math-style bug fixed
# - allow Netscape's VALIGN="BASELINE" for {eqnarray} rows
# - removed unnecessary <BIG> tags, when {eqnarray} cell is an image
# - reworked the handling of @-expressions in tabular specs.
# - remove &simple_math_env acting twice on the same math --- Ugh!
# - implemented the extra tabular declarations from array.sty
# - ignore and \PreserveBackslash commands
# these extensions are **untested**
# - adapted the alignment environments to work as instances of
# &declared_env which respects the font/size state-stack.
# - adapted some environment-like commands to work with style-sheets
# - fixed migrating captions error; thanks to Keith Andrews
# - use a specified WIDTH="10%" for equation-numbering cells
# - made all numbering environments have WIDTH="100%"
# - improvements to {eqnarray} environments:
# each field is handled separately, equation-numbering works
# eqn-numbering aligned OK now;
# - VALIGN on rows in {tabular} is not used, unless $NETSCAPE_HTML
# - introduced \mathon and \mathoff for use in tabular-specs
# - implemented \tablehead and \tabletail (from supertabular.sty)
# - implemented the @{...} and !{...} column-specs as separate columns
# without slots for filling from the table-data.
# - \tag and \notag now work correctly in normal math-mode
# - fixed some string tests that incorrectly treated 0 as ''
# - recognise \htmlimage and \htmlborder in processed environments also
# - make sure math within do_math_env is properly delimited
# - p{<width>} in a {tabular}'s col-spec causes VALIGN="TOP"
#
# NEW rrm html4_0.pl
# Implements output specific for HTML 4.0
# This requires LaTeX2HTML v97.2 (alpha) or later version.
# The variable $USING_STYLES is set, to enable automatic creation
# of a CSS style-sheet.
# To use a UTF-7 or UTF-8 Unicode charset, the unicode extension
# needs to be loaded also; else the Latin-1 charset is used.
#
# NEW rrm lang.pl
# contains the language codes, from i18n.pl
#
# Changes in the versions/ directory:
#
# rrm html.sty
# - uses Robin Fairbairns' code for ignored environments,
# replacing the previous comment.sty stuff.
# - extensions to the \tableofchildlinks command
# - extensions to the \htmlinfo command
# - allow the dummy {tex2html_nowrap} environment in LaTeX
# use it to make its contents be evaluated in environment order
# - implemented an optional argument to \begin for style-sheet info.
# - modified use of an optional argument with sectioning-commands
#
# NEW rrm ldump.sty
# ldump.sty --- LaTeX package which allows format dumps to be used.
# use the new -ldump switch to make use of this feature/package.
#
#
#
#--------- v97.1 (compiled mostly by rrm and also jcl)
# incorporating the changes of v96.2 (not officially released) by mro
#
#
# The \textsc{v97.1} release has significant improvements in:
#
# image-generation
# rrm is much faster, requires less memory
# and inline images are aligned more accurately;
#
# image quality --- thanks to Uli Wortmann
# rrm is greatly improved by the use of anti-aliasing effects
# for on-screen clarity, in particular with mathematics,
# text and line-drawings;
#
# memory-requirements
# rrm are much reduced, particularly with image-generation;
#
# mathematics
# rrm can now be handled using a separate parsing procedure;
# images of sub-parts of expressions can be created,
# rather than using a single image for the whole formula;
#
# macro definitions
# rrm having a more complicated structure than previously allowed,
# can now be successfully expanded;
#
# counters and numbering
# rrm are no longer entirely dependent on the \texttt{.aux}
# file generated by \LaTeX;
#
# decisions about which environments
# mro to include or exclude can now be made; see v96.2 .
#
# HTML effects
# rrm for which there is no direct \LaTeX{} counterpart
# can be requested in a variety of new ways;
#
# HTML code
# rrm produced by the translator is much neater and more easily
# readable, containing more comments and fewer redundant breaks
# and \HTMLtag{P} tags.
#
# error-detection
# rrm of simple \LaTeX{} errors, such as missing or unmatched braces,
# is now performed --- a warning message shows a line or two
# of the source code where the error has apparently occurred;
#
#
#
#--------- v96.2 (compiled by jcl)
# mro - Rewrote texexpand. Contains more logic and mimics the
# behaviour of LaTeX more closely. Supports DO_INCLUDE to
# force style file translation and filename extensions in
# (DO|DONT)_INCLUDE.
# mro - Rewrote pstogif and renamed it to pstoimg, as it now also
# produces PNG graphics. Added an automatic configuration
# script (configure-pstoimg). Supplied a patch for dvips-5.58f
# to enable production of EPSF format in multiple files.
# mro - Added configuration variable and command line switch
# LOCAL_ICONS: when set, the navigation icons are copied to
# the document directory.
#
#--------- v96.1 Rev h (compiled by jcl)
# 30-Sep-96
# tak - Fixed bug in optional argument of do_cmd_htmladdimg() in html.perl
# and embed_image(): ALT tag now properly gets transmitted to html.
# hws - uses %new_command and %new_environment instead of /$meta_cmd_rx/
# in process_ext_file()
# - Recover figure and table caption numbers when captions contain
# a ~ [in extract_captions()]
# - environments are not further processed when coming from .aux
# file in process_undefined_environments()
# - introduced translation for \ensuremath to force math expressions
# to be translated into HTML instead of computing an image.
# rrm - introduced latex-only command \etalchar...
# - cite labels fetched from .aux file if available, in do_cmd_bibitem()
# - added call to translate_environments() in do_env_enumerate(),
# do_env_itemize(), do_env_description(), do_env_list().
# - small fix in accent_safe_for_ij()
# - Non-inlined images now embedded in <BR>, not <P> tags.
# - introduced tex2html_nowrap environment.
# LaTeX commands wrapped with this environment go directly into images.tex.
# - introduced make_hbox(), make_vbox() for inlined images
# - check if $adjust is positive in top_justify()
# - changed text_cleanup() to prevent -- => - being applied twice,
# with headings, captions, etc.; thus --- correctly becomes -- not -
# - list items not strongified if $compact, in do_env_description()
# - introduced make_nowrapper(), make_inline_wrapper()
# - \bigskip now produces <P><P>
# - arguments of \message and \typeout now prompted during translation
# - slight change to process_cmds_in_tex()
# - introduced process_commands_nowrap_in_tex() and
# process_commands_inline_in_tex() to work with tex2html_nowrap resp.
# tex2html_wrap_inline environments.
# Changed list of ignored commands, built a list of nowrap commands.
# - raw arg cmds now also recognized if delimited by @ (eg. a\l@b).
# rrm-nac
# allow new commands \W for non-alphanumerics, not already defined.
# rrm-col
# - introduced $NESTING_LEVEL for counting group ({,} currently) nesting
# - hook for colors used at each section start, in translate()
# jcl - Removed bug in replace_cite_references(), a not executed
# replacement command concerning make_named_href(...).
# - The use of $global{'warnings'}, held in a DBM entry, led to
# subsequent DBM errors when the warnings accumulated to more
# than approx. 900 chars.
# The DBM data base is not used for 'warnings' any more:
# The warnings are now written to the file 'WARNINGS' in the
# directory where all output files reside. The file contents
# is displayed and the file removed at the end of the
# translation process.
# - A \clearpage command precedes the \end{document} of images.tex
# to force the last page to appear in the DVI file. The case
# in which this behaviour is needed is when a style file discards
# the \end{document} command or redefines it (eg. cweb.sty).
# - replaced $(PNMTILE) with $(PBMMAKE) in latex2html.config
# and install-test, changed right_justify() according to the
# suggestion by meh. Removed obsolete blank.pbm.
# - $(GIFTRANS) is preferred to the netpbm binaries if it's available.
# This encreases speed of gif translation significantly if one
# wants to use the (faster) netpbm instead of pbmplus.
# - Changed deal_with_texinputs() to set TEXINPUTS the following way:
# 1. . to let TeX find things from work dir (invocation of l2h)
# or dest dir (for images.tex)
# 2. .. to find things from work dir for images.tex (questionable)
# 3. absolute path to source file
# 4. dest dir, and, 5. $TEXINPUTS (suggested by rrm).
# - Re-arranged latex2html.config to make it more comprehensive:
# - shuffled entries without changing their meaning
# - slight improvements to documentation
# - introduced color variables
# - introduced down url/down title/contents url/index url defaults
# - Tidied l2h's synopsis both in usage() and the nroff section.
# - Introduced l2h options -auto_prefix, -prev_url, -prev_title
# - Introduced global variable $PREAMBLE. It is set to 1 if the text
# before \begin{document} or \startdocument is processed, and 0
# if the text after it is processed. It is *undef* before
# any text is translated.
# - In html.perl, URL in htmladdimg not reverted to raw TeX.
# Klaus Steinberger <http://www.bl.physik.tu-muenchen.de/~k2/k2.html>
# supposed this.
# This is conform with \htmladdnormallink now.
# - Introduced $LINKPOINT (see also latex2html.config), which is used
# to generate a directory index link if the document is finished.
# - Cosmetic changes: removed spaces, indented expressions etc.
# - grep doesn't understand -e on Solaris, fixed install-test
# jcl-env
# Content of environment (\begin{..}...\end{..}) will now be
# encapsulated in l2h open/close brackets internally.
# This will lead to the same behaviour as in TeX: Changes
# within the environment (esp. to font style) are really local
# and reverted when passing the end of the environment.
# jcl-pag
# An incomplete LaTeX command (eg. \theoremstyle{..}) that is
# passed to LaTeX through images.tex leads to an absent page in
# the resulting DVI file, causing all following pages and its
# images to be a page earlier than expected.
# To prevent this, invisible glue is added to each page entry.
# Then, in turn to prevent a page break between glue and overly
# long contents, the \textheight is set to 50cm. This also
# prevents page breaks within the contents (eg. a supertable).
# However, *very* long pages are cut by dvips itself. Anyway, we
# are rid of the 'images out of sync' problem. I'm aware of the
# log entries of Nikos, but couldn't reproduce the restrictions
# he stated.
# To make bug fixes easier an excerpt of the original text is
# added to its translation text in commented form, if $DEBUG.
#--------- v96.1 Rev g (compiled by hws)
# 12-Jun-96
# jcl - Supplied verbatim.perl style file for displaying an external file
# verbatim.
# - LaTeX called from l2h now reads the "images.tex" from
# the current directory before searching TEXINPUTS.
# - Changed &do_cmd_contentsline to be compatible with LaTeX 2.09
# (and 2e).
# jcl-verb
# Extensive changes in the &pre_process routine to handle things
# \verb strings in comments, and commands like \verbatimfile.
# hws - Fixed problem which ocurred when a section label began with
# a number. Allow double and single quotes to appear within
# section headings in segmented documents. Corrected a bug
# in &save_array_in_file which caused an incorrect labels.pl
# to be written. Added a \bodytext{text} command, which inserts
# "text" into the <BODY> ... </BODY> preamble of the current
# HTML document page. Depending on the browser, this may allow
# a specification of background and text colours. Added
# an additional "alt=text" parameter to the \htmlimage command to
# override the default ALT HTML tag for figures and tables.
# For LaTeX2e users, added an optional argument to the
# \htmladdimg command for the ALT tag. Upgraded floatfig.perl
# to floatflt.perl to utilize the floatflt package of
# Mats Dahlgren <mats@physchem.kth.se>.
# mwk - Made html2e.sty more compatible with the natbib package
# of Patrick W. Daly. Provided natbib.perl and nharvard.perl.
# rrm - Made GIFs used by htmllist.perl transparent and further changes
# to makeidx.perl. The file prefix now applies to images.tex,
# so that images for separate segments are kept separate.
# Hooks were added for packages to modify various links, and to
# to perform operations at the beginning of a document. Added
# sub make_named_href. Improved citation mechanism for
# segmented documents. Implemented mechanism for recognizing
# package options. The command \usepackage[option]{package}
# is now searched in the following order **after** package.perl
# is loaded:
#
# A. file named: <package>_<option>.perl
# in the local directory, given by ..
# (i.e. where the LaTeX sources reside)
#
# B. file named: <package>_<option>.perl
# in the styles/ directory or directories
#
# C. a subroutine named do_<package>_<option>
#
# rrm - Recognize named colors in crayola.perl and color.perl.
#
# mcm - Percent-signs within section headings now processed correctly.
# Subsection and subsubsection numbers are now properly retrieved.
#
#--------- v96.1 Rev f (compiled by rrm)
# 31-May-96
# hws - correlated debug/nondebug behaviors by fix in texexpand .
# and correctly remove multiple %%'s.
# jcl - allow \documentstyle and /or \documentclass from \input files.
# jcl - additions to german.perl
# rrm - reinstated unconditional use of &make_image_file .
# rrm - made $dir local in sub load_style_file_translations
# to avoid (unlikely) conflict with other uses of $dir .
# rrm - fixed incorrect variable name in sub top_justify .
# meh - improved copy_file routine.
# meh - reordered the img_tag subroutine so long alternatives come
# first.
#
# rrm - Improvements to Indexing, when using the makeidx package:
# - hyperlinks and labels can be specified inside \index{...},
# - styled text allowed, default style = bold
# - alternative compactified style for index-entry hyperlinks,
# new config-variable $SHORT_INDEX to request this style;
# set in .config file or by commandline option -short_index .
# - Also adds a Legend to the Index, with segmented documents,
# implemented by sub make_preindex constructing a $preindex
# using information stored in %index_segment by sub
# make_index_segment .
# - The child-links display for each segment is now tagged with
# <A NAME="CHILD_LINKS">, accessible from this Legend.
# - all aspects of Indexing work correctly with document segmentation.
# - reduced number of *.pl files created by segments: *index.pl now
# saves %sub_index, %index_labels, %index_segment, %printable_key
# arrays.
#
# rrm - added some version-control to changebar.perl using a
# control-sequence \cbversion . A LaTeX expansion is defined in
# docs/l2hman.sty .
#
# rrm - fixed html2e.sty and html.perl to put correct numbering of all
# sectioning levels into the .ptr files, when using segmentation.
# - Commencing a new \section now resets LaTeX's counters at lower
# levels; e.g. the {subsubsection} and all {...paragraph} counters,
# as well.
#
# rrm - new package justify.sty and justify.perl for implementing
# LaTeX's {flushleft}, {center} and {flushright} environments, as
# well as TeX's \leftline, \centerline and \rightline commands.
# This markup is supported by Netscape, and conforms to HTML 3.2
# proposals.
#
#
#--------- v96.1 Rev e (compiled by hws)
# 08-Apr-96
# hws - URLs in command-line options (e.g. -up_url) may now contain
# one or more ~'s. LaTeX .lof and .lot files are now scanned to
# obtain figure and table numbers. (This information is not
# contained in the .aux file for \include'd document segments.)
# The \@input{} command is now recognized.
# dtp - HTML files now have a newline for every <LI> item, so as
# to make them easier to edit manually.
# rrm - Document segments no longer need to reside in the same directory,
# as long as they have a common parent directory.
# The only information that is now saved in the XXX.pl parameter
# files is that which was introduced in that segment's own source
# file (as opposed to another source file via the \internal
# command.) Fixed a bug in html2e.sty which reserved a new TeX
# \write channel for every program segment. LaTeX is no longer
# called if the -no_images flag is specified. Change bars,
# citations, and indices are now handled more correctly across
# program segments.
# jcl - Multiple ~'s may now appear in the $LATEX2HTMLSTYLES
# installation variable to denote instances of the user's home
# directory. Each .perl file is now guaranteed to be read only
# once, even if it is specified in the source more than once.
#
#--------- v96.1 Rev d (compiled by hws)
# 10-Mar-96
# meh - Made the Perl code conform to strict syntactical conventions,
# eliminating compilation warnings.
# hws - Replaced the &cleanup routine with a faster one.
# Made the eqnarray* environment order-independent, so that
# it can be recycled with the -reuse option.
#
#--------- v96.1 Rev c (compiled by hws)
# 28-Feb-96
# hws - Improves document segmentation by permitting LaTeX sections
# to appear after the \segment command. (Also the index and
# information page may now be associated with the top-level
# segment, not just the bottom-level.) Output .pl files only
# when necessary for segmentation. (However, images.pl and
# labels.pl are still always generated.)
# \begin{latexonly} commands are now ignored if commented.
# Uses &navigation_panel if &top_navigation_panel is undefined.
# Ditto for &bottom_navigation_panel. Upgraded
# .dot-latex2html-init. Make duplicate GIFs hard links of
# each other so that they do not have to be recreated on a
# reuse run.
# meh - Translates subscripts and superscripts in inline equations
# using <SUB> and <SUP> markups if the HTML_VERSION is 3.1 or
# higher.
#
#--------- v96.1 Rev b (compiled by hws)
# 20-Feb-96
# meh - Removed ;SPM*; constructs from simple inline equations.
# hws - Restored the -no_images / -images_only mechanism.
#
#--------- v96.1 Rev a (compiled by hws)
# 15-Feb-96
# hws - Fixed bug in texexpand pertaining to verbatim environments
# in included files. Allow ~'s in htmllist icons.
#
#--------- v96.1 (compiled by hws)
# 05-Feb-96
# tkm - Fixed bug which prevented &make_transparent from non-figure
# environments when $TRANSPARENT_FIGURES is set to zero.
# hws - Fixed bug in htmllist.perl: ~'s in $ICONSERVER were
# being converted to blanks. Made latex2html die more
# gracefully upon interrupt. Specified that environments
# floatingfigure and wrapfigure are to be passed to TeX.
# Fixed bug in pstogif which caused ppmquant never to be called!
# Moved all command line defaults to latex2html.config.
# Added a -debug command line switch. Support the alltt package.
# Removed command line switch "dont_include". (Not needed.)
# Updated the manual (again) and included changebar.sty.
# Added the ability to segment documents. This required the
# addition of five new command-line switches. Image recycling
# now works even if a filename prefix is used. Added ability
# to pass starred versions of commands to TeX, and added
# \includegraphics and \includegraphics* to graphic[s,x].perl.
# Support unbreakable spaces. Guard against HTML tags appearing
# in up and down titles. Moved raw TeX support to texdefs.perl,
# and made it optional. Added better control over LaTeX font size.
# mg - Converted manual to standard LaTeX2e. Added epsfig.perl,
# color.perl. Removed duplicate entries in graphics.perl.
# meh - Made command parsing more like LaTeX's. Added commands
# \makeatletter and \makeatother. Fixed bug which caused HTML
# 3.0 table conversion to sometimes omit the caption.
# Provide support for HTML 2.1, with ISO 10646 Unicodes.
# Support itallic correction.
# ays - Added forgotten ${PREFIX} for footnode.html. Added missing
# $abs_title instead of Abstract. Created french_titles and moved
# french do_cmd_today to french.perl. Created links to
# germanb.perl and francais.perl for the sake of the babel
# package. Allowed other extensions than .tex for top-level-file.
# jfr - Fix a bug in getting current working directory.
# mer - Added calls to &pre_pre_process and &post_post_process
# for specialized user-defined applications. Typeset only
# the alphabetic portion of simple math expressions in itallic.
# Added installation variable $AUTO_PREFIX.
#
#--------- v96.1-beta (compiled by hws)
# 15-Jan-96
# hws - Fixed \htmladdimg, broken by a patch in v95.3. \labels,
# equations and images in section headings now work (Really!)
# Additional inline math equations can now be set in HTML. The
# "scale=" option of \htmlimage is fixed.
# rml - The comment removal regular expression in text_cleanup
# missed comments that occur on the first line of an included file.
# HTML 3.0 tabular not inside table inherited previous caption (fixed).
# I also added a call to replace_user_refereces, to allow style
# files to add new types of crossreferences.
# jkr - Now LaTeX2HTML uses two panels, one for the top and one for
# the bottom of the document. Made the translation of \today more
# similar to LaTeX's. Patched the verbatim-counter patch of
# #EI#. Removed the expansion of '\\' to '\\ ' in \verbatim.
# Added support for the TeX \char command.
# meh - Fixed treatment of @{} expressions in HTML 3.0 tables.
# Fixed treatment of \circ in math mode. Made german.perl
# compatible with HTML math 3.0 changes. Added width and
# height attributes to navigation panel icons. Replaced
# all occurences of tex2htmlindex with textohtmlindex.
# Added a check that compares the actual image files to
# remove duplicate images.
# dkw - Added a new command \latexhtml{LaTeX}{html} to process
# something in LaTeX one way, and in HTML another way.
# hws - Added a "flip=" option in \htmlimage. Caused \htmlref, etc.
# to use an external reference if an internal one is not found.
# Added support for \ensuremath and floating/wrapped figures.
# Ignore input after first /end{document} not shielded by
# verbatim or \verb. Overhauled method of image sharing and
# recycling. Made -reuse switch accept a reuse_option.
# Added installation variables $TEXINPUTS and $DVIPS_MODE.
# Made the .tex filename suffix optional. Provided support
# for \special's outside of defined environments. Supplied
# additional optional style files, htmllist and heqn. Updated the
# manual. Ignore "| and "- constructs in german.perl. Support
# the LaTeX2e babel package. Fixed bug in &read_mydb which
# appended redundant newlines to macro expansions. User-defined
# commands and environments can now have an optional argument.
# Provided stubs tor \suppressfloats and \enlargethispage.
# Added support for the LaTeX2e graphics package. Added command
# line switch -prefix. Changed TeX mode to \nonstopmode if
# $DEBUG is set. Made treatment of \document(style|class)
# consistent. Added \providecommand. Provided the makemap
# utility to construct active image maps.
# jtc - Added comment about the possible need to insert
# "use GDBM_File" for Linux platforms.
# pns - Improved error reporting in install-test. Corrected errors
# in &iso_latin1_character_map and &iso_latin1_character_map_inv.
# tkm - Remove optional space argument to \\ in 3.0 tables.
# Even the inter-item spacing in list environments.
# Made description tags be bold (as in LaTeX).
# alo - Corrected bugs in &write_string_out, &special_env,
# and &make_new_cmd_rx. Fixed bug in macro tokenization,
# which sometimes caused macros not to be expanded in math mode.
# sid - Corrected an error in the making of transparent images.
# Added more error checking in install-test.
#
#--------- v95.3 (compiled by jmn)
# 15-Nov-95 meh really - added tables (HTML 3.0) support. And support
# for math format too - not enabled by default. Wow!
# Made pstogif/latex2html detect blank images and remove IMG tags
# pointing to them.
# Added two switches: up_url and up_title - to spec the parent document
# jmn - updated pstogif to use the ppmraw driver in ghostscript -
# currently, DEPTH value is silently ignored - default gif output is
# the same as it was before (except now it works on my decstation).
# Also added in badfree perl5 patches from the ftp site. removed
# references to pstoppm.ps in install-test
# hws - Added an optional argument align=<arg> to \htmlimage for
# the alignment of table and figure gif files. Added dbmclose calls.
# Improved support for active image maps.
# krn - numerous minor fixes including language support, comment
# stripping, removal of extraneous spaces, and LATEX2HTMLSTYLES as a
# path list
# sid - Patch to generate fonts at appropriate scales for screen
# viewing. Note that this uses a .dvipsrc file in the latex2html
# directory. This is probably a bad idea, but some dvips versions
# unfortunately don't handle the -mode option.
#
#--------- v95.1
# 20-Jan-95 nd - Fixed spurious syntax error in latex2html.config
#--------- v95
# 13-Jan-95 mb - Added ppmquant filter in pstogif to make sure the GIF
# images contain less than 256 colors
# nd - Removed redundant call to finger in address_data
# nd - Fixed pattern matching problem during \def processing
# nd - Stopped using the -path option in "type $what" in install-test
#--------- v0.7a5
# 11-Jan-95 nd - Fixed problem with HTML encodings of ISO-LATIN1 characters
# creeping into converted images of figures and tables by defining
# an inverse mapping from such characters back to the original Latex
# encodings
# 10-Jan-95 nd - Added new global variable $PAPERSIZE in latex2html.config
# to make it easier to change the default behavior when converting
# large images
# nd - Fixed problem with passing results from child to parent processes
# through DBM files by closing and reopening the DBM files on crossing
# process boundaries
# nd - Fixed the hierarchical index building to deal with duplicate
# index keys. Also fixed it to close the description list (<DL>) properly
# nd - Fixed problem in process_command which instead of collapsing
# spaces following a command it was introducing them
# 9-Jan-95 nd - Fixed problem with duplicated input files caused by
# the parent process not waiting for each child finish
# nd - Fixed looping problem with \input files caused by forked processes
# messing up the parent's input stream. The fix was to save the position
# in the input stream and then return to it after the child has exited.
# mb - Support for internationalization. A global variable
# can now be set in latex2html.config to change the titles of generated
# sections (eg "Table of Contents", etc)
# segal- Ingenious code to fix equation baseline alignment. This adds
# instructions in the images.tex file so that information about
# equation size is printed in the log file. This information is used
# to determine whether to add extra white space at the bottom of the
# equation and then changing the alignment mode...
# nd - Incorporated the equation alignment code with the off-line
# image generation mechanism. This required another DBM database and
# also LaTeX to be run even when using the -no_images option in order
# to get at the log file (which determines equation alignment)
# 6-Jan-95 nd - Now will not create images.tex|pl or labels.pl unless there
# data to go in them. Also persistent DMB files are hidden in .XXX files
# ms - Now use getpwuid instead of whoami to get the user's name
# nd - Fixed problem with special characters (<>&) in -address argument
# - BUT it causes a problem for those who want to incude html
# in their signatures so it's back to the old behavior
# sk - Added shortcut commands \html and \latex for conditional text
# psm - Added support for hierarchical indices
# nd - Stopped replacing dashes (-- and ---) with a single hyphen
# nd - Changed waitpid($pid0) to waitpid($pid,1) in sub write_out_string.
# This cures the problem of repeated text from \input files
# 5-Jan-95 nd - Changed make_begin_end_env_rx not to eat spaces at the
# of the regexp *unless* we have a newline at the end (otherwise
# have trouble with inlined equations)
# nd - Hacked tokenize to deal with multiple newcommands on the same line
# nd - Changed do_cmd_sc not to capitalize latex2html markers!
# tt - Now use `sh -c "type $X` instead of `which $X`
# mb - Fixed texexpand to include files XXX.tex specified using \input{XXX}
# if XXX.tex in the TEXINPUTS path
# mb - Fixed to resolve figure and table numbers when captions contain
# accented characters
# mb - Fixed for dotless i's and accents
# mb - Added support for "named" bibtex style
# 4-Jan-95 nd - Fixed strange bug in ignore_commands code generator by
# removing some white space from command arguments
#--------- v0.7a4
# 21-Dec-94
#--------- v0.7a3
# 16-Dec-94 nd - Removed the "o" in /$sections_no_delim_rx / in sub translate
# because of problem with Perl 5.
# nd - Replaced all occurrences of \<n> in substitutions with $<n> for
# Perl 5 compatibility
# nd - Replaced all occurrences of @_[0] with $_[0]
# nd - Fixed bug in do_cmd_cite
# nd - Replaced all occurrences of $$ with $$\
# 14-Dec-94 nd - Added more information in the README file
# nd - Fixed problem with multiple bibliographies by incrementing $bbl_nr
# at the end of do_env_thebibliography. Also, multiple bibliographies
# are treated as separate sections
# tt - Fixed invocation of $GS to stop printing annoying messages
# 13-Dec-94 nd - Added a new variable $NETSCAPE_HTML in latex2html.config.
# If set some Netscape-specific HTML may be generated. At the moment,
# if it is set then the borders around inlined images will be removed.
# nd - Fixed problem in german.sty caused by changes in the main script
# nd - Changed process_command to collapse spaces following a command
# into a single space rather than remove them completely
# ev - Modified pstoppm.ps to use papersize aguments in gs. This is
# supposed to fix the problem of large inlined images but we are
# not quite there yet...
# nd - Modified pstogif to accept papersize argument and latex2html to
# call it with one but only if we are using pstoppm.ps
# nd - Changed make_begin_end_env_rx to eat spaces following a begin|end
# regular expression. Otherwise introduces <P>'s in concecutive
# environments. Verbatim environments seem unaffected.
# 12-Dec-94 nd - Fixed it to use optional arguments in caption commands
# nd - If latex2html is called with -split 0 then the footnotes are shown
# at the end rather than in a separate node
# nd - If $DEBUG is set then the images.tex file is not processed
# in batchmode (ie will see the messages from LaTeX on STDOUT)
# nd - Changed so that if called with -split 0 it will not use the filename
# when constructing TOC HREFs (it caused some browsers to reload)
#--------- v0.7a2
# 2-Dec-94 nd - Stopped enabling multi-line pattern matching ($*) throughout
# the translation. This causes problems with the /$get_next_pair_pr_rx/
# regular expressions which will match *any* line beginning with a
# bracket pair (ie a command argument). Instead multi-line pattern
# matching is enabled selectively when needed (eg for deleting blank
# lines)
# nd - Added tests for availability of DBM in install-test
# nd - Changed regular expressions which match next argument to skip
# over any comment characters
#--------- v0.7a1
# 1-Dec-94 nd - No changes - just pushing the release date into December :-)
#--------- v0.7a
# 29-Nov-94 nd - Added new option -no_reuse
# nd - Fixed problem in sub expand_code which caused latex2html to hung
# 28-Nov-94 nd - Fixed problem with capitalizing command names after an
# \sc command
# nd - NO longer necessary to get Giftrans if NETPBM is available
# nd - Changed to trap errors and define a local version
# if getcwd.pl is not in the Perl library
# nd - The \hyphenation command and its argument are now ignored
# 24-Nov-94 nd - When untarring the distribution a new directory which
# contains the version number in its name is created
# eb - Modified inlined images so that the background color is grey as
# well as transparent (for browsers like the alpha Mosaic for Windows)
# nd - Fixed so that citation labels in do_cmd_bibitem
# are processed by translate_command
# nd - Added config variable $TRANSPARENT_IMAGES in latex2html.config
# If set to 0 then "figure" environments will not be transparent
# nd - Modified install-test to prom`pt users to modify $GIFTOPPM
# if they are using the NETPBM library
# 24-Nov-94 eb - Added option -no_subdir so that the generated HTML files are
# placed in the current directory.
# nd - Changed so that -address "" is valid
# 23-Nov 94 nd - Support for "off-line" image conversion with two new options
# -no_images and -images_only. Some of the information necessary for the off-line
# conversion is kept in DBM files.
# 23-Nov-94 nd - Escaped the @ in "nikos@cbl" because of Perl 5 incompatibility
# 18-Nov-94 nd - Removed manual.ps from the distribution
# 15-Nov-94 nd - Added an anchor in the "References" heading
#--------- v0.6.5
# 10-Nov-94 nd - Added \clearpage back in the text of each image in images.tex
# Without it more than one figures may appear on the same page (it clears
# the accumulated floating bodies)
# nd - Added do_cmd_caption for tables than may be ignored...
# 7-Nov-94 nd - Stopped adding $arg .= "\\\\"; in sub process_commands_in_tex
# nd - Changed texexpand to print \input{XXX} even when XXX is to be
# excluded
# nd - Stopped adding \textheight 250cm in preamble because it seems to
# work only with included bitmaps. In other cases cannot get
# ghostview to process the whole (long) page before getting the ppm...
# 4-Nov-94 nd - Changed do_cmd_footnote, do_cmd_ditch_preceding and
# make_index_entry to use $ref_before instead of $before
# nd - Stopped putting $contents in the ALT attribute of IMGs
# becuase it causes problems when reading back cached images
# from images.pl
# nd - Changed ignore_numeric_arguments
# nd - Stopped making "section" the outermost level in do_cmd_appendix
# 3-Nov-94 po and nd - Added new option map=<image map URL> in the
# \htmlimage command which can turn an included ps image
# into an image map - UNTESTED
# nd - Added a signal handler to call cleanup if interrupted
# nd - Changed make_href to use %7E instead of &126; in URLs
# 2-Nov-94 nd - Changed special_env not to match the "_" char in equations
# pb - Changed replace_strange_accents to deal with \^\i (icirc)
# ab - Changed preamble to set textheight to 250cm to solve problem of
# long images
# ab - Removed \clearpage from the text for generated images which causes
# images to "move"
# nd - Changed pre_process to remove comments but not the % character
# which may be meaningful inside figure environments. It is removed
# text_cleanup
# 1-Nov-94 nd - Changed "finger" to use the -m option and added
# an extra test to make sure we are looking at the name of
# current user
# nd - Added support for \newline, \dots
# kl - Added support for tabbing environments - UNTESTED
# kl - Added new option -ps_images, "which
# if used together with -external_images produces PostScript external
# images rather than external GIF's.
# gg - Change to place the original latex content of an inlined image
# in the ALT property of IMG
# 31-Oct-94 nd - Fixed bugs in expand_code
# 28-Oct-94 nd - Changed so that the verbatim hash table does not use the
# DBM database becuase it crashes with entries longer than ~900
# characters. Now when forking a child, verbatim is saved and restored
# using files explicitly.
#
# 13-Oct-94 nd - Major overhaul of pre processing to reduce the amount of
# RAM required. Each of the \input files is pre processed a as
# separate child process which is forked off independently.
# The main latex2html process waits for each child to finish.
# Any global variables changed by each child process are
# seen by the parent process through DBM files. All the parent
# has to do is reopen the DBM files holding some hash tables
# (mainly LaTeX macros and verbatim environments).
# LaTeX2HTML now *REQUIRES* NDBM (New DataBase Management which
# can support multiple databases)
#
# Potential *problem*: "long" verbatim or rawhtml environments may
# dissapear depending on the limitations of the NDBM installation.
# On our system this happens at around 1000 characters. To avoid it
# split such environments into smaller chunks... The error message
# should look like
# dbm store returned -1, errno 28, key "15" at
# /usr/cblelca/nikos/bin/latex2html line 511, <INPUT> line 2199.
# nd - Changed the rx for getting the name of the user in sub address_data
# 12-Oct-94 nd - Changed slurp_input to use the unix "cat" command
# instead of doing it explicitly (naughty but faster and smaller)
# nd - Many changes to reduce the amount of memory required during
# slurping/bracket-matching/macro-substitution. Mainly these operations
# are now performed on separate chunks of the input stream. A chunk
# holds the contents of each file specified by an \input command.
# 11-Oct-94 nd - Changed do_cmd_section_helper and do_cmd_title to
# use extract_pure_text instead of text_cleanup to remove markup
# from headings
# 10-Oct-94 nd - sub normalize now replaces occurrences of '@' with 'tex'
# in command names
# nd - Changed ignore_numeric_argument to cover more cases
# nd - Added some more page layout control commands
# nd - Fixed minor bug in replace_next_char
# nd - Added \d (numbers) in delimiters list (DEJA VU!)
# 7-Oct-94 nd - Fixed citations so that optional argument appears at the end
# nd - Added LVerbatim in verbatim_rx for Raman (Naughty!)
# nd - Fixed problem which caused \verb to fail when it was followed by a
# a number
# sl - Fixed generation of illegal HTML when $TOP_NAVIGATION =0;
# nd - Extended the range of equations that need not be passed to latex
# to include alphanumeric characters (in sub special_env)
# 6-Oct-94 ab - Added support for multiple bibliographies
# 4-Oct-94 gg - More support fot LaTeX2e
# 30-Sep-94 nd - Added support for \LaTeX and \TeX! Removed them from the
# arguments of &process_commands_in_tex
# 27-Sep-94 nd - Changed add_link to put links from the navigation panel
# of the top node to the address specified by the variables
# $EXTERNAL_UP_LINK and $EXTERNAL_UP_TITLE
# nd - Removed spaces from definitions of some commands in html.sty
# rw - Fixed problem in wrap_math_environment where displayed
# equations ($$eqn$$) cause subsequent normal equations ($eqn$)
# to also appear as displayed
# rw - Added support for some LaTeX2e commands
# nd - Fixed the translation of the \cite command to recognize optional
# arguments
# nd - Changed address_data to try and match "Name:" when trying to
# figure out the username for $ADDRESS ("Name:" is used by tcsh)
# nd - Changed special_env to look for numbers as well as "\," in
# equations which dont need to be converted to images
# 23-Sep-94 nd - Fixed translation of displaymath (\[ \]) not to eat parts
# of the formula
# nd - Changed sub normalize not to eat the characters that follow an \&
# nd - Changed the manual not to use braces when \protect'ing commands
# nd - Added translation for \linebreak
# re - Added support for the \and command
# 22-Sep-94 nd - Changed make_head_and_body not to put <meta> tags in the HEAD
# nd - Changed the dot.latex2html-init file to use the new $ADDRESS format
# (this change was made in v0.6.4)
#--------- v0.6.4
# 30-Aug-94 nd - Changed install-test to check just for -t rather than
# for "-t index" in giftrans
# nd - Commented out the usage message in pstoppm3.ps
# bt - Various fixes dealing with counters and figure captions
# nd - Changed two occurrences of $file to $FILE in sub driver
#--------- v0.6.3
# 29-Aug-94 nd - Changed the protection on the *previous* set of iconic
# buttons in the distribution.
#--------- v0.6.2
# 26-Aug-94 nd - Changed so that .aux and .bbl files are really copied
# in the html directory as $$_images.{aux|bbl} so that references
# in images appear correctly
# - Changed so that environments given as arguments to
# process_commands_in_tex do not have their contents translated
# - Changed translate_environments so that counter commands
# which do not appear inside any environments are caught
# just before exit
# bt - Fixed problem in dealing with \part commands while processing
# auxiliary (.aux) files
# nd - Fixed regular expression in latex2html.config to include
# index|contents so that the ALT attribute in the navigation panel
# is correct
# nd - Added config. variable $FIGURE_SCALE_FACTOR and renamed
# $IMAGE_SCALE_FACTOR to $MATH_SCALE_FACTOR
# 25-Aug-94 nd - Changed the invisible character from  to   as
# described in http://www.uni-passau.de/~ramsch/iso8859-1.html
# nd - Now prints pointer to "Troubleshooting" if images fail to convert
# 24-Aug-94 nd - Fixed bug introduced by displaymath fix (23-Aug-94)
# ew - Fixed translate_environments to handle multi-section environments
# (environments spanning more than one sections) where the end of the
# environment is not important to latex2html
# 23-Aug-94 mk - Fixed so that the address appears inside the body
# (otherwise it generates illegal HTML)
# 23-Aug-94 nd - Fixed bug in the way that $$ (displaymath) are processed
# 18-Aug-94 nd - Fixed bug in replace_cross_references which caused
# pageref not to work
#--------- v0.6.1
# 17-Aug-94 kz - Added "/" in join statement of img_tag just in case
# someone omits it from the $ICONSERVER variable
# nd - Added pstoppm3.ps in distribution. This is necessary for gs 3.0
# or later. The install-test script has been modified to automatically
# change PSTOPPM in latex2html.config to point to the correct version
# after checking which version gs is available
# - Deleted a large portion of the man page inside latex2html
# - Changed texexpand to ignore spaces around names of included files
# - Changed $DVIPS to be invoked with the -M option which stops it
# using Metafont
# - Changed do_cmd_cite not to quote the #$cite_key because it
# was causing problems when removing citation markers
# - Changed do_cmd_texwritefile not to keep removing {}'s after picking
# the figure|section|table number. This fixes problems of disappearing
# numbers in figure and table captions
# - Fixed encode to remove id's from the image caching key so that
# image reuse works better
# - Fixed do_cmd_footnotemark to pick \footnotetext
# - Changed footnote file name from <FILE>.foot.html to footnode.html
# 16-Aug-94 nd - Fixed bug in process_commands_in_tex which caused
# commands with many arguments not to be processed correctly (eg
# parbox)
#--------- v0.6a3
# 16-Aug-94 nd - Changed install-test to test if giftrans takes the -t
# argument.
# - Changed $img_out to $img in make_transparent
# - Changed so it adds "<! DOCTYPE ..." and "<!-- Converted ..."
# information at the top of each node
# tm and nd - Changed $item_description_rx to deal with one level
# of nesting in \item[ [one level] ] commands. More than one levels
# will be processed correctly if enclosed in {}'s eg
# \item[{ [one [two]]}]
# nd - Changed the naming convention of generated HTML files. The top
# is as before but the rest are of the form "nodeN.html" where N is
# a number. This makes generated documents more portable.
# 15-Aug-94 nd - Changed meta_information not to use the contents
# of the "About this document..." section in the meta information
# tags. Instead only the section title is used
# nd - Changed the test on whether to read .aux from /figure|table/ to
# /\\caption/
# kz - Now ignores the numeric argument in (top|even|odd)sidemargin
# kz - Does not call giftrans unless $GIFTRANS is bound
# kz - Stopped adding ALT="" in embed_image. It is good to see [IMAGE]
# in lynx
#--------- v0.6a2
# 10-AUG-94 jhf - Fixed mispellings of pathnames in pstogif
#--------- v0.6a1
# 10-AUG-94 jhf - Fixed several logic bugs in install-test
# nd - Changed the code that loads ./.latex2html-init not to load
# the file if ./ = ~/
#---------- v0.6a
# 9-AUG-94 nd - Changed \html@next to \htmlnext in html.sty so the
# \makeatletter and \makeatother commands could be removed (they
# were cuasing other style files - changebar.sty - to crash)
# nd - Stopped using <TT> when converting "verbatim" - <PRE> is enough
# nd - Added support for loading a configuration file ./.latex2html-init
# after ~/.latex2html-init if one is found.
# 5-AUG-94 nd - The install-test script now makes executable the
# appropriate scripts
# 4-AUG-94 nd - Fixed problem with counters used in environments passed
# to LaTeX missing or being added too late in images.tex. Was done by
# scanning for $counters_rx in the $before string while processing
# environments
# bt - Fixed problem with section numbering (-show_section_numbers
# when sections have the same titles. Also added support for
# recognizing book parts
# nd - Removed all .xbm's from the icons directory
# nd - Created changebar.perl file which recognizes the commands
# \chgbarbegin and \chgbarend.
# These insert changebar icons around new text in a document.
# nd - Fixed strange name clash bug in process_command where
# $ref_contents was restored to an old value just before exiting
# - the change was to add a ref_ prefix to the local variable
# $before (the suberoutine was called with &process_command(???,*before)
#--------- v0.5.9
# 3-AUG-94 nd - Fixed major bug in processing nested environments which
# eg caused the outer environment to modify the contents of
# inner environments. Fix is to go into the recursive call on
# $contents before processing $contents in the current environment.
# Also found that recursive call to modify $after was superfluous...
# nd - Changed back to  - Mosaic don't like it.
#--------- v0.5.8
# 3-AUG-94 nd - Changed translate_commands and translate_environments to
# free more local variables before going into recursive calls.
# Also changed some of their subordinate subroutines to receive
# their parameters by reference rather than by value.
# nd - Changed  to
# 2-AUG-94 nd - Changed 3 reg expressions in revert_to_raw_tex to use
# the "o" option for efficiency. Changed reg expressions in
# wrap_shorthand_environments in the same way
# nd - Changed texexpand to check for "sty|tex|cls" when figuring out
# the basename of each style file
# nd - Changed calls to process_environment to modify variables in the
# caller rather than pass them around.
# nd - Modified $contents parameter to process_command to be passed by
# reference rather than by value
# nd - Changed several subroutines to "undef" their local arguments
# on exit. Not sure if this helps a lot...
# nd - Changed to stop processing \input and \include commands
# separately as soon as translation begins. This was
# causing problems with \input commands inside figure environments.
# Now they add themselves to $latex_body at the appropriate place.
# nd - Changed html.perl to use embed_image instead of deal_with_image
# nd - Stopped "linking" the .aux file in the HTML directory. It is not
# needed since the captions are processed separately (and the
# original was getting corrupted).
# 1-AUG-94 nd - Implemented a new command \htmlimage which takes one
# argument containing options used during the ps->gif converion.
# [scale=<scale factor>] [external] [thumbnail=<reduction factor>
# The "scale" option allows control over the size of the final image.
# The "external" option will cause the image not to be inlined
# (images are inlined by default). External images will be accessible
# from a hypertext link.
# The "thumbnail" option will cause a small inlined image to be
# placed in the caption. The size of the thumbnail depends on the
# reduction factor. "thumbnail" implies "external"...
# Example:
# \htmlimage{scale=1.5,external,thumbnail=0.2}
# will cause a small thumbnail image 1/5 of the original size to be
# placed in the final document, pointing to an external image 1.5
# times bigger than the original. (The "external" option is not
# necessary in this example.
# nd - Added a global variable $DEBUG. If set in the configuration
# files then intermediate files are left for later inspection.
# Caution: Intermediate files can be *enormous*.
# nd - Stopped eating \n's at the end of environments - it causes problem
# latex source of the form "$eqn$\nabc".
# nd - Changed it so that all GIFs are made transparent (ie the color
# white is transparent). This includes thumbnails. Warning:
# Some pictures may need to keep the white color!
#-------- v0.5.7
# 29-JUL-94 nd - Implemented a new version of the pstogif script in
# Perl. It takes -scale and -depth command line arguments. This will
# be used to scale equations etc. and convert color images without
# loss of quality.
# nd - Changed the image generation mechanism to use the new pstogif
# script. Equations are now on average *six* times smaller than before!
# (Calculated using a physics paper with 88 equations).
# nd - Changed the handling of "figure" and "equation" so that
# the captions appear in HTML rather than in the inlined image.
# This makes it unnecessary to scale up high quality images just to
# be able to read the captions. Also hypertext links inside the
# captions now work. Also, figure and table numbers will work
# correctly *if* there is an up to date .aux file (generated by
# LaTeX) *and* the caption does not contain any characters
# converted into images (eg equations).
# nd - Can now control the scaling of each image generated by an
# unknown environment using a new command \htmlimage (see 1-AUG).
# Also, a new global variable $IMAGE_SCALE_FACTOR controls
# the size of all other image generating commands and
# environments (eg the size of equations).
# nd - Fixed problem with \html@next in html.sty which caused latex to
# crash when reading html.sty with \input{html.sty}
# 27-JUL-94 nd - Removed link to itself inside the Contents page
# nd - Changed it so that it prints error messages
# if system calls go wrong
# nd - Texexpand now automatically excludes any files ending in
# .sty and .cls
# nd - Changed texexpand so that the arguments of documentclass
# and usepackage are processed correctly without being lost.
# Also modified do_include to return success or failure. If there
# is a failure then the corresponding style file is added back
# in the options lists.
# nd - Changed <B>'s to <STRONG> and <I>'s to <EM>'s. Now let's hope
# all the browsers know them!
# nd - Removed pstoxbm from distribution, removed -allbitmaps from
# options and $BIG_IMAGES_AS_GIFS from the config files
# 26-JUL-94 nd - Added support for do_cmd_latexonly.
# 26-JUL-94 nd - Option -split 0 now removes the (inactive) navigation panel
# nd - Changed some internal commands from latex2html_* and tex2html_* to
# latextohtml_* and textohtml_* so that numbers can act as delimiters
# to command names as expected (and added [0-9] to the delimiter list)
# *Removed* [0-9] from the delimiters list because it cannot distiguish
# between delimiters and legitimate commands/envs with numbers in their
# names
# hpr - Changed install-test to recognize dvipsk as dvips
# nd - Replaced nslookup and e-mail guessing code with simple finger
# nd - Fixed warnings in install-test about DVIPS compatibility
# nd - Fixed all HREFs to surround their arguments with ""'s
# kc - Replaced uses of $ENV{'PWD'} which is not maintained by
# all the shells with &getpwd (from getpwd.pl)
# gp - Replaced <HR> with <BR><HR> so that it looks better with lynx
# tw - Fixed substitute_meta_cmds not to write all macros in the same
# line in the file images.tex
# dh - Changed texexpand to understand "~" in TEXINPUTS
# bs - Fixed texexpand to ignore comments in inlcuded files
# nd - Fixed raw_arg_cmd_rx so it gets set after loading the .perl files
# nd - Changed $begin_env_rx to strip off spaces only until the end of
# of a line (needed for verbatim environments) - suggested by ???
# nd - Now adds the title of the document in the "About this document"
# section - this is useful for indexing eg with ALIWEB
# nd - Fixed \& to be translated as &
#----------- v0.5.6
# 25-JUL-94 jhf - Changed latex2html.config to provide textual equivalents
# (ALT) for the navigation buttons
# 25-JUL-94 nd - Fixed problem with unresolved references in inlined
# images by copying the .aux and .bbl files in the new HTML directory
# 22-JUL-94 nd - Put call to &address_data before the loading of
# ~/.latex2html-init so that @address_data is initialised when
# setting $ADDRESS
# 21-JUL-94 nd - Removed the line
# $_ = &process_command($sections_rx, $_) if /$sections_rx/;
# (4-AUG-94 Correction: The change involved $counters_rx NOT $sections_rx)
# which means that counter commands will *NOT* be effective inside
# environments passed to latex. This is to avoid executing too early
# counter commands occurring *inside* environments that are passed
# to latex. To avoid the problem introduced by this change must enclose
# it in an "ordered" environment which has no effect in latex but
# causes it's contents to be translated immediately by latex2html.
# (Fixed. See 4-AUG-94)
# 15-JUL-94 nd - Removed "~" from latex_specials_rx so that it is caught
# in %normalize and processed by a generated subroutine do_cmd_tilde
# 14-JUL-94 nd - Changed sub make_latex to add a global declaration that
# makes all text inside inlined images \large and \bf. This makes it
# unnecessary to use 110 110 ppmsetdensity in the psto{gif!xbm}
# converters which may distort included images. BUT have removed it
# because it is now possible to control the density explicitly (27/JUL)
# 14-JUL-94 nd - Simplified sub deal_with_texinputs so that it adds
# the current directories without overwriting the default TeX
# input directories by adding a trailing ':' - thanks bs.
# This means that there is *** no longer a need to specify full
# pathnames for included ps files ***.
# 11-JUL-94 nd - Replaced the \\s* with \\n* in the environment regular
# expression so that it eats just newlines rather than spaces.
# This fixes a problem with spaces following equations being eaten
# without causing extra lines to be introduced when we have consecutive
# environments.
# 5-JUL-94 nd - Fixed wrap_math_environment to treat $$ as displayed math.
# 4-JUL-94 nd - Previous fix (9-JUN) introduced new bug. It was replacing
# \_ with _ globally which affected environments passed to latex (tables).
# Changed process_command to stop doing this and embedded the
# identification of \<special_latex_char> in
# sub normalize instead of in process_command.
# 1-JUL-94 nd - Changed wrap_shorthand_environments to replace \[ and \]
# with \begin{displaymath} etc. Also changed right_justify to
# justify displaymath. (There is still a problem with justifying eqnarray*)
# 20-JUN-94 nd - Changed get_ref_mark to examine symbolic_labels as well and
# changed process_ref not to test $symbolic_labels{$label} before saving
# $use_label. This fixed problem with hyperref text being replaced with
# cross ref. icon.
# 9-JUN-94 nd - Fixed bug in process_command to replace \_ with _ before
# starting to process commands
# 21-MAY-94 mcb - Changed extract_image to remove stars ("*") from filenames
# 12-MAY-94 nd - Added sub meta_information in latex2html.config which is used
# to add meta information in the HEAD of generated documents. This
# information is compatible with that required by indexing scripts
# such as site-index.pl at http://www.ai.mit.edu/tools/site-index.html)
# which generate IAFA style templates for ALIWEB.
# By default the meta information includes the contents of the
# "About this document" section which can be customised with the
# -info command line option or the $INFO setup variable.
# 11-MAY-94 nd - Changed texexpand not to print "Checking ..." debug information. Changed do_cmd_title to ignore optional argument.
# 5-MAY-94 nd - Changed latex2html.config so that the invisible character 
# is used instead of the invisible bitmaps in anchors.
# 29-APR-94 nd - Changed process_ref and replace_[external]_cross_references to
# index the "hot" text text in \hyperref commands under $label as before
# but also under $id. This avoids the problem of each \hyperref
# writing over the "hot" text of the previous one...
# 28-APR-94 nd - Changed -ascii-mode to imply -external-images
# 22-APR-94 nd - Added \s* at the end of the regular expressions that match
# environments to eat trailing spaces.
# nd - Changed the normalised form of \/ from "slash" to "esc_slash"
# because it was clashing with \slash.
# 20-APR-94 nd - Added support for \i which just prints "i"
# (without the dot in latex).
# 20-APR-94 nd - Fixed erroneous call without an argument to escape_rx_chars from
# get_next_pair_or_char_pr. This was causing accented characters to appear
# twice.
# 15-APR-94 nd - Added a new command htmladdnormallinkfoot in html.sty and
# modified html.perl accordingly. This forces the URL to appear as a footnote
# in the paper version of a document instead of being ignored.
# *The default behavior of htmladdnormallink has changed*
# 6-APR-94 mb - Changed a pattern /^@/ to /^\@/ which caused perl on a DEC
# Alpha (OSF v1.3) to crash.
# 23-MAR-94 nd - Changed get_next to remove spaces and newlines
# from the beginning and and end of the arguments it picks up
# 17-MAR-94 nd - Changed do_cmd_footnotemark to remove optional arguments,
# and ALSO to look for optional arguments in the regular expression
# for footnotetext.
# 14-MAR-94 nd - Changed list helper to recognize optional arguments
# in \item commands
# 14-MAR-94 nd - Changed do_env_minipage to ignore its numeric argument
# 11-MAR-94 nd - Changed navigation_panel to insert newlines between buttons
# so that the HTML source looks prettier but removed them because they
# were being translated to <P>'s.
# 11-MAR-94 nd - Changed pre-process to chop of newlines at the start of verbatim
# environments - They generate 2 lines when combined with <TT>
# 11-MAR-94 nd - Fixed so \slash produces a "/" instead of being ignored
#----------- v0.5.5
# 28-FEB-94 nd - Changed get_next_pair_or_char_pr to escape command arguments
# picked from the text before using them in patterns
# 25-FEB-94 nd - Changed dot.latex2html-init to append styles to
# $DONT_INCLUDE instead of overwritting it. This caused looping problems
# when loading style files with commented \input commands (eg german.sty)
# 25-FEB-94 nd - Added translation for \hrule
#DELETED - Must escape new command|env names specifically...
# 20-FEB-94 nd - Changed sub tokenize to escape text for use in reg. expressions
# 17-FEB-94 nd - Fixed normalize to deal with commands of the form
# \<special_latex_char>text eg \_level.
# 16-FEB-94 nd - Changed the way perl executes latex2html (#!/usr/local/bin/perl)
# 11-FEB-94 nd - Mapped large, Large, LARGE etc to H5, H4, H3, etc.
# Pitfalls: They *must* be delimited and a carriage return in the HTML
# viewer is unavoidable.
#----------- v0.5.4
# 11-FEB-94 nd - Changed pre_process to include the substitution of
# special html characters and mark_string to solve the problem were
# the text inside the body of a newcommand was reverting to raw text.
# 28-JAN-94 nd - Added "]" to the list of delimiters (Oops!)
# 28-JAN-94 alo- Added flag -f when calling dvips in install-test (some
# dvips's dont return usage when called with no args)
# 28-JAN-94 nd - Removed "\\setlength{\\textheight}{10in}" because it was
# causing parameter overflow in some systems
# 28-JAN-94 nd - Strip leading +'s which appear in domain names returned by
# some NIS servers
# 27-JAN-94 nd - Modified texexpand to strip spaces out of $styles
#----------- v0.5.3
# 26-JAN-94 nd - The space eating \\s* in the rx for matching environments in
# sub make_begin_end_env_rx has been removed. It was making $$'s stick to
# the next piece of text. Because there is no regression testing to speak
# of, there may be problems (see 18-JAN-94).
# 26-JAN-94 nd - Changed pre-process not to eat the inital spaces
# in a verbatim environment
# 25-JAN-94 nd - Changed install-test to use $DVIPS instead of 'dvips'
#----------- v0.5.2
# 25-JAN-94 nd - Changed the markers for html special characters (&,<,>,etc)
# so that they are delimited by ;'s. This was required before updating
# styles/german.perl and styles/makeidx.perl
#----------- v0.5.1
# 24-JAN-94 nd - Changed mark_string to call pre_process. This
# allows the handling of verbatim environments which are given
# as arguments to command macros.
# nd - Changed pre_process to save the "unescaped" \verb delimiter
#----------- v0.5
# 21-JAN-94 nd - Fixed nasty problem in the generated code for commands
# that are passed to Latex. The regular expression for picking
# optional arguments has been replaced with get_next_optional_argument
#----------- v0.4.5
# 20-JAN-94 nd - Overhauled the way in which navigation icons are embedded
# in the main text. Instead of adding them at any time, icon markers
# are used instead. After cleaning the text of the navigation panel
# (text_cleanup) the real icons which may contain special characters
# such as ~ are exhcanged with the markers.
# nd - Hacked the mechanism for replacing html specials (<,>,& etc)
# to mark them rather than replace them outright. Otherwise
# occasionally the "&" in < etc is replaced (eg when <> are at the
# beginning of a line). Also, *changed slurp_input* to
# look for html special characters twice (otherwise there is a problem
# with consecutive html specials e.g.
# ' "<H...' strings where both " and < are special.
# Also modified html_special_rx and defined %html_special_inv to cope
# with the html specials markers.
# 20-JAN-94 wr - Added translations for (small|med|big)skip
# 19-JAN-94 aa - Made changes to retrieve correct host and domain information
# via a call to nslookup.
# aa - Added a search for latex2html-init to include the @INC
# directories.
# 18-JAN-94 nd - Implemented user-configurable navigation panel. The main
# script provides images of buttons bound to section links and global
# variables bound to section titles. The subroutine navigation_panel
# can be customized in order to create a personal navigation panel
# by mixing the buttons and titles provided. The number of words
# to display in each title can also be customized. The buttons were
# grabbed from real motif buttons.
# 18-JAN-94 nd - Navigation icon replacement (in main text) now also takes
# place after text_cleanup
# nd - Changed the environment regular expressions to match trailing
# spaces. This stops the insertion of paragraphs between consecutive
# environments.
#----------- v0.4.4
# 17-JAN-94 nd - Verbatim markers are now replaced after doing text_cleanup
#----------- v0.4.3
# 14-JAN-94 nd - Fixed bug introduced at 12-JAN when text_cleanup was moved
# earlier. Now text_cleanup is called separately to clean titles
#----------- v0.4.2
# 12-JAN-94 nd - Changed the way in which sectioning information is stored
# in order to fix problem with -split N and the way the "Next Page"
# link is calculated. Now there are two hash tables %section_info and
# %toc_section_info. The first one only holds sections which are split
# into separate files, while the second holds all the sections and is
# used in the calculation of the contents page.
# nd - Moved the final &text_cleanup before adding the navigation panel
# which may contain special latex characters such as "~"
# nd - Defined a translation for the "comment" environment defined in html.sty
#---------- v0.4.1
# 11-JAN-94 nd - Changed so that \stepcounter is included in the order_sensitive
# commands in order to generate new pictures for each one
# nd - Major change in order in which environments contents are processed
# *before* the rest of the input file (previously the $after variable was
# processed earlier, resulting in order sensitive images being incorrectly
# numbered).
# 11-JAN-94 up - Made the @ character normal before the preamble is added to
# the generated file images.tex and then made it special again.
# 10-JAN-94 nd - Added ';' to the list of delimiters. Added newfont in ignored commands
# Added do_env_minipage to ignore optional arg and return its contents
# Changed do_cmd_index to call make_index_entry
# 10-JAN-94 spqr - Added \n before closing } in generated \samepage lines
# 4-JAN-94 nd - Changed version number in latex2html.config from 0.3.1 to 0.4
# 21-DEC-93 nd - Fixed serious bug in parsing \item{XX} commands in list_helper
# nd - Changed the format of the generated filenames from section*.X.Y.html to
section*_X_Y.html so that VMS systems can accept them
# 20-DEC-93 nd - Fixed pre_process to escape special chars picked from the text
#---------- v0.4
# nd - Changed documentation to warn about dvips
# nd - Fixed typo in french.perl
# 9-DEC-93 nd - Fixed problem with comments in verbatim environments in texexpand
#---------- v0.4a
# nd - Added option -init_file
# nd - Fixed bug in replace_cross_references when processing pagerefs
# 8-DEC-93 nd - Modified translate_environments not to process environments
# inside a latexonly environment
# 7-DEC-93 nd - Modified texexpand to ignore comments!
# Also modified so that \input and \include do not have to be in the
# beginning of a line. Text before or after such commands is preserved.
# nd - Changed the option -nonavigation to -no_navigation
# nd - Moved to code for handling html.sty in styles/html.perl and
# added the code for \hyperref in it
# 2-DEC-93 nd - Fixed bug in determining the outermost level
# 1-DEC-93 nd - Put ab's code on handling makeidx.sty commands in styles/makeidx.perl
# 1-DEC-93 nd - Texexpand now copies the whole input file in the $DESTDIR
# directory. This is necessary beacuse it needs to see the whole thing
# in order to extract the style files used. Doing it using pipes was limiting
# it to the size of the pipe buffer (thanks to rjw)
# 30-NOV-93 nd - Moved the removal of comments after the extraction of
# verbatim environments
# nd - If $ENV{$TEXINPUTS} is defined then the directory with the source
# latex file is pushed into it. If it is undefined then symbolic links
# are created in the HTML directory pointing to each .sty file in
# source directory. This is to allow style files to be found when running
# latex in the HTML directory
# 26-NOV-93 nd - Many changes to translate latex accents and special characters to
# the equivalent ISO-LATIN-1 characters where possible.
# The following are still NOT supported.
# \=, \u, \v, \H, \t, \d, and \b
# fz+nd Added a filter to replace accent commands defined in different
# style files such as german.sty or french.sty.
# 24-NOV-93 nd - Created the file styles/german.perl which contains
# the sub german_translation which replaces accents defined in
# german.sty with ISO-LATIN-1 equivalents. Also created styles/french.perl
# nd - When expanding commands and new definitions will now pick the next
# n characters for each of the n arguments if they are not delimited
# by braces. Must generalize this when picking $next_pair_rx for any command
# nd - Fixed very serious problem with $next_pair_rx $next_pair_pr_rx
# (made them match only the beginning of a line ...) and created
# $any_next_pair_rx and $any_next_pair_pr_rx which will skip initial chars
# nd - Moved the Change Log in a separate file called "Changes"
# 23-NOV-93 nd - Changed texexpand to take an extra command line
# argument -save_styles <file> which instructs it to save in <file> the names
# of any style files or other included files. <file> is then examined,
# and for each <file> it tries to load perl code in ./<file>.perl or
# $LATEX2HTMLSTYLES/<file>.perl that can deal with <file>[.sty].
# nd - The value of $LATEX2HTMLDIR is now bound to the environment variable
# of the same name. This is used by texexpand when loading perl code
# that corresponds to particular style files.
# nd - Changed texexpand to look for <file> as well as <file>.tex
# Stopped assigning source directory to TEXINPUTS. This was
# causing problems when TEXINPUTS did not already have the correct paths
# (style files not found when passing commands etc. to latex).
# fz - Modified texexpand to look in subdirectories when expanding
# nd - Now gives warning if file.tex is newer than file.aux|bbl|etc
# 22-NOV-93 nd - Changed $HIDE_SECTION_NUMBERS to $SHOW_SECTION_NUMBERS
# 18-NOV-93 nd - Changed $_ in process_ext_file to global to produce side-effect
# (was causing bibliographies to disappear)
# 17-NOV-93 nd - Now every section title is enclosed in a name anchor (based on
# $curr_sec_id). This fixes the problem of the table of contents in single
# page documents created with -split 0
# 17-NOV-93 nd - New options -auto_navigation (suggested by tl),
# -index_in_navigation, -contents_in_navigation, -next_page_in_navigation
# -previous_page_in_navigation
# 16-NOV-93 nd - Created new icons for next_page, previous_page, index and contents
# 16-NOV-93 nd - Created a $LATEX2HTMLDIR/install-test file which sets the
# $LATEX2HTMLDIR variable in the main script and tests the availability of
# external programs. To install, must change latex2html.config and (run
# install-test or change $LATEX2HTMLDIR in this file manually)
# 16-NOV-93 nd - Created a $LATEX2HTMLDIR/latex2html.config file which is
# loaded before each user's personal init files
# 15-NOV-93 nd - Fixed problem with \item not being delimited
#--------- v0.3.12
# 12-NOV-93 nd - Can now specify that numeric arguments should be ignored e.g.
# \parindent 12pt (using parindent # &ignore_numeric_argument)
# 12-NOV-93 nd - Added '=' in the list of $delimiters
# 11-NOV-93 nd - Changed post_process to include the header
#--------- v0.3.11
# 11-NOV-93 nd - Changed the way globbing is done. Some had problems with <$$*>
# 11-NOV-93 nd - Changed the image reuse mechanism yet again. Have removed
# the id from the hash table key and I stopped saving order sensitive
# environments like equations, captioned figures and tables etc.
#--------- v0.3.10
# 10-NOV-93 nd - Added blank.pbm to the distribution.
# 10-NOV-93 nd - Added sub right_justify which prepends a tiled blank XBM
# to an equation or eqnarray XBM to give the effect of right justification.
# It uses the global variable $LINE_WIDTH and the pbmplus routines
# xbmtopbm (to convert to pbm), pnmfile (to ask for its dimensions),
# pnmtile (to replicate a blank PBM of 1 pixel), pnmcat
# (to prepend the replicated blank bitmap) and pbmtoxbm
# (to convert the result to XBM).
# 10-NOV-93 nd - Option -top_navigation to put navigation panel at the top
# 10-NOV-93 nd - Changed pstogif and pstoxbm not to use 100 100 ppmsetdensity
# when calling $GS. This makes included ps files which contain bitmaps cleaner
#--------- v0.3.9
# 9-NOV-93 nd - Option -bottom_navigation to put navigation panel at the end
# 9-NOV-93 nd - Now prints version number etc. on invocation
# 9-NOV-93 nd - Fixed problem with blank lines surrounding rawhtml environments
# 9-NOV-93 nd - Fixed conversion of \$ \& \% etc. by rearranging $delimiters
# 9-NOV-93 nd - Fixed problem with handling "hand-made" bibliographies. Also
# fixed serious problem with picking optional arguments in sub do_cmd_bibitem
#--------- v0.3.8
# 29-OCT-93 nd - Added some support for optional labels (user defined bullets) in
# itemize and enumerate environments. Problem is that user defined bullets
# should NOT be mixed with default ones (e.g. in an enumerate environment the
# automatic numbering is lost if any such labels are used).
#--------- v0.3.7
# 28-OCT-93 nd - Now remove markers *after* adding child node titles.
# These titles may contain inlined images.
# 28-OCT-93 nd - Now call translate_environments when processing section titles
# 28-OCT-93 nd - Changed the way that section titles are encoded (encode_title)
# so that titles can be recognized in <file>.aux. Also commands not recognized
# in an aux file are not recorded. This solves the problem of titles with
# font changes not getting the correct numbers. *** This process relies on each
# section title being unique ***.
# 27-OCT-93 nd - Added ' to $delimiters and to $cmd_delims
# 26-OCT-93 nd - Modified sub process_ref to take optional argument which controls
# the printed cross ref mark (0 -> default, 1 -> internal label, 'XXX' -> 'XXX')
#--------- v0.3.6
# 25-OCT-93 nd - Now ignores the \/ command
# 25-OCT-93 nd - Added support for a latexonly and an htmlonly environment.
# 25-OCT-93 nd - No navigation panel on the top page.
# 21-OCT-93 nd - Added support for the \begin|end{rawhtml} environment. Can type
# raw HTML (intended to be used to specify forms). Latex ignores it.
# 21-OCT-93 ec - Now gives warning when it is not possible to convert an image
# 19-OCT-93 nd - Fixed spelling error in name of subroutine do_cmd_htmladdimg
# 18-OCT-93 nd - Added \clearpage inside each page passed to latex in order
# to synchronize the positions of floating figure and table environments.
# 18-OCT-93 nd - Added the environment id as part of encoded key in the table
# of generated images. This means that the same tex code will generate two
# separate images. This is ok for environments like equations which will have
# unique equation numbers but it is an overkill for things like $X_i$.
# It also means that the addition of a new envirnoment will change the unique
# id's and images will not be reused.
#--------- v0.3.5
# 14-OCT-93 nd - Added option to print the section numbers calculated by LaTex
# which is true by default. When true the references to sections are shown
# using these numbers instead of $cross_ref_visible_mark
# 14-OCT-93 nd - Fixed Problem with \label commands inside captions
# 13-OCT-93 nd - Theorems are now passed on to latex in order to keep their
# counters in step with other counters.
# Stopped removing \caption commands from figure and table environments.
# Generalised the mechanism for reading in the $FILE.bbl and can use it to read
# any other $FILE.<ext>. At the moment it is used to read the $FILE.aux which
# contains the correct symbolic values for the labels. Defined new
# do_cmd_<aux_cmd> subroutines to handle the contents of $FILE.aux.
# 12-OCT-93 nd - Changed the way *-forms of sectioning commands are recognized
# and processed (they must not update the sectioning counters)
# 11-OCT-93 nd - Fixed problem with encoding of keys in cached image table.
# 8-OCT-93 nd - Major reengineering to get numeric labels in cross-references,
# to figures, equations and tables. Now latex is called
# only once to process all the counter commands, special commands and
# unknown environments. Dvips is also called once to generate a separate
# file for each image. The resulting .aux file contains the correct
# numeric labels for equations, figures and tables.
# The subroutines dump_counters, increment_counters, reset_counters_within,
# get_full_counter, get_counter, set_within_counter have been deleted.
# Have stopped trying to translate counter commands. Instead they are appended
# to the variable $latex_body which contains unknown commands and environments
# that will be possed to latex.
# POTENTIAL PROBLEMS:
# - ALL explicit counter manipulation commands are appended to
# $latex_body as each section is processed and they are not
# evaluated in the expected order (e.g. it may cause a problem when
# interleaving explicit equation counter setting commands with
# equation environments)
# - When an environment generates more than one pages of postscript then
# ALL THE IMAGES GET OUT OF SYNC. In this case a warning is given.
#--------- v0.3.4
# 5-OCT-93 nd - Fixed bug in dump_counters that stopped equation counters being
# dumped before passing environments to Latex
#---------- v0.3.3
# 30-SEP-93 nd - Changed $delimiters and $single_cmd_rx to handle commands which
# are also delimiters
# 30-SEP-93 jr - Added '-' to delimiters
# 30-SEP-93 nd - Fixed serious problem with ignored commands and environments.
# Moved ignored commands into hash table %ignore and changed &ignore_commands,
# &process_environment, &process_command to use it.
#---------- v0.3.2 (also known as 0.3.1 patch 1)
# 29-SEP-93 nd - Stopped using the list @process_in_latex_cmds and the
# associated procedure make_process_in_latex_cmds
# 29-SEP-93 nd - \\ now translates to <BR> instead of <P>
# 29-SEP-93 nd - Added '!' to the set of delimiters.
# 29-SEP-93 nd - Changed $raw_arg_cmd_rx to check for delimiters and changed
# wrap_raw_arg_cmds to use it.
# 29-SEP-93 nd - Changed value of ALIGN attribute from TOP to BOTTOM.
# 16-SEP-93 nd - Fixed bug in do_include-lines (input|include commands now
# revert to raw tex before added to the preamble
# 13-SEP-93 nd - Added :,~, in the list of delimiters
# 7-SEP-93 nd - Added option -reuse and corresponding variable $REUSE
# 2-SEP-93 nd - Added $tmp in local variables of get_next (was causing test on
# whether an env was defined or not in get_body_newcommand to fail.
#---------- v0.3.1
# 1-SEP-93 rst - Added set of patches to deal with nested environments which have
# the same name. This was necessary in order to address the problem of commands
# that should be processed in latex whose arguments contain environments.
# Such arguments should be left raw. The solution is to enclose such commands
# in tex2thml_wrap wrappers.
# 1-SEP-93 rst - Added patch to fix the recognition of \specials
# 1-SEP-93 nd - Fixed bug in get_first_words - now counts words instead of chars
#---------- v0.3
# 26-AUG-93 nd - Added test for not adding new counter definitions in the preamble
# if already there. Also added test to catch counters with name "0" in
# dump_counters (need more looking into why this happens)
# 26-AUG-93 nd - Added test to check if file already exists when generating a
# name for a new image. If positive, the pid is used to "uniquify" it.
# 26-AUG-93 nd - Incorporated latest set of patches from rst: (i) expand macros in
# bibliographies, (ii) recognize $a$$b$ as two distinct invocations of
# non-display math mode and (iii) a new version of texexpand
# 26-AUG-93 nd - Added ALT="" attribute to the IMG tag to make Lynx users happier
# 25-AUG-93 nd - Fixed serious bug in the test for undefined environments
# (have replaced sub undefined_env with defined_env)
# 25-AUG-93 nd - Added mechanism for reusing existing images generated by
# the translator during previous runs. The associations between text already
# passed to latex and any generated images is saved in the file "images.pl".
# On invoking latex2html the user is asked whether old images should be reused
# as well as being asked whether to delete the old directory.
# 25-AUG-93 nd - Added delimiters (<>) around all the marker strings
# (e.g. $verbatim_mark, $toc_mark etc). This stops them being concatenated
# to commands which they may follow (tests/verbatim.tex)
# 24-AUG-93 nd - Added html.sty in the distribution
# 24-AUG-93 nd - Added support for referring to symbolic labels defined in
# one document from any other document. The external links to another document
# will point to the correct physical files even after the original document
# has been broken into different physical parts or moved [1]. This is
# possible even when the document being referenced lives on a remote server.
# To do this two new commands have been defined:
# \externallabels{<URL to directory of external document>}
# {<remote document LABELS.PL file>}
# \externalref{<label in remote document>}
# The command \externallabels can be used to import external labels
# into the current document.
# The command \externalref can be used to refer to labels in external
# documents, in the same way that the \ref command refers to internal labels.
# The file LABELS.PL associates symbolic labels with physical files and is now
# generated automatically for each translated document. (Idea came from
# discussions with rjw. See tests/external-labels.tex.
# [1] (to get re-alignment it is necessary to run latex2html on the
# original document and any others that refer to it).
# 23-AUG-93 nd - Added support for new latex command latextohtml which can
# be used to pass arbitrary perl code to the translator
# 23-AUG-93 nd - Added some support for operations on counters. Very ugly code
# and it is still not right. The order that commands are processed depends
# on their depth. This causes problems with counter commands which must
# be processed in strict order. Also as commands are processed after
# environments, counter commands cannot influence environments.
# See tests/counters.tex
# 23-AUG-93 nd - Added support for correct numbering of equations
# 23-AUG-93 nd - Fixed problem with the numbering of theorem environments
# 23-AUG-93 nd - Fixed regular expression in make_name that chewed up section
# names containing "10"
# 20-AUG-93 nd - Changed the name of PPMTOXBM to PBMTOXBM
# 20-AUG-93 nd - The names of commands like \LaTeX and \pounds stays in the text
# as [LaTeX] etc. when the ascii_mode is used
# 20-AUG-93 nd - Fixed bug that caused links to figures and tables to disappear
# when the -nolatex option was used
# 20-AUG-93 nd - Added option -ascii_mode to switch all the icons to their
# ascii equivalents so that the output can be used on character based browsers
# 19-AUG-93 nd - Added the pstogif script in the distribution
# 19-AUG-93 nd - Added option -external_images that does not inline images but
# provides links to where they are stored
# 19-AUG-93 rst - Fixed bug in get_body_def
# 19-AUG-93 rst - Modified to work with new version of texexpand. Added an
# option -dont_include to specify style files that should not be included.
# 19-AUG-93 rst - Added a new version of texexpand to the distribution.
# This handles the inclusion of style files which need to processed by the
# translator (patch7).
# 19-AUG-93 rst - Added option to change the format of the generated images
# for figures, tables and tabular environments to GIF rather than XBM.
# This saves a lot of disk space as GIFs are more compact. Smaller
# images for equations and special symbols are still XMBs as they look
# better on color backround screens (patch6)
# 19-AUG-93 rst - Fixed bugs in the handling of optional labels on
# bibitems (patch5)
# 19-AUG-93 rst - Added support for nested math mode expressions and general
# list environments (patch4 - document from Hell!)
# 19-AUG-93 rst - This patch educates latex2html about simple raw TeX command
# \special and simple instances of \def (where "simple" is defined roughly
# as "they could have used \newcommand, but didn't". For the messier cases,
# the definition is scooped up and moved to the preamble. This allows
# latex2html to handle the simple, but nonstandard, postscript figure inclusion
# macros as well as an awful lot of other stuff done with gratuitous
# \defs (patch3)
# 19-AUG-93 rst - Fixed bug in the substitution of macro definitions (patch2)
# 19-AUG-93 rst - Cleaned up erroneously generated output from unrecognized
# commands in the preamble (patch1)
# 19-AUG-93 nd - Changed do_cmd_title and do_cmd_section_helper to remove newlines
# from the title and section names when they are used for navigation
# 19-AUG-93 nd - Individual footnotes in the footnotes file are separated by
# about a page of empty space for easier identification (suggested by dm)
# 18-AUG-93 nd - Fixed problem about the -nonavigation option deleting the header
# information (including the title).
# 18-AUG-93 nd - Now writes out the tag <HEAD> instead of <HEADER> (oops!)
# 18-AUG-93 nd - Added command \thanks
# 16-AUG-93 nd - Changed the $process_in_latex_cmd_rx to $raw_args_cmd_rx to
# include sectioning commands. This was done to catch the titles of
# sections before they are processed in order to remove label references
# (not from the title in the text but from the title that is used as a
# handle for the section in the table of contents etc).
# 10-AUG-93 nd - Removed the space character at the beginning of $verbatim_mark
# and $verb_mark (was causing problems with \verb at the begining of a doc)
# 5-AUG-93 nd - Changed $CHILDLINE to use ____ instead of ----- 's
#---------- v0.2
# 3-AUG-93 nd - Stopped trying to expand the paths to the arguments of psfig
# as it done through $TEXINPUT
# 3-AUG-93 nd - All the navigation icon variables are now set in the
# initialization file
# 2-AUG-93 nd - The initialization file is now require'd using the full path
# 2-AUG-93 nd - Modified the pstoxbm script to use environment variables
# set in the .latex2html-init file. Modified the dot.latex2html-init file
# 2-AUG-93 nd - Added delimiters(;) after the translation of special HTML chars
# Modified the way HTML specials are translated in slurp_input
# 2-AUG-93 nd - Added flag to switch off navigation links (suggested by wb)
# 2-AUG-93 nd - References filtered through translate_environment
# (bug reported by bh)
# 2-AUG-93 nd - Fixed problem with recognizing the *-forms of environments
# (bug reported by rst)
# 2-AUG-93 nd - Added code to handle the $$-form of display math
# (bug reported by rst)
# 2-AUG-93 nd - Prints message at the end if references are not found
# 2-AUG-93 nd - Added a separator between the body of text in a page and the
# child links controlled by $CHILDLINE (suggested by ac)
# 2-AUG-93 nd - Can specify the syntax of commands to be ignored in the
# initialisation file
# 31-JUL-93 nd - Added hundreds of semicolons to make it compatible with older
# versions of Perl (but failed !)
# 30-JUL-93 nd - Changed the order of the navigation keywords to be the same
# as that of the navigation icons (suggested by ac)
# 30-JUL-93 nd - Changed verbatim command arguments to be translated to fixed
# width fonts (<TT>)
# 30-JUL-93 nd - Added section 'Hyperlinks with LaTeX commands' to the man page
#---------- v0.1.1
# 29-JUL-93 nd - Changed make_new_env_rx and make_begin_env_rx to consume extra
# spaces and newlines after a \begin{<env>} command. Such newlines
# were being added to environments that cause errors if they contain
# blank lines (e.g. math)
# 29-JUL-93 nd - Fixed design flaw (reported by ab)
# Problem: Arguments of commands that were passed to latex were translated.
# Fixed it by registering such commands in regular expression
# $process_in_latex_cmd_rx and then processing such commands as soon as we enter
# translate_commands. Modified translate_commands and process_command to
# this accomodate. Also fixed bugs in the code of do_cmd_<X> where
# X=psfig|fbox|framebox|parbox
# 29-JUL-93 nd - Changed the format of inlined images coming back from latex
# from GIF to XBM (suggested by ab)
# 26-JUL-93 nd - Created
distrib
>
Mandriva
>
2010.1
>
x86_64
>
media
>
main-release
>
by-pkgid
>
00a5a0816e7ec376b5f378443503a49d
>
files
>
354
