#!/bin/bash # # /etc/rc.d/rc.sysinit - run once at boot time # # Taken in part from Miquel van Smoorenburg's bcheckrc. # HOSTNAME=$(/bin/hostname) . /etc/init.d/functions set -m if [ -f /etc/sysconfig/network ]; then . /etc/sysconfig/network fi # Read in config data. if [ -f /etc/sysconfig/system ]; then . /etc/sysconfig/system fi if [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; then HOSTNAME=localhost fi if [ ! -e /proc/mounts ]; then mount -n -t proc /proc /proc mount -n -t sysfs /sys /sys >/dev/null 2>&1 fi PLYMOUTH= [ -x /bin/plymouth ] && PLYMOUTH=yes # Only read this once. cmdline=$(cat /proc/cmdline) for t in $cmdline; do case $t in -s|single|S|s) REQUESTED_RUNLEVEL="S" ;; [1-9]) REQUESTED_RUNLEVEL="$t" ;; esac done [ -z "$REQUESTED_RUNLEVEL" ] && REQUESTED_RUNLEVEL=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab) [ -z "$REQUESTED_RUNLEVEL" ] && REQUESTED_RUNLEVEL="3" # killing splash when using single-user mode if [ "$REQUESTED_RUNLEVEL" == "S" ]; then [ -n "$PLYMOUTH" ] && /bin/plymouth quit 2>/dev/null fi uname_r=`uname -r` # Read in config data. if [ -f /etc/sysconfig/speedboot ]; then . /etc/sysconfig/speedboot fi if strstr "$cmdline" speedboot= ; then for arg in $cmdline ; do if [ "${arg##speedboot=}" != "${arg}" ]; then SPEEDBOOT=${arg##speedboot=} fi done fi if [ "$REQUESTED_RUNLEVEL" != 5 -o -f /etc/rc.d/rc5.d/S*network-auth -o -f /etc/crypttab ]; then SPEEDBOOT=no fi # disable speedboot if more than one profile is found (and not selected in cmdline) if echo /etc/netprofile/profiles/* | grep -q ' ' ; then if ! strstr "$cmdline" PROFILE= ; then SPEEDBOOT=no fi fi if strstr "$cmdline" failsafe ; then SPEEDBOOT=no fi if [ "$SPEEDBOOT" = "probe" ]; then SPEEDBOOT_PROBE=yes fi if [ "x$SPEEDBOOT" = "xauto" ]; then STATUS=`grep -m 1 "$uname_r" /var/lib/speedboot/status 2>/dev/null` case "$STATUS" in *first\ time*) SPEEDBOOT=yes ;; *FAILED*) SPEEDBOOT=no ;; *OK*) SPEEDBOOT=yes ;; *STANDARD\ BOOT*) SPEEDBOOT=yes ;; *) SPEEDBOOT=no ;; esac fi if [ "$SPEEDBOOT" = "yes" ]; then export SPEEDBOOT PROMPT=no else unset SPEEDBOOT fi if [ "x$SPEEDBOOT" != "xyes" ]; then if [ ! -d /proc/bus/usb ]; then modprobe usbcore >/dev/null 2>&1 && mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb else mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb fi fi #SPEEDBOOT if [ -f /.readahead_collect -a -r /etc/sysconfig/readahead ]; then . /etc/sysconfig/readahead if [ "x$READAHEAD_COLLECT" == "xyes" -a ! -f /forcefsck -a -x /sbin/readahead-collector ]; then /sbin/readahead-collector fi elif [ -x /sbin/readahead_early ]; then /sbin/readahead_early > /dev/null 2>&1 fi if [ -x /etc/rc.early.local ]; then . /etc/rc.early.local fi # Unmount the initrd, if necessary # (pixel) do not unmount if /initrd/loopfs is mounted (happens for root loopback) # (bluca) handle udev /dev tmpfs here since kernel will happily umount /dev after initrd end # (blino) do it before the udev service is started so that it uses the /dev tmpfs from initrd if LC_ALL=C grep -q /initrd /proc/mounts && ! LC_ALL=C grep -q /initrd/loopfs /proc/mounts ; then if LC_ALL=C grep -q /initrd/dev /proc/mounts; then mount --move /initrd/dev /dev fi action "Unmounting initrd: " umount -l /initrd /sbin/blockdev --flushbufs /dev/ram0 >/dev/null 2>&1 fi if [ "x$SPEEDBOOT" = "xyes" ]; then /sbin/start_udev udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x0c03*" udevadm trigger --action=add --subsystem-match=block udevadm settle & UDEV_DISK_PID=$! udevadm trigger --action=add --subsystem-match=mem --subsystem-match=input --subsystem-match=tty --subsystem-match=acpi --subsystem-match=rtc --subsystem-match=hid udevadm trigger --action=add --subsystem-match=pci --attr-match=class="0x060000*" udevadm settle & UDEV_PID=$! fi # Check SELinux status SELINUX_STATE= if [ -e "/selinux/enforce" ] && [ "$(cat /proc/self/attr/current)" != "kernel" ]; then if [ -r "/selinux/enforce" ] ; then SELINUX_STATE=$(cat "/selinux/enforce") else # assume enforcing if you can't read it SELINUX_STATE=1 fi fi if [ -n "$SELINUX_STATE" -a -x /sbin/restorecon ] && __fgrep " /dev " /proc/mounts >/dev/null 2>&1 ; then /sbin/restorecon -R /dev 2>/dev/null fi disable_selinux() { gprintf "*** Warning -- SELinux is active\n" gprintf "*** Disabling security enforcement for system recovery.\n" gprintf "*** Run 'setenforce 1' to reenable.\n" echo "0" > "/selinux/enforce" } relabel_selinux() { # if /sbin/init is not labeled correctly this process is running in the # wrong context, so a reboot will be required after relabel REBOOTFLAG=$(restorecon -v /sbin/init) AUTORELABEL= . /etc/selinux/config if [ "$AUTORELABEL" = "0" ]; then rm -f /.autorelabel [ -n "$PLYMOUTH" ] && plymouth --hide-splash echo gprintf "*** Warning -- SELinux %s policy relabel is required.\n" ${SELINUXTYPE} gprintf "*** /etc/selinux/config indicates you want to manually fix labeling\n" gprintf "*** problems. Dropping you to a shell; the system will reboot\n" gprintf "*** when you leave the shell.\n" echo "0" > /selinux/enforce sulogin gprintf "Unmounting file systems\n" umount -a mount -n -o remount,ro / gprintf "Automatic reboot in progress.\n" reboot -f else [ -n "$PLYMOUTH" ] && plymouth --hide-splash echo gprintf "*** Warning -- SELinux %s policy relabel is required.\n" ${SELINUXTYPE} gprintf "*** Relabeling could take a very long time, depending on file\n" gprintf "*** system size and speed of hard drives.\n" echo "0" > /selinux/enforce /sbin/fixfiles -F restore > /dev/null 2>&1 rm -f /.autorelabel if [ ! -z "$REBOOTFLAG" ]; then gprintf "Automatic reboot in progress.\n" reboot -f fi echo $SELINUX_STATE > /selinux/enforce [ -n "$PLYMOUTH" ] && plymouth --show-splash fi } key_is_random() { [ "$1" = "/dev/urandom" -o "$1" = "/dev/hw_random" \ -o "$1" = "/dev/random" ] } find_crypto_mount_point() { local fs_spec fs_file fs_vfstype remaining_fields local fs while read fs_spec fs_file remaining_fields; do if [ "$fs_spec" = "/dev/mapper/$1" ]; then echo $fs_file break; fi done < /etc/fstab } # Because of a chicken/egg problem, init_crypto must be run twice. /var may be # encrypted but /var/lib/random-seed is needed to initialize swap. init_crypto() { local have_random dst src key opt mode owner params makeswap skip arg opt local param value rc ret mke2fs mdir prompt mount_point ret=0 have_random=$1 while read dst src key opt; do [ -z "$dst" -o "${dst#\#}" != "$dst" ] && continue [ -b "/dev/mapper/$dst" ] && continue; if [ "$have_random" = 0 ] && key_is_random "$key"; then continue fi if [ -n "$key" -a "x$key" != "xnone" ]; then if test -e "$key" ; then owner=$(ls -l $key | (read a b owner rest; echo $owner)) if ! key_is_random "$key"; then mode=$(ls -l "$key" | cut -c 5-10) if [ "$mode" != "------" ]; then gprintf "INSECURE MODE FOR %s\n" $key fi fi if [ "$owner" != root ]; then gprintf "INSECURE OWNER FOR %s\n" $key fi else gprintf "Key file for %s not found, skipping\n" $dst ret=1 continue fi else key="" fi params="" makeswap="" mke2fs="" skip="" # Parse the src field for UUID= and convert to real device names if [ "${src%%=*}" == "UUID" ]; then src=$(/sbin/blkid -t "$src" -l -o device) elif [ "${src/^\/dev\/disk\/by-uuid\/}" != "$src" ]; then src=$(__readlink $src) fi # Is it a block device? [ -b "$src" ] || continue # Is it already a device mapper slave? (this is gross) devesc=${src##/dev/} devesc=${devesc//\//!} for d in /sys/block/dm-*/slaves ; do [ -e $d/$devesc ] && continue 2 done # Parse the options field, convert to cryptsetup parameters and # contruct the command line while [ -n "$opt" ]; do arg=${opt%%,*} opt=${opt##$arg} opt=${opt##,} param=${arg%%=*} value=${arg##$param=} case "$param" in cipher) params="$params -c $value" if [ -z "$value" ]; then gprintf "%s: no value for cipher option, skipping\n" $dst skip="yes" fi ;; size) params="$params -s $value" if [ -z "$value" ]; then gprintf "%s: no value for size option, skipping\n" $dst skip="yes" fi ;; hash) params="$params -h $value" if [ -z "$value" ]; then gprintf "%s: no value for hash option, skipping\n" $dst skip="yes" fi ;; verify) params="$params -y" ;; swap) makeswap=yes ;; tmp) mke2fs=yes esac done if [ "$skip" = "yes" ]; then ret=1 continue fi if [ -z "$makeswap" ] && cryptsetup isLuks "$src" 2>/dev/null ; then if key_is_random "$key"; then gprintf "%s: LUKS requires non-random key, skipping\n" $dst ret=1 continue fi if [ -n "$params" ]; then echo "$dst: options are invalid for LUKS partitions," \ "ignoring them" fi if [ -n "$key" ]; then /sbin/cryptsetup -d $key luksOpen "$src" "$dst" <&1 2>/dev/null && success || failure rc=$? else mount_point="$(find_crypto_mount_point $dst)" [ -n "$mount_point" ] || mount_point=${src##*/} prompt=$(printf "%s is password protected" "$mount_point") if [ -n "$PLYMOUTH" -a -d /usr/share/plymouth ]; then plymouth ask-for-password --prompt "$prompt" --command="/sbin/cryptsetup luksOpen -T1 $src $dst" <&1 rc=$? else # stop splash to ask for password rc_splash verbose /sbin/cryptsetup luksOpen "$src" "$dst" <&1 && success || failure rc=$? fi rc=$? fi else [ -z "$key" ] && plymouth --hide-splash /sbin/cryptsetup $params ${key:+-d $key} create "$dst" "$src" <&1 2>/dev/null && success || failure rc=$? [ -z "$key" ] && plymouth --show-splash fi if [ $rc -ne 0 ]; then ret=1 continue fi if [ -b "/dev/mapper/$dst" ]; then if [ "$makeswap" = "yes" ]; then mkswap "/dev/mapper/$dst" 2>/dev/null >/dev/null fi if [ "$mke2fs" = "yes" ]; then if mke2fs "/dev/mapper/$dst" 2>/dev/null >/dev/null \ && mdir=$(mktemp -d /tmp/mountXXXXXX); then mount "/dev/mapper/$dst" "$mdir" && chmod 1777 "$mdir" umount "$mdir" rmdir "$mdir" fi fi fi done < /etc/crypttab return $ret } # Print a text banner. # C-like escape sequences don't work as 2nd and up parameters of gprintf, # so real escap chars were written PRODUCT=`sed "s/.*release \([0-9.]*\).*/\1/g" /etc/mandriva-release 2> /dev/null` SYSTEM=${SYSTEM="Mandriva Linux"} if [ -r /etc/sysconfig/oem ]; then . /etc/sysconfig/oem fi if [ "$BOOTUP" != "serial" ]; then gprintf "\t\t\tWelcome to %s" "`echo -en '\\033[1;36m'`$SYSTEM`echo -en '\\033[0;39m'` $PRODUCT" else gprintf "\t\t\tWelcome to %s" "$SYSTEM $PRODUCT" fi echo -en "\r" echo if [ "$PROMPT" != "no" ]; then gprintf "\t\tPress 'I' to enter interactive startup." echo fi # Fix console loglevel if [ -n "$LOGLEVEL" ]; then /bin/dmesg -n $LOGLEVEL fi initsplash 5 rc_splash start 1 # Initialize hardware if [ -f /proc/sys/kernel/modprobe ]; then if strstr "$cmdline" nomodules || [ ! -f /proc/modules ] ; then # We used to set this to NULL, but that causes 'failed to exec' messages" sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1 fi fi touch /dev/.in_sysinit >/dev/null 2>&1 # Set default affinity if [ -x /bin/taskset ]; then if strstr "$cmdline" default_affinity= ; then for arg in $cmdline ; do if [ "${arg##default_affinity=}" != "${arg}" ]; then /bin/taskset -p ${arg##default_affinity=} 1 fi done fi fi nashpid=$(pidof nash 2>/dev/null) [ -n "$nashpid" ] && kill $nashpid >/dev/null 2>&1 unset nashpid if [ "x$SPEEDBOOT" != "xyes" ]; then /sbin/start_udev fi #SPEEDBOOT # Load other user-defined modules for file in /etc/sysconfig/modules/*.modules ; do [ -x $file ] && $file done # Load modules (for backward compatibility with VARs) if [ -f /etc/rc.modules ]; then if [ "x$SPEEDBOOT" != "xyes" ]; then /etc/rc.modules else ionice -c 3 /etc/rc.modules & MODULES_PID=$! fi fi mount -n -t devpts -o mode=620 none /dev/pts >/dev/null 2>&1 [ -n "$SELINUX_STATE" ] && restorecon /dev/pts >/dev/null 2>&1 mount -n -t tmpfs none /dev/shm >/dev/null 2>&1 # Configure kernel parameters update_boot_stage RCkernelparam sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1 if [ "x$SPEEDBOOT" != "xyes" ]; then # If brltty exist start it (after udev so that vcsa device nodes are created) [ -x /bin/brltty -a "$BRLTTY" != "no" ] && action "Starting braille terminal" /bin/brltty && SPEEDBOOT="DISABLED reason: braille" fi #SPEEDBOOT # Set the hostname. update_boot_stage RChostname action "Setting hostname %s: " ${HOSTNAME} hostname ${HOSTNAME} # Set the NIS domain name if [ -n "$NISDOMAIN" ]; then action "Setting NIS domain name %s: " $NISDOMAIN nisdomainname $NISDOMAIN fi if [ "x$SPEEDBOOT" != "xyes" ]; then # Now that we load only one scsi_hostadapter in the initrd, we # need to load the others here modprobe scsi_hostadapter >/dev/null 2>&1 # Now that we use modular IDE, we need to do the same for IDE controllers modprobe ide-controller >/dev/null 2>&1 # Sync waiting for storage. { rmmod scsi_wait_scan ; modprobe scsi_wait_scan ; rmmod scsi_wait_scan ; } >/dev/null 2>&1 # Start any MD RAID arrays that haven't been started yet if [ -f /etc/mdadm.conf -a -x /sbin/mdadm ]; then MDADM_RETURN=`/sbin/mdadm -As --auto=yes --run 2>&1` RETVAL=$? if [ $RETVAL -gt 0 ]; then echo $MDADM_RETURN | grep -q 'No arrays found in config file' RETVAL=$? # only enable speedboot if no array is configured if [ $RETVAL -gt 0 ]; then SPEEDBOOT="DISABLED: reason:MD RAID" fi else # MD RAID arrays detected, better to disable speedboot SPEEDBOOT="DISABLED: reason:MD RAID" fi fi fi #SPEEDBOOT # Device mapper & related initialization if ! __fgrep "device-mapper" /proc/devices >/dev/null 2>&1 ; then modprobe dm-mod >/dev/null 2>&1 fi if [ "x$SPEEDBOOT" != "xyes" ]; then if [ -f /etc/crypttab ]; then init_crypto 0 fi if ! strstr "$cmdline" nompath && [ -f /etc/multipath.conf -a \ -x /sbin/multipath ]; then modprobe dm-multipath > /dev/null 2>&1 /sbin/multipath -v 0 if [ -x /sbin/kpartx ]; then /sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p" >/dev/null fi fi if ! strstr "$cmdline" nodmraid && [ -x /sbin/dmraid ]; then modprobe dm-mirror >/dev/null 2>&1 dmraidsets=$(LC_ALL=C /sbin/dmraid -s -c -i) if [ "$dmraidsets" != "no raid disks" -a "$dmraidsets" != "no block devices found" ]; then for dmname in $dmraidsets; do if [[ "$dmname" =~ '^isw_.*' ]] && \ ! strstr "$cmdline" noiswmd; then continue fi /sbin/dmraid -ay -i --rm_partitions -p "$dmname" >/dev/null 2>&1 /sbin/kpartx -a -p p "/dev/mapper/$dmname" SPEEDBOOT="DISABLED reason:dmraid" done fi fi fi #SPEEDBOOT if [ -x /sbin/lvm ]; then action "Setting up Logical Volume Management:" /sbin/lvm vgchange -a y --ignorelockingfailure fi if [ "x$SPEEDBOOT" != "xyes" ]; then if [ -f /etc/crypttab ]; then init_crypto 0 fi fi #SPEEDBOOT if [ -f /fastboot ] || strstr "$cmdline" fastboot ; then fastboot=yes fi if [ -f /fsckoptions ]; then fsckoptions=$(cat /fsckoptions) fi # (blino) always source autofsck settings, for AUTOFSCK_CRYPTO_TIMEOUT (#16029) [ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck if [ -f /forcefsck ] || strstr "$cmdline" forcefsck ; then fsckoptions="-f $fsckoptions" elif [ -f /.autofsck ]; then if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then AUTOFSCK_OPT="$AUTOFSCK_OPT -f" fi if [ -n "$AUTOFSCK_SINGLEUSER" ]; then [ -n "$PLYMOUTH" ] && plymouth --hide-splash rc_splash verbose echo gprintf "*** Warning -- the system did not shut down cleanly. \n" gprintf "*** Dropping you to a shell; the system will continue\n" gprintf "*** when you leave the shell.\n" [ -n "$SELINUX_STATE" ] && echo "0" > /selinux/enforce sulogin [ -n "$SELINUX_STATE" ] && echo "1" > /selinux/enforce [ -n "$PLYMOUTH" ] && plymouth --show-splash fi fsckoptions="$AUTOFSCK_OPT $fsckoptions" fi if [ "$BOOTUP" = "color" ]; then fsckoptions="-C $fsckoptions" else fsckoptions="-V $fsckoptions" fi READONLY= if [ -f /etc/sysconfig/readonly-root ]; then . /etc/sysconfig/readonly-root fi if strstr "$cmdline" readonlyroot ; then READONLY=yes [ -z "$RW_MOUNT" ] && RW_MOUNT=/var/lib/stateless/writable [ -z "$STATE_MOUNT" ] && STATE_MOUNT=/var/lib/stateless/state fi if strstr "$cmdline" noreadonlyroot ; then READONLY=no fi if [ "$READONLY" = "yes" -o "$TEMPORARY_STATE" = "yes" ]; then mount_empty() { if [ -e "$1" ]; then echo "$1" | cpio -p -vd "$RW_MOUNT" &>/dev/null mount -n --bind "$RW_MOUNT$1" "$1" fi } mount_dirs() { if [ -e "$1" ]; then mkdir -p "$RW_MOUNT$1" find "$1" -type d -print0 | cpio -p -0vd "$RW_MOUNT" &>/dev/null mount -n --bind "$RW_MOUNT$1" "$1" fi } mount_files() { if [ -e "$1" ]; then cp -a --parents "$1" "$RW_MOUNT" mount -n --bind "$RW_MOUNT$1" "$1" fi } # Common mount options for scratch space regardless of # type of backing store mountopts= # Scan partitions for local scratch storage rw_mount_dev=$(blkid -t LABEL="$RW_LABEL" -l -o device) # First try to mount scratch storage from /etc/fstab, then any # partition with the proper label. If either succeeds, be sure # to wipe the scratch storage clean. If both fail, then mount # scratch storage via tmpfs. if mount $mountopts "$RW_MOUNT" > /dev/null 2>&1 ; then rm -rf "$RW_MOUNT" > /dev/null 2>&1 elif [ x$rw_mount_dev != x ] && mount $rw_mount_dev $mountopts "$RW_MOUNT" > /dev/null 2>&1; then rm -rf "$RW_MOUNT" > /dev/null 2>&1 else mount -n -t tmpfs $RW_OPTIONS $mountopts none "$RW_MOUNT" fi for file in /etc/rwtab /etc/rwtab.d/* /dev/.initramfs/rwtab ; do is_ignored_file "$file" && continue [ -f $file ] && cat $file | while read type path ; do case "$type" in empty) mount_empty $path ;; files) mount_files $path ;; dirs) mount_dirs $path ;; *) ;; esac [ -n "$SELINUX_STATE" -a -e "$path" ] && restorecon -R "$path" done done # Use any state passed by initramfs [ -d /dev/.initramfs/state ] && cp -a /dev/.initramfs/state/* $RW_MOUNT # In theory there should be no more than one network interface active # this early in the boot process -- the one we're booting from. # Use the network address to set the hostname of the client. This # must be done even if we have local storage. ipaddr= if [ "$HOSTNAME" = "localhost" -o "$HOSTNAME" = "localhost.localdomain" ]; then ipaddr=$(ip addr show to 0.0.0.0/0 scope global | awk '/[[:space:]]inet / { print gensub("/.*","","g",$2) }') for ip in $ipaddr ; do HOSTNAME= eval $(ipcalc -h $ipaddr 2>/dev/null) [ -n "$HOSTNAME" ] && { hostname ${HOSTNAME} ; break; } done fi # Clients with read-only root filesystems may be provided with a # place where they can place minimal amounts of persistent # state. SSH keys or puppet certificates for example. # # Ideally we'll use puppet to manage the state directory and to # create the bind mounts. However, until that's all ready this # is sufficient to build a working system. # First try to mount persistent data from /etc/fstab, then any # partition with the proper label, then fallback to NFS state_mount_dev=$(blkid -t LABEL="$STATE_LABEL" -l -o device) if mount $mountopts $STATE_OPTIONS "$STATE_MOUNT" > /dev/null 2>&1 ; then /bin/true elif [ x$state_mount_dev != x ] && mount $state_mount_dev $mountopts "$STATE_MOUNT" > /dev/null 2>&1; then /bin/true elif [ ! -z "$CLIENTSTATE" ]; then # No local storage was found. Make a final attempt to find # state on an NFS server. mount -t nfs $CLIENTSTATE/$HOSTNAME $STATE_MOUNT -o rw,nolock fi if [ -w "$STATE_MOUNT" ]; then mount_state() { if [ -e "$1" ]; then [ ! -e "$STATE_MOUNT$1" ] && cp -a --parents "$1" "$STATE_MOUNT" mount -n --bind "$STATE_MOUNT$1" "$1" fi } for file in /etc/statetab /etc/statetab.d/* ; do is_ignored_file "$file" && continue [ ! -f "$file" ] && continue if [ -f "$STATE_MOUNT/$file" ] ; then mount -n --bind "$STATE_MOUNT/$file" "$file" fi for path in $(grep -v "^#" "$file" 2>/dev/null); do mount_state "$path" [ -n "$SELINUX_STATE" -a -e "$path" ] && restorecon -R "$path" done done if [ -f "$STATE_MOUNT/files" ] ; then for path in $(grep -v "^#" "$STATE_MOUNT/files" 2>/dev/null); do mount_state "$path" [ -n "$SELINUX_STATE" -a -e "$path" ] && restorecon -R "$path" done fi fi fi if ! [[ " $fsckoptions" =~ " -y" ]]; then fsckoptions="-a $fsckoptions" fi _RUN_QUOTACHECK=0 if [ -f /forcequotacheck ] || strstr "$cmdline" forcequotacheck ; then _RUN_QUOTACHECK=1 fi Fsck() { fsck $* rc=$? if [ "$rc" -eq "0" ]; then echo_success echo elif [ "$rc" -eq "1" ]; then echo_passed echo _RUN_QUOTACHECK=1 elif [ "$rc" -eq "2" -o "$rc" -eq "3" ]; then gprintf "Unmounting file systems\n" umount -a mount -n -o remount,ro / gprintf "Automatic reboot in progress.\n" reboot -f elif [ $((rc & 4)) = 4 ]; then # Return code is a or between return codes for the filesystems # 4 means that a filesystem remains corrupted rc_splash verbose echo_failure echo echo gprintf "*** An error occurred during the file system check.\n" gprintf "*** Dropping you to a shell; the system will reboot\n" gprintf "*** when you leave the shell.\n" str=`gprintf "(Repair filesystem)"` PS1="$str \# # "; export PS1 [ "$SELINUX_STATE" = "1" ] && disable_selinux sulogin gprintf "Unmounting file systems\n" umount -a mount -n -o remount,ro / gprintf "Automatic reboot in progress.\n" reboot -f else echo_failure echo gprintf "*** A non fatal error occurred during the file system check.\n" fi } remount_needed() { local state oldifs [ "$READONLY" = "yes" ] && return 1 state=$(LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts) oldifs=$IFS IFS="," for opt in $state ; do if [ "$opt" = "rw" ]; then IFS=$oldifs return 1 fi done IFS=$oldifs return 0 } if [ "x$SPEEDBOOT" = "xyes" ]; then wait $UDEV_DISK_PID fi # do not check / if already rw (for example with unionfs) if [ -z "$fastboot" -a "$READONLY" != "yes" ] && remount_needed; then gprintf "Checking root filesystem\n" Fsck -T -a $fsckoptions / fi _RUN_QUOTACHECK=0 # Remount the root filesystem read-write. update_boot_stage RCmountfs if remount_needed ; then action "Remounting root filesystem in read-write mode: " mount -n -o remount,rw / fi # wait for usb storage scanning processes to finish if ! strstr "$cmdline" nousb; then LC_ALL=C grep '08' /sys/bus/usb/devices/*/bInterfaceClass >/dev/null 2>&1 RETVAL=$? if [ $RETVAL -eq 0 ]; then countdown=20 until [ -d /sys/module/usb_storage -o $countdown -eq 0 ]; do usleep 100000; let countdown=$countdown-1; done while ps -eocomm | grep -q usb-stor-scan; do sleep 1; done fi fi if [ "x$SPEEDBOOT" != "xyes" ]; then # Clean up SELinux labels if [ -n "$SELINUX_STATE" ]; then restorecon /etc/mtab /etc/ld.so.cache /etc/blkid/blkid.tab /etc/resolv.conf >/dev/null 2>&1 SPEEDBOOT="DISABLED reason: SELinux" fi [ -x /sbin/hibernate-cleanup.sh ] && /sbin/hibernate-cleanup.sh start # If relabeling, relabel mount points. if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then if [ -f /.autorelabel ] || strstr "$cmdline" autorelabel ; then restorecon $(awk '!/^#/ && $4 !~ /noauto/ && $2 ~ /^\// { print $2 }' /etc/fstab) >/dev/null 2>&1 fi fi fi if [ "$READONLY" != "yes" ] ; then # Clear mtab (> /etc/mtab) &> /dev/null # Remove stale backups rm -f /etc/mtab~ /etc/mtab~~ # Enter mounted filesystems into /etc/mtab mount -f / mount -f /proc >/dev/null 2>&1 mount -f /sys >/dev/null 2>&1 mount -f /dev/pts >/dev/null 2>&1 mount -f /proc/bus/usb >/dev/null 2>&1 fi # (pixel) also added /initrd/loopfs for loopback root mount -f /initrd/loopfs 2>/dev/null if [ -x /sbin/isapnp -a -f /etc/isapnp.conf -a ! -f /proc/isapnp ]; then # check for arguments passed from kernel if ! strstr "$cmdline" nopnp ; then PNP=yes fi if [ -n "$PNP" ]; then action "Setting up ISA PNP devices: " /sbin/isapnp /etc/isapnp.conf else action "Skipping ISA PNP configuration at users request: " /bin/true fi fi # tweak isapnp settings if needed. if [ -n "$PNP" -a -f /proc/isapnp -a -x /sbin/sndconfig ]; then /sbin/sndconfig --mungepnp >/dev/null 2>&1 fi # Check filesystems # (pixel) do not check loopback files, will be done later (aren't available yet) if [ -z "$fastboot" ]; then gprintf "Checking filesystems\n" Fsck -T -R -A -a -t noopts=loop $fsckoptions fi # Mount all other filesystems (except for network bases filesystems and /proc, which is already # mounted). Contrary to standard usage, # filesystems are NOT unmounted in single user mode. # (pixel) also do not mount loopback and encrypted filesystems # will be done later ( # export locales (needed by mount.ntfs-3g) export LC_ALL export LANG if [ "$READONLY" != "yes" ] ; then action "Mounting local filesystems: " mount -a -t nodevpts,nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev,noloop,noencrypted else action "Mounting local filesystems: " mount -a -n -t nodevpts,nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_netdev,noloop,noencrypted fi ) if [ "x$SPEEDBOOT" != "xyes" ]; then [[ -z $AUTOFSCK_CRYPTO_TIMEOUT ]] && AUTOFSCK_CRYPTO_TIMEOUT=15 #Mounting Encrypted filesystem encrypted_swap= if [[ ! -f /fastboot ]];then encrypted= while read -a entry;do device=${entry[0]} mountpoint=${entry[1]} options=${entry[3]} type=${entry[2]} if [[ $options == *encryption=* || $options == *encrypted* ]];then [[ $options == *noauto* ]] && continue if [[ $type == *swap* ]];then encrypted_swap="$encrypted_swap $device" continue fi encrypted="$encrypted $mountpoint" fi done < /etc/fstab if [[ -n $encrypted ]];then modprobe cryptoloop rc_splash verbose echo "We have discovered Encrypted filesystems, do you want to mount them now ?" MSG=`gprintf "Press Y within %%d seconds to mount your encrypted filesystems..."` KEYS=`gprintf "yY"` if /sbin/getkey -c $AUTOFSCK_CRYPTO_TIMEOUT -m "$MSG" "$KEYS"; then echo -e '\n' for i in ${encrypted};do echo -n "${i} "; mount ${i} done else echo -e '\n' fi fi fi # (pixel) Check loopback filesystems if [ ! -f /fastboot ]; then modprobe loop gprintf "Checking loopback filesystems" Fsck -T -R -A -a -t opts=loop $fsckoptions fi fi #SPEEDBOOT # Mount loopback action "Mounting loopback filesystems: " mount -a -O loop # Update quotas if necessary if [ X"$_RUN_QUOTACHECK" = X1 -a -x /sbin/quotacheck ]; then action "Checking local filesystem quotas: " /sbin/quotacheck -anug fi if [ -x /sbin/quotaon ]; then action "Turning on user and group quotas for local filesystems: " /sbin/quotaon -aug fi if [ "x$SPEEDBOOT" != "xyes" ]; then # Check to see if a full relabel is needed if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then if [ -f /.autorelabel ] || strstr "$cmdline" autorelabel ; then relabel_selinux fi else if [ -d /etc/selinux -a "$READONLY" != "yes" ]; then [ -f /.autorelabel ] || touch /.autorelabel fi fi fi #SPEEDBOOT # Initialize pseudo-random number generator if [ -f "/var/lib/random-seed" ]; then cat /var/lib/random-seed > /dev/urandom else [ "$READONLY" != "yes" ] && touch /var/lib/random-seed fi if [ "$READONLY" != "yes" ]; then chmod 600 /var/lib/random-seed dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null fi if [ "x$SPEEDBOOT" != "xyes" ]; then if [ -f /etc/crypttab ]; then init_crypto 1 SPEEDBOOT="DISABLED reason: crypto FS" fi # Configure machine if necessary. if [ -f /.unconfigured ]; then if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then /usr/bin/rhgb-client --quit fi if [ -x /usr/bin/system-config-keyboard ]; then /usr/bin/system-config-keyboard fi if [ -x /usr/bin/passwd ]; then /usr/bin/passwd root fi if [ -x /usr/sbin/system-config-network-tui ]; then /usr/sbin/system-config-network-tui fi if [ -x /usr/sbin/timeconfig ]; then /usr/sbin/timeconfig fi if [ -x /usr/sbin/authconfig-tui ]; then /usr/sbin/authconfig-tui --nostart fi if [ -x /usr/sbin/ntsysv ]; then /usr/sbin/ntsysv --level 35 fi # Reread in network configuration data. if [ -f /etc/sysconfig/network ]; then . /etc/sysconfig/network # Reset the hostname. action "Resetting hostname %s: " ${HOSTNAME} hostname ${HOSTNAME} # Reset the NIS domain name. if [ -n "$NISDOMAIN" ]; then action "Resetting NIS domain name %s: " $NISDOMAIN nisdomainname $NISDOMAIN fi fi rm -f /.unconfigured fi fi # Clean out /. rm -f /fastboot /fsckoptions /forcefsck /.autofsck /forcequotacheck /halt \ /poweroff /.suspended /etc/killpower &> /dev/null # Do we need (w|u)tmpx files? We don't set them up, but the sysadmin might... _NEED_XFILES= [ -f /var/run/utmpx -o -f /var/log/wtmpx ] && _NEED_XFILES=1 # Clean up /var. rm -rf /var/lock/cvs/* /var/run/screen/* find /var/lock /var/run ! -type d ! -path '/var/lock/TMP_1ST' -exec rm -f {} \; if [ "x$SPEEDBOOT" = "xyes" ]; then wait $MODULES_PID wait $UDEV_PID /etc/rc.d/rc S & RC_PID=$! fi { # Clean up utmp/wtmp > /var/run/utmp touch /var/log/wtmp chgrp utmp /var/run/utmp /var/log/wtmp chmod 0664 /var/run/utmp /var/log/wtmp if [ -n "$_NEED_XFILES" ]; then > /var/run/utmpx touch /var/log/wtmpx chgrp utmp /var/run/utmpx /var/log/wtmpx chmod 0664 /var/run/utmpx /var/log/wtmpx fi [ -n "$SELINUX_STATE" ] && restorecon /var/run/utmp* /var/log/wtmp* >/dev/null 2>&1 # Clean up various /tmp bits [ -n "$SELINUX_STATE" ] && restorecon /tmp rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.s.PGSQL.* rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \ /tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \ /tmp/ssh-* /tmp/.fam_socket /tmp/.esd /tmp/.esd-* \ /tmp/pulse-* /tmp/.sawfish-* /tmp/esrv* /tmp/kio* \ /var/lib/gdm/core.* # Make ICE directory mkdir -m 1777 -p /tmp/.ICE-unix >/dev/null 2>&1 chown root:root /tmp/.ICE-unix [ -n "$SELINUX_STATE" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1 # Start up swapping. update_boot_stage RCswap action "Enabling /etc/fstab swaps: " swapon -a -e 2>/dev/null if [ "$AUTOSWAP" = "yes" ]; then curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do get_numeric_dev dec $x ; echo -n " "; done) swappartitions=$(blkid -t TYPE=swap -o device) if [ x"$swappartitions" != x ]; then for partition in $swappartitions ; do [ ! -e $partition ] && continue majmin=$(get_numeric_dev dec $partition) gprintf "Enabling local swap partitions: \n" swapon $partition done fi fi # Set up binfmt_misc /bin/mount -t binfmt_misc none /proc/sys/fs/binfmt_misc > /dev/null 2>&1 # Boot time profiles. Yes, this should be somewhere else. if [ -x /usr/sbin/system-config-network-cmd ]; then if strstr "$cmdline" netprofile= ; then for arg in $cmdline ; do if [ "${arg##netprofile=}" != "${arg}" ]; then /usr/sbin/system-config-network-cmd --profile ${arg##netprofile=} fi done fi fi ( # Now turn on swap in case we swap to files. action "Enabling swap space: " swapon -a -e if [ "x$SPEEDBOOT" != "xyes" ]; then # If a SCSI tape has been detected, load the st module unconditionally # since many SCSI tapes don't deal well with st being loaded and unloaded if [ -n "$USEMODULES" -a -f /proc/scsi/scsi ] && LC_ALL=C grep -q 'Type: Sequential-Access' /proc/scsi/scsi 2>/dev/null ; then LC_ALL=C fgrep -q ' 9 st' /proc/devices || modprobe st >/dev/null 2>&1 SPEEDBOOT="DISABLED reason: SCSI tape" fi fi #SPEEDBOOT ( # Turn on harddisk optimization # There is only one file /etc/sysconfig/harddisks for all disks # after installing the hdparm-RPM. If you need different hdparm parameters # for each of your disks, copy /etc/sysconfig/harddisks to # /etc/sysconfig/harddiskhda (hdb, hdc...) and modify it. # Each disk which has no special parameters will use the defaults. # Each non-disk which has no special parameters will be ignored. # disk[0]=s; disk[1]=hda; disk[2]=hdb; disk[3]=hdc; disk[4]=hdd; disk[5]=hde; disk[6]=hdf; disk[7]=hdg; disk[8]=hdh; disk[9]=hdi; disk[10]=hdj; disk[11]=hdk; disk[12]=hdl; disk[13]=hdm; disk[14]=hdn; disk[15]=hdo; disk[16]=hdp; disk[17]=hdq; disk[18]=hdr; disk[19]=hds; disk[20]=hdt; disk[21]=sda; disk[22]=sdb; disk[23]=sdc; disk[24]=sdd; disk[25]=sde; disk[26]=sdf; disk[27]=sdg; disk[28]=sdh; disk[29]=sr0; disk[30]=sr1; disk[31]=sr2; disk[32]=sr3; disk[33]=scd0; disk[34]=scd1; disk[35]=scd2; disk[36]=scd3; disk[37]=sg0; disk[38]=sg1; disk[39]=sg2; disk[40]=sg3; # Skip hard disks optimization if software RAID arrays are currently # resyncing and disks heavily active, because hdparm might hang and # lock system startup in such situation if [ ! -f /proc/mdstat ] || ! /bin/egrep -qi "re(cover|sync)|syncing" /proc/mdstat; then if [ -x /sbin/hdparm ]; then for device in {0..40}; do unset MULTIPLE_IO USE_DMA EIDE_32BIT LOOKAHEAD EXTRA_PARAMS if [ -f /etc/sysconfig/harddisk${disk[$device]} ]; then . /etc/sysconfig/harddisk${disk[$device]} HDFLAGS[$device]= if [ -n "$MULTIPLE_IO" ]; then HDFLAGS[$device]="-q -m$MULTIPLE_IO" fi if [ -n "$USE_DMA" ]; then HDFLAGS[$device]="${HDFLAGS[$device]} -q -d$USE_DMA" fi if [ -n "$EIDE_32BIT" ]; then HDFLAGS[$device]="${HDFLAGS[$device]} -q -c$EIDE_32BIT" fi if [ -n "$LOOKAHEAD" ]; then HDFLAGS[$device]="${HDFLAGS[$device]} -q -A$LOOKAHEAD" fi if [ -n "$EXTRA_PARAMS" ]; then HDFLAGS[$device]="${HDFLAGS[$device]} $EXTRA_PARAMS" fi else HDFLAGS[$device]="${HDFLAGS[0]}" fi if [ -e "/proc/ide/${disk[$device]}/media" -o -e "/sys/block/${disk[$device]}/device/vendor" ]; then if [ -e "/proc/ide/${disk[$device]}/media" ]; then hdmedia=`cat /proc/ide/${disk[$device]}/media` else hdmedia=`cat /sys/block/${disk[$device]}/device/vendor` fi if [ "$hdmedia" = "disk" -o "$vendor" = "ATA" -o -f "/etc/sysconfig/harddisk${disk[$device]}" ]; then if [ -n "${HDFLAGS[$device]}" ]; then sleep 2 action "Setting hard drive parameters for %s: " ${disk[$device]} /sbin/hdparm ${HDFLAGS[$device]} /dev/${disk[$device]} fi fi fi done fi else action "RAID Arrays are resyncing. Skipping hard drive parameters section." /bin/true fi ) & # Adjust symlinks as necessary in /boot to keep system services from # spewing messages about mismatched System maps and so on. if [ -L /boot/System.map -a -r /boot/System.map-$uname_r -a \ ! /boot/System.map -ef /boot/System.map-$uname_r ] ; then ln -s -f System.map-$uname_r /boot/System.map 2>/dev/null fi if [ ! -e /boot/System.map -a -r /boot/System.map-$uname_r ] ; then ln -s -f System.map-$uname_r /boot/System.map 2>/dev/null fi # Adjust symlinks as necessary in /boot to have the default config if [ -L /boot/config -a -r /boot/config-$uname_r ] ; then ln -sf config-$uname_r /boot/config 2>/dev/null fi if [ ! -e /boot/config -a -r /boot/config-$uname_r ] ; then ln -sf config-$uname_r /boot/config 2>/dev/null fi # Now that we have all of our basic modules loaded and the kernel going, # let's dump the syslog ring somewhere so we can find it later [ -f /var/log/dmesg ] && mv -f /var/log/dmesg /var/log/dmesg.old dmesg -s 131072 > /var/log/dmesg ) & # create the crash indicator flag to warn on crashes, offer fsck with timeout touch /.autofsck &> /dev/null if [ "$PROMPT" != no ]; then while :; do pid=$(/sbin/pidof getkey) [ -n "$pid" -o -e /var/run/getkey_done ] && break usleep 100000 done [ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1 fi } & if strstr "$cmdline" confirm ; then touch /var/run/confirm fi if [ "x$SPEEDBOOT" != "xyes" ]; then if [ "$PROMPT" != "no" ]; then /sbin/getkey i && touch /var/run/confirm touch /var/run/getkey_done fi wait [ "$PROMPT" != no ] && rm -f /var/run/getkey_done fi if strstr "$cmdline" failsafe; then touch /var/run/failsafe fi if [ -f /var/lock/TMP_1ST ];then if [ -f /etc/init.d/mandrake_firstime ];then /bin/sh /etc/init.d/mandrake_firstime fi fi if [ "x$SPEEDBOOT" = "xyes" ]; then if [ ! -f /.readahead_collect -a -x /sbin/readahead_later ]; then /sbin/readahead_later > /dev/null 2>&1 fi wait $RC_PID countdown=10 until [ -e /tmp/.X11-unix/X0 -o $countdown -eq 0 ]; do sleep 1; let countdown=$countdown-1; done /sbin/udevadm trigger --action=add --subsystem-nomatch=tty --subsystem-nomatch=block --subsystem-nomatch=mem --subsystem-nomatch=input --subsystem-nomatch=acpi --subsystem-nomatch=rtc --subsystem-nomatch=hid /sbin/udevadm settle --timeout=5 > /dev/null 2>&1 /sbin/udevadm control --env=STARTUP= mount -n -t usbfs -o devmode=0664,devgid=43 /proc/bus/usb /proc/bus/usb fi if [ -f /etc/init.d/mandrake_everytime ]; then /bin/sh /etc/init.d/mandrake_everytime fi if [ "x$SPEEDBOOT_PROBE" = "xyes" ]; then sed -i -e "/$uname_r .*/d" /var/lib/speedboot/status 2>/dev/null unset SPEEDBOOT_PROBE fi if [ "x$SPEEDBOOT" = "xyes" -a ! -e /tmp/.X11-unix/X0 ]; then /etc/init.d/dm stop grep -q "$uname_r" /var/lib/speedboot/status 2> /dev/null RETVAL=$? if [ $RETVAL -eq 0 ]; then sed -i -e "s/^$uname_r FAILED (first time)/$uname_r FAILED/g" -e "/FAILED/!s/^$uname_r .*/$uname_r FAILED (first time)/g" /var/lib/speedboot/status else echo "$uname_r FAILED (first time)" >> /var/lib/speedboot/status fi fi # system configuration doesn't permit speedboot or speedboot failed, disable it if strstr "$SPEEDBOOT" DISABLED ; then grep -q $uname_r /var/lib/speedboot/status 2> /dev/null RETVAL=$? if [ $RETVAL -eq 0 ]; then sed -i -e "s/^$uname_r .*/$uname_r $SPEEDBOOT/g" /var/lib/speedboot/status else echo "$uname_r $SPEEDBOOT" >> /var/lib/speedboot/status fi fi unset SPEEDBOOT # (pixel) a kind of profile for XF86Config # if no XFree=XXX given on kernel command-line, restore XF86Config.standard for i in XF86Config XF86Config-4; do if [ -L "/etc/X11/$i" ]; then XFree=`sed -n 's/.*XFree=\(\w*\).*/\1/p' /proc/cmdline` [ -n "$XFree" ] || XFree=standard [ -r "/etc/X11/$i.$XFree" ] && ln -sf "$i.$XFree" "/etc/X11/$i" fi done # Let rhgb know that we're leaving rc.sysinit if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then /usr/bin/rhgb-client --sysinit fi # remove this file at the very end, for speedboot rm -f /dev/.in_sysinit