version 1.8.11 released 2009-02-25 * Fix new GCC compilation issues in regards to Packing * Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded for 2.4 kernel instead of ipmi_si_drv driver module * New -y option added to allow specification of kg keys with non-printable characters * New -K option added to allow kgkey settings via environmental variable IPMI_KGKEY * Generic device support added for EEPROM with SDR Type 10h (gendev) * Fix to lan-bridging for a double-bridging crash and to fix an issue with bridging multiple concurrent requests and erroneous handling of raw Send Message * Lanplus fix for commands like 'sensor list' without the -t option causing wrong double bridged requests of a sensor is located on another satellite controller * Fix lan and lanplus request list entry removal bugs * Fix non-working issue when trying to send a bridge message with Cipher 3 * Change bridge message handling to reuse command ipmi_lan_poll_recv * Added PICMG 2.0 and 2.3 support * Fix PICMG (ATCA) extension verification and reversal of BCD encoded values for "major" and "minor" fields * Add IANA support for Pigeon Point * Add OEM SW/FW Record identification * Fix to include I2C and LUN addresses so sensors are correctly managed * Patch ID 1990560 to get readings from non-linear analog sensors * Add support for SOL payload status command * SOL set parameter range checking added * Fixed SOL activate options usage * Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967) * Added retries to SOL keepalive * Fixed wrong mask values for Front Panel disable/enable status * Add support to access fru internal use area * Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow blocks of data within the FRU storage area to be write protected. * Fix node reporting in GUID; Tracker bug #2339675 * Fix watchdog use/action print strings * Fix endian bug in SDR add from file; Tracker bug #2075258 * Fix crash when dumping SDRs in a file and there's an error getting an SDR; improve algorithm for optimal packet size * Fix occasional SDR dump segfault; #1793076 * Allow ipmitool sel delete to accept hex list entry numbers * Fix SEL total space reporting. * Fix for garbage sensor threshold values reported when none returned. Tracker Bug #863748 * ipmievd change to Monitor %used in SEL buffer and log warnings when the buffer is 80% and 100% full version 1.8.10 released 2008-08-08 * Added support for BULL IANA number. * Fixed contrib build so the oem_ibm_sel_map file gets included in rpm builds again. * Added support for Debian packages to be built from CVS * Fix for sdr and sel timestamp reporting issues * Fix for discrete sensor state print routines to address state bits 8-14 * Change ipmi_chassis_status() to non-static so it can be used externally * Added retries to SOL keepalive * Fix to stop sensor list command from reporting a failure due to missing sensor * Fix bug in sdr free space reporting * Add support for IANA number to vendor name conversion for many vendors * Fix segfault bug in lan set command * Fix bug in population of raw i2c wdata buffer * Fix bug in ipmb sensor reading * Fix misspellings, typos, incorrect strncmp lengths, white space * Update/fix printed help and usages for many commands * Add and update support for all commands in ipmitool man page * Fix for lanplus session re-open when the target becomes unavailable following a fw upgrade activation * Add support for watchdog timer shutoff, reset, and get info * Add support for more ibm systems in oem_ibm_sel_map * Add more JEDEC support info for DIMMs; decrease request size for DIMM FRU info to 16 bytes at a time to allow more DIMM FRUs to respond. * Fix to change hpmfwupg to version 1.02; fix to reduce hpmfwupg buffer length more aggressively when no response from iol * Fix HPM firmware activation via IOL; fake a timeout after IOL session re-open to force get upgrade status retry; Added retries on 0xD3 completion code * Add support for freeipmi 0.6.0; adjust autoconf for changes * Fix for oemval2str size * Add support for product name resolution in mc info * Fix FRU display format * Added PICMG ekeying analyzer module support (ekanalyzer); display point to point physical connectivity and power supply information between carriers and AMC modules; display matched results of ekeying match between an on-carrier device and AMC module or between 2 AMC modules * Fix AMC GUID display support * Improved amcportstate operations * Added resolution for new sensor types * Fix segfault in SOL * Fix bug that caused infinite loop on BMCs with empty SDRs * Fix to move out Kontron OEM sensor resolution for other OEMs which could lead to bad event descriptions * Add new FRU edit mode thereby allowing serial numbers, etc. to be changed; improvements to OEM edit mode * Added SPD support for parms: channel number, max read size * Add SDR support for adding SDR records from a dumped file, clearing SDR, adding partial SDR records * Add updates and fixes to hpmfwupg: upload block size to 32 bytes for KCS, handle long response option, implement rollback override, garbage output fix * Add double bridge lan support , fix bridging issue * Add HPM support to pre-check which components need to be skipped * Fix autodetection of maximum packet size when using IPMB * Add new Kontron OEM command to set the BIOS boot option sequence * Add support for dual-bridge/ dual send message * Add auto-detect for local IPMB address using PICMG 2.X extension * Add support for HPM.1 1.0 specification compliance * Fix for improper lan/lanplus addressing * Added transit_channel and transit_addr to ipmi_intf struct * Fix bad password assertion bug due to rakp2 HMAC not being checked properly * Added ability to interpret PPS shelf manager clia sel dump * Corrected PICMG M7 state event definition macros * Added FRU parsing enhancements * Added "isol info", "isol set" and "isol activate" commands to support Intel IPMI v1.5 SOL functionality. Removed "isol setup" command. * Fix bug in ipmi_lan_recv_packet() in lan and lanplus interfaces. * Fix bug in "chassis poh" command. * Fix HPM.1 upgrade to apply to only given component when instructed to do so * Added configure auto-detection if dual bridge extension is supported by OpenIPMI version 1.8.9 released 2007-03-06 * Added initial AMC ekey query operation support * Improvements to ekeying support (PICMG 3.x only) * Added initial interactive edition support for multirec; added IANA verification before interpreting PICMG records. * Added edit support for AMC activation "Maximum Internal Current" * Fix bug generating garbage on the screen when handling GetDeviceId and sol traffic occurs * Added ability to map OEM sensor types to OEM description string using IANA number; moved IANA number table * Fix lan set access command to use value already saved within parameters for PEF and authentication * Fix bug in cmd ipmitool lan stats get 1 * Add support to allow ipmitool/ipmievd to target specific device nodes on multi-BMC systems * Add support for name+privilege lookup for lanplus sessions * Fix time_t conversion bug for 64-bit OS * Added prefix of hostname on sel ipmievd sessions * Fixed FWUM Get Info * Fix ipmievd fd closing bug * Add set-in-progress flag support to chassis bootdev * Added new chassis bootdev options * Add sol payload enable/disable comman * Fix SOL set errors when commit-write not supported * Fix reset of session timeout for lanplus interface * Fixed lan interface accessibility timeout handling * Fix bug with Function Get Channel Cipher Suites command when more than 1 page used. * Fix missing firmware firewall top-level command * Fix bug in SOL keepalive functionality * Fix SOLv2 NACK and retry handling for Intel ESB2 BMC * Added ipmi_sel_get_oem_sensor* APIs * Added HPM.1 support * Fix segfault when incorrect oem option supplied * Fix bus problem with spd command * Fix segfault in SOL when remote BMC does not return packet * Adjust packet length for AMC.0 retricting IPMB packets to 32 bytes * Added lan packet size reduction mechanism * Fix bug with sendMessage of bad length with different target * Fix for big endian (PPC) architecture * NetBSD fixes * Fix segfault and channel problem with user priv command * Add support for bus/chan on i2c raw command * Add freeipmi interface support * Add remote spd printing * Add better detection of linux/compiler.h to config * Makefile changes to fix makedistcheck, etc. version 1.8.8 * Fix segfaults in sensor data repository list * Fix ipmievd to open interface before daemonizing * Fix IPMIv1.5 authtype NONE to ignore supplied password * Fix cipher suite display bug in lan print * Fix typo in IPMIv2 SOL output when sending break * Fix improper LUN handling with Tyan SOL * Add LUN support to OpenIPMI interface * Add support for Kontron OEM commands * Update to Kontron Firmware Update command version 1.8.7 * Remove nuclear clause from license * Add Sun OEM command for blades * Increase argument size for raw commands in shell/exec * Fix handling of LUNs for LAN interfaces * Add IPMIv2 SOL loopback test * Add support for IBM OEM SEL messages * Disable file paranoia checks on read files by default * Support IPMIv2 SOL on older Intel boxes * Display message and exit if keepalive fails during SOL * Add support for setting VLAN id and priority * Add support for FreeBSD OpenIPMI-compatible driver * Add support for IPMIv2 Firmware Firewall * Fix gcc4 compile warnings * Make ipmievd generate pidfile * Add initscripts for ipmievd version 1.8.6 * Fix memory corruption when sending encrypted SOL traffic * Add keepalive timer to IPMIv2 SOL sessions version 1.8.5 * Add support for settable SOL escape character with -e option * Add support for Kg BMC key for IPMIv2 authentication with -k option * Add support for Tyan IPMIv1.5 SOL with tsol command * Add support for PICMG devices * Add support for OEM SEL event parsing * Add support for command bridging over lan and lanplus interfaces * New 'chassis selftest' command * Many bufxies and patches from contributors version 1.8.3 * Add support for 'sel readraw' and 'sel writeraw' commands. * Add support for entering NetFn as a string for RAW commands. * Add support for appending distro tag to integrated RPM builds. * Fix LAN parameter printing to handle Invalid Data Field response without errors. * Add 5ms delay to IPMIv2 SOL retry packets * IPMIv2 interface will now correctly set session privilege level to requested level after session is opened. version 1.8.2 (released May 18 2005) * Fix FRU reading for large (>255 bytes) areas. * Overhaul to ipmievd to support SEL polling in addition to OpenIPMI. * Fix LAN parameter segfault when no Ciphers supported by BMC. * Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus). * Separate option parsing code from main ipmitool source file. * Add raw I2C support with IPMI Master Read-Write command. * Add support for new 'sdr elist' extended output format. * Add support for listing sensors by type with 'sdr type' command. * Add support for new 'sel elist' extended output format that cross-references events with sensors. * Add support for sending dynamically generated platform events based on existing sensor information. * New '-S' argument to read local SDR cache created with 'sdr dump'. * Updated manpage for ipmitool and ipmievd. version 1.8.1 * ipmievd installs in /usr/sbin version 1.8.0 * Fix IPMIv2.0 issues * Fix chassis boot parameter support * Add support for linear sensors version 1.7.1 * Update bmc plugin to work with new Solaris bmc driver (new ioctl for interface detection and new STREAMS message-based interface) version 1.7.0 * Propogate errors correctly so exit status will be useful * More consistent display of errors including completion code text * Errors and debug is send to stderr now * New "sel get" command that will print details about SEL entry and corresponding SDR records as well as FRUs via entity association * Improved event generator, now supports reading events from text file * New "-o oemtype" option for specifying OEM boards exsting types are "supermicro" and "intelwv2" * New PEF subsystem from Tim Murphy at Dell * New "bmc" plugin for Solaris 10 x86 * Many bugfixes and contributed patches version 1.6.2 * Support for Supermicro BMC OEM authentication method version 1.6.1 * Fix minor problem with LAN parameter setting version 1.6.0 * Add a README file * Add Solaris x86 interface plugin * Add support for building Solaris packages * Fix segfault when doing "sel list" (from Matthew Braithwaite) * Fix "chassis identify" on some BMCs (from ebrower@sourceforge) * Add command "bmc info" and related output (from ebrower@sourceforge) * Add support for IPMIv2 and Serial-over-LAN from Jeremy at Newisys * Add support for building RPMs as non-root user * Add new "shell" and "exec" commands * Lots of other contributed patches version 1.5.9 * Add ability to get a particular sensor by name * Add ability to set a particular sensor threshold * Add support for displaying V2 channel authentication levels * Add README for rrdtool scripts in contrib directory * Improve lan interface retry handling * Support prompting for password or reading from environment * Move chaninfo command into channel subcommand * Fix reservation ID handling when two sessions open to BMC * Fix reading of large FRU data * Add configure option for changing binary to ipmiadm for Solaris * Fix compile problem on Solaris 8 version 1.5.8 * Enable static compilation of interfaces * Fix types to be 64-bit safe * Fix compilation problems on Solaris * Fix multiple big-endian problems for Solaris/SPARC * Fix channel access to save settings to NVRAM * Set channel privilege limit to ADMIN during "access on" * Enable gratuitous ARP in bmcautoconf.sh * Add support for Linux kernel panic messages in SEL output * Add support for type 3 SDR records version 1.5.7 * Add IPMIv1.5 eratta fixes * Additions to FRU printing and FRU multirecords * Better handling of SDR printing * Contrib scripts for creating rrdtool graphs version 1.5.6 * Fix SEL event decoding for generic events * Handle empty SEL gracefully when doing "sel list" * Fix sdr handling of sensors that do not return a reading * Fix for CSV display of sensor readings/units from Fredrik Öhrn version 1.5.5 * Add -U option for setting LAN username * Fix -v usage for plugin interfaces version 1.5.4 * Put interface plugin API into library * Fix ipmievd version 1.5.3 * Add -g option to work with grizzly bmc version 1.5.2 * Add support for setting gratuitous arp interval version 1.5.1 * Better SEL support * Fix display bug in SDR list version 1.5.0 * More robust UDP packet handling * Add Intel IMB driver support * Use autoconf/automake/libtool