#ifndef __CAPIUTILS_H__
#define __CAPIUTILS_H__
/*
* This program is free software and may be modified and
* distributed under the terms of the GNU Public License.
*/
#include <sys/types.h>
#include <sys/time.h>
#include <time.h>
#include <capicmd.h>
#ifdef __cplusplus
extern "C" {
#endif
/*----- errornumbers -----*/
#define CapiToManyAppls 0x1001
#define CapiLogBlkSizeToSmall 0x1002
#define CapiBuffExeceeds64k 0x1003
#define CapiMsgBufSizeToSmall 0x1004
#define CapiAnzLogConnNotSupported 0x1005
#define CapiRegReserved 0x1006
#define CapiRegBusy 0x1007
#define CapiRegOSResourceErr 0x1008
#define CapiRegNotInstalled 0x1009
#define CapiRegCtrlerNotSupportExtEquip 0x100a
#define CapiRegCtrlerOnlySupportExtEquip 0x100b
#define CapiNoError 0x0000
#define CapiIllAppNr 0x1101
#define CapiIllCmdOrSubcmdOrMsgToSmall 0x1102
#define CapiSendQueueFull 0x1103
#define CapiReceiveQueueEmpty 0x1104
#define CapiReceiveOverflow 0x1105
#define CapiUnknownNotPar 0x1106
#define CapiMsgBusy 0x1107
#define CapiMsgOSResourceErr 0x1108
#define CapiMsgNotInstalled 0x1109
#define CapiMsgCtrlerNotSupportExtEquip 0x110a
#define CapiMsgCtrlerOnlySupportExtEquip 0x110b
/* standard CAPI2.0 function aliases */
#define CAPI20_REGISTER capi20_register
#define CAPI20_RELEASE capi20_release
#define CAPI20_PUT_MESSAGE capi20_put_message
#define CAPI20_GET_MESSAGE capi20_get_message
#define CAPI20_WaitforMessage capi20_waitformessage
#define CAPI20_GET_MANUFACTURER capi20_get_manufacturer
#define CAPI20_GET_VERSION capi20_get_version
#define CAPI20_GET_SERIAL_NUMBER capi20_get_serial_number
#define CAPI20_GET_PROFILE capi20_get_profile
#define CAPI20_ISINSTALLED capi20_isinstalled
#define CAPI_REGISTER_ERROR unsigned
#define MESSAGE_EXCHANGE_ERROR unsigned
typedef unsigned char *CAPI_MESSAGE;
#if defined(__GLIBC__) && defined(__GLIBC_MINOR__)
#if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || __GLIBC__ > 2
#define HAS_UINT8_T
#include <stdint.h>
#endif
#endif
#ifdef HAS_UINT8_T
typedef uint8_t _cbyte;
typedef uint16_t _cword;
typedef uint32_t _cdword;
typedef uint64_t _cqword;
#else
typedef unsigned char _cbyte;
typedef unsigned short _cword;
typedef unsigned long _cdword;
typedef unsigned long long _cqword;
#endif
typedef CAPI_MESSAGE _cstruct;
typedef enum { CAPI_COMPOSE = 0, CAPI_DEFAULT = 1 } _cmstruct;
/*----- CAPI commands -----*/
#define CAPI_ALERT 0x01
#define CAPI_CONNECT 0x02
#define CAPI_CONNECT_ACTIVE 0x03
#define CAPI_CONNECT_B3_ACTIVE 0x83
#define CAPI_CONNECT_B3 0x82
#define CAPI_CONNECT_B3_T90_ACTIVE 0x88
#define CAPI_DATA_B3 0x86
#define CAPI_DISCONNECT_B3 0x84
#define CAPI_DISCONNECT 0x04
#define CAPI_FACILITY 0x80
#define CAPI_INFO 0x08
#define CAPI_LISTEN 0x05
#define CAPI_MANUFACTURER 0xff
#define CAPI_RESET_B3 0x87
#define CAPI_SELECT_B_PROTOCOL 0x41
/*----- CAPI subcommands -----*/
#define CAPI_REQ 0x80
#define CAPI_CONF 0x81
#define CAPI_IND 0x82
#define CAPI_RESP 0x83
/*-----------------------------------------------------------------------*/
#define CAPIMSG_BASELEN 8
#define CAPIMSG_U8(m, off) (m[off])
#define CAPIMSG_U16(m, off) (m[off]|(m[(off)+1]<<8))
#define CAPIMSG_U32(m, off) (m[off]|(m[(off)+1]<<8)|(m[(off)+2]<<16)|(m[(off)+3]<<24))
#define CAPIMSG_U64(m, off) (((_cqword)CAPIMSG_U32(m, off))|(((_cqword)CAPIMSG_U32(m, off+4))<<32))
#define CAPIMSG_LEN(m) CAPIMSG_U16(m,0)
#define CAPIMSG_APPID(m) CAPIMSG_U16(m,2)
#define CAPIMSG_COMMAND(m) CAPIMSG_U8(m,4)
#define CAPIMSG_SUBCOMMAND(m) CAPIMSG_U8(m,5)
#define CAPIMSG_CMD(m) (((m[4])<<8)|(m[5]))
#define CAPIMSG_MSGID(m) CAPIMSG_U16(m,6)
#define CAPIMSG_CONTROLLER(m) (m[8] & 0x7f)
#define CAPIMSG_CONTROL(m) CAPIMSG_U32(m, 8)
#define CAPIMSG_NCCI(m) CAPIMSG_CONTROL(m)
#define CAPIMSG_DATALEN(m) CAPIMSG_U16(m,16) /* DATA_B3_REQ */
static inline void capimsg_setu8(void *m, int off, _cbyte val)
{
((_cbyte *)m)[off] = val;
}
static inline void capimsg_setu16(void *m, int off, _cword val)
{
((_cbyte *)m)[off] = val & 0xff;
((_cbyte *)m)[off+1] = (val >> 8) & 0xff;
}
static inline void capimsg_setu32(void *m, int off, _cdword val)
{
((_cbyte *)m)[off] = val & 0xff;
((_cbyte *)m)[off+1] = (val >> 8) & 0xff;
((_cbyte *)m)[off+2] = (val >> 16) & 0xff;
((_cbyte *)m)[off+3] = (val >> 24) & 0xff;
}
static inline void capimsg_setu64(void *m, int off, _cqword val)
{
((_cbyte *)m)[off] = val & 0xff;
((_cbyte *)m)[off+1] = (val >> 8) & 0xff;
((_cbyte *)m)[off+2] = (val >> 16) & 0xff;
((_cbyte *)m)[off+3] = (val >> 24) & 0xff;
((_cbyte *)m)[off+4] = (val >> 32) & 0xff;
((_cbyte *)m)[off+5] = (val >> 40) & 0xff;
((_cbyte *)m)[off+6] = (val >> 48) & 0xff;
((_cbyte *)m)[off+7] = (val >> 56) & 0xff;
}
#define CAPIMSG_SETLEN(m, len) capimsg_setu16(m, 0, len)
#define CAPIMSG_SETAPPID(m, applid) capimsg_setu16(m, 2, applid)
#define CAPIMSG_SETCOMMAND(m,cmd) capimsg_setu8(m, 4, cmd)
#define CAPIMSG_SETSUBCOMMAND(m, cmd) capimsg_setu8(m, 5, cmd)
#define CAPIMSG_SETMSGID(m, msgid) capimsg_setu16(m, 6, msgid)
#define CAPIMSG_SETCONTROL(m, contr) capimsg_setu32(m, 8, contr)
#define CAPIMSG_SETDATALEN(m, len) capimsg_setu16(m, 16, len)
/*
* The _cmsg structure contains all possible CAPI 2.0 parameter.
* All parameters are stored here first. The function capi_cmsg2message()
* assembles the parameter and builds CAPI2.0 conform messages.
* capi_message2cmsg disassembles CAPI 2.0 messages and stores the
* parameter in the _cmsg structure
*/
typedef struct {
/* Header */
_cword ApplId;
_cbyte Command;
_cbyte Subcommand;
_cword Messagenumber;
/* Parameter */
union {
_cdword adrController;
_cdword adrPLCI;
_cdword adrNCCI;
} adr;
_cmstruct AdditionalInfo;
_cstruct B1configuration;
_cword B1protocol;
_cstruct B2configuration;
_cword B2protocol;
_cstruct B3configuration;
_cword B3protocol;
_cstruct BC;
_cstruct BChannelinformation;
_cmstruct BProtocol;
_cstruct CalledPartyNumber;
_cstruct CalledPartySubaddress;
_cstruct CallingPartyNumber;
_cstruct CallingPartySubaddress;
_cdword CIPmask;
_cdword CIPmask2;
_cword CIPValue;
_cdword Class;
_cstruct ConnectedNumber;
_cstruct ConnectedSubaddress;
_cdword Data32;
_cqword Data64;
_cword DataHandle;
_cword DataLength;
_cstruct FacilityConfirmationParameter;
_cstruct Facilitydataarray;
_cstruct FacilityIndicationParameter;
_cstruct FacilityRequestParameter;
_cstruct FacilityResponseParameters;
_cword FacilitySelector;
_cword Flags;
_cdword Function;
#ifndef CAPI_LIBRARY_V2
_cstruct Globalconfiguration;
#endif
_cstruct HLC;
_cword Info;
_cstruct InfoElement;
_cdword InfoMask;
_cword InfoNumber;
_cstruct Keypadfacility;
_cstruct LLC;
_cstruct ManuData;
_cdword ManuID;
_cstruct NCPI;
_cword Reason;
_cword Reason_B3;
_cword Reject;
_cstruct Useruserdata;
#ifndef CAPI_LIBRARY_V2
_cstruct SendingComplete;
#endif
unsigned char *Data;
/* intern */
_cword l;
unsigned p;
unsigned char *par;
_cbyte *m;
/* buffer to construct message */
_cbyte buf[180];
} _cmsg;
/*
* capi_cmsg2message() assembles the parameter from _cmsg to a CAPI 2.0
* conform message
*/
#define capi20_cmsg2message capi_cmsg2message
unsigned capi_cmsg2message(_cmsg *cmsg, unsigned char *msg);
/*
* capi20_message2cmsg disassembles a CAPI message an writes the parameter
* into _cmsg for easy access
*/
#define capi20_message2cmsg capi_message2cmsg
unsigned capi_message2cmsg (_cmsg *cmsg, unsigned char *msg);
/*
* capi20_cmsg_header() fills the _cmsg structure with default values,
* so only parameter with non default values must be changed before
* sending the message.
*/
#define CAPI_CMSG_HEADER capi_cmsg_header
#define capi20_cmsg_header capi_cmsg_header
unsigned capi_cmsg_header (_cmsg *cmsg, unsigned _ApplId, _cbyte _Command, _cbyte _Subcommand, _cword _Messagenumber, _cdword _Controller);
/*
* capi_cmsg_answer() is used to answer indications. It changes the header
* of an indication to a response, and leaves all other parameters the same
*/
#define capi20_cmsg_answer capi_cmsg_answer
static inline void capi_cmsg_answer(_cmsg * cmsg)
{
cmsg->Subcommand |= 0x01;
}
/*
* capi_get_cmsg() works like capi20_get_message() and converts the
* CAPI message * to a _cmsg with capi_message2cmsg().
* Possible errors from capi20_get_message() will be returned.
*/
#define CAPI_GET_CMSG capi_get_cmsg
#define capi20_get_cmsg capi_get_cmsg
unsigned capi_get_cmsg(_cmsg *cmsg, unsigned applid);
/*
* capi_put_cmsg() works like capi20_put_message() but it converts the
* _cmsg * first with capi_cmsg2message(). Possible errors from
* capi_put_message() will be returned.
*/
#define CAPI_PUT_CMSG capi_put_cmsg
#define capi20_put_cmsg capi_put_cmsg
unsigned capi_put_cmsg(_cmsg *cmsg);
/*-----------------------------------------------------------------------*/
/*
* Debugging / Tracing functions
*/
/*
* capi_info2str generated a readable string for Capi2.0 reasons.
*/
#define capi20_info2str capi_info2str
char *capi_info2str(_cword reason);
#define capi20_cmd2str capi_cmd2str
char *capi_cmd2str(_cbyte cmd, _cbyte subcmd);
#define capi20_cmsg2str capi_cmsg2str
char *capi_cmsg2str(_cmsg * cmsg);
#define capi20_message2str capi_message2str
char *capi_message2str(_cbyte * msg);
/*-----------------------------------------------------------------------*/
#define ALERT_REQ_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define ALERT_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional info elements */
#define ALERT_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define ALERT_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define ALERT_REQ_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define ALERT_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define ALERT_CONF_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define ALERT_CONF_INFO(x) ((x)->Info)
/* 0: alert initiated */
/* 0x0003: alert already sent by another application */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal PLCI */
/* 0x2007: illegal message parameter coding */
#define CONNECT_REQ_CONTROLLER(x) ((x)->adr.adrController)
#define CONNECT_REQ_CIPVALUE(x) ((x)->CIPValue)
/* Compatibility Information Profile */
#define CONNECT_REQ_CALLEDPARTYNUMBER(x) ((x)->CalledPartyNumber)
/* Called party number */
#define CONNECT_REQ_CALLINGPARTYNUMBER(x) ((x)->CallingPartyNumber)
/* Calling party number */
#define CONNECT_REQ_CALLEDPARTYSUBADDRESS(x) ((x)->CalledPartySubaddress)
/* Called party subaddress */
#define CONNECT_REQ_CALLINGPARTYSUBADDRESS(x) ((x)->CallingPartySubaddress)
/* Calling party subaddress */
#define CONNECT_REQ_BPROTOCOL(x) ((x)->BProtocol)
/* B protocol to be used */
#define CONNECT_REQ_B1PROTOCOL(x) ((x)->B1protocol)
/* Physical layer and framing */
#define CONNECT_REQ_B2PROTOCOL(x) ((x)->B2protocol)
/* Data link layer */
#define CONNECT_REQ_B3PROTOCOL(x) ((x)->B3protocol)
/* Network layer */
#define CONNECT_REQ_B1CONFIGURATION(x) ((x)->B1configuration)
/* Physical layer and framing parameter */
#define CONNECT_REQ_B2CONFIGURATION(x) ((x)->B2configuration)
/* Data link layer parameter */
#define CONNECT_REQ_B3CONFIGURATION(x) ((x)->B3configuration)
/* Network layer parameter */
#ifndef CAPI_LIBRARY_V2
#define CONNECT_REQ_GLOBALCONFIGURATION(x) ((x)->Globalconfiguration)
/* all layer parameter */
#endif
#define CONNECT_REQ_BC(x) ((x)->BC)
/* Bearer Capability */
#define CONNECT_REQ_LLC(x) ((x)->LLC)
/* Low Layer Compatibility */
#define CONNECT_REQ_HLC(x) ((x)->HLC)
/* High Layer Compatibility */
#define CONNECT_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional information elements */
#define CONNECT_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define CONNECT_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_REQ_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define CONNECT_CONF_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_CONF_INFO(x) ((x)->Info)
/* 0: connect initiated */
/* 0x2002: illegal controller */
/* 0x2003: out of PLCI */
/* 0x2007: illegal message parameter coding */
/* 0x3001: B1 protocol not supported */
/* 0x3002: B2 protocol not supported */
/* 0x3003: B3 protocol not supported */
/* 0x3004: B1 protocol parameter not supported */
/* 0x3005: B2 protocol parameter not supported */
/* 0x3006: B3 protocol parameter not supported */
/* 0x3007: B protocol combination not supported */
/* 0x300A: CIP Value unknown */
#define CONNECT_IND_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_IND_CIPVALUE(x) ((x)->CIPValue)
/* Compatibility Information Profile */
#define CONNECT_IND_CALLEDPARTYNUMBER(x) ((x)->CalledPartyNumber)
/* Called party number */
#define CONNECT_IND_CALLINGPARTYNUMBER(x) ((x)->CallingPartyNumber)
/* Calling party number */
#define CONNECT_IND_CALLEDPARTYSUBADDRESS(x) ((x)->CalledPartySubaddress)
/* Called party subaddress */
#define CONNECT_IND_CALLINGPARTYSUBADDRESS(x) ((x)->CallingPartySubaddress)
/* Calling party subaddress */
#define CONNECT_IND_BC(x) ((x)->BC)
/* Bearer compatibility */
#define CONNECT_IND_LLC(x) ((x)->LLC)
/* Low Layer Compatibility */
#define CONNECT_IND_HLC(x) ((x)->HLC)
/* High Layer Compatibility */
#define CONNECT_IND_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional information elements */
#define CONNECT_IND_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define CONNECT_IND_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_IND_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_IND_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define CONNECT_RESP_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_RESP_REJECT(x) ((x)->Reject)
/* 0: accept call */
/* 1: ignore call */
/* 2: reject call, normal call clearing */
/* 3: reject call, user busy */
/* 4: reject call, requestet circuit/channel not available */
/* 5: reject call, facility rejected */
/* 6: reject call, channel unacceptable */
/* 7: reject call, incompatible destination */
/* 8: reject call, destination out of order */
#define CONNECT_RESP_BPROTOCOL(x) ((x)->BProtocol)
/* B protocol to be used */
#define CONNECT_RESP_B1PROTOCOL(x) ((x)->B1protocol)
/* Physical layer and framing */
#define CONNECT_RESP_B2PROTOCOL(x) ((x)->B2protocol)
/* Data link layer */
#define CONNECT_RESP_B3PROTOCOL(x) ((x)->B3protocol)
/* Network layer */
#define CONNECT_RESP_B1CONFIGURATION(x) ((x)->B1configuration)
/* Physical layer and framing parameter */
#define CONNECT_RESP_B2CONFIGURATION(x) ((x)->B2configuration)
/* Data link layer parameter */
#define CONNECT_RESP_B3CONFIGURATION(x) ((x)->B3configuration)
/* Network layer parameter */
#ifndef CAPI_LIBRARY_V2
#define CONNECT_RESP_GLOBALCONFIGURATION(x) ((x)->Globalconfiguration)
/* all layer parameter */
#endif
#define CONNECT_RESP_CONNECTEDNUMBER(x) ((x)->ConnectedNumber)
/* Connected number */
#define CONNECT_RESP_CONNECTEDSUBADDRESS(x) ((x)->ConnectedSubaddress)
/* Connected subaddress */
#define CONNECT_RESP_LLC(x) ((x)->LLC)
/* Low Layer Compatibility */
#define CONNECT_RESP_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional information elements */
#define CONNECT_RESP_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define CONNECT_RESP_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_RESP_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_RESP_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define CONNECT_ACTIVE_IND_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_ACTIVE_IND_CONNECTEDNUMBER(x) ((x)->ConnectedNumber)
/* Connected number */
#define CONNECT_ACTIVE_IND_CONNECTEDSUBADDRESS(x) ((x)->ConnectedSubaddress)
/* Connected subaddress */
#define CONNECT_ACTIVE_IND_LLC(x) ((x)->LLC)
/* Low Layer Compatibility */
#define CONNECT_ACTIVE_RESP_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_B3_ACTIVE_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_ACTIVE_IND_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define CONNECT_B3_ACTIVE_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_REQ_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_B3_REQ_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define CONNECT_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_CONF_INFO(x) ((x)->Info)
/* 0: connect initiated */
/* 0x0001: NCPI not supported by current protocol, NCPI ignored */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal PLCI */
/* 0x2004: out of NCCI */
/* 0x3008: NCPI not supported */
#define CONNECT_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_IND_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define CONNECT_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_RESP_REJECT(x) ((x)->Reject)
/* 0: accept call */
/* 2: reject call, normal call clearing */
#define CONNECT_B3_RESP_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define CONNECT_B3_T90_ACTIVE_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_T90_ACTIVE_IND_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define CONNECT_B3_T90_ACTIVE_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DATA_B3_REQ_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DATA_B3_REQ_DATA(x) ((x)->Data)
/* Pointer to the data to be sent */
#define DATA_B3_REQ_DATALENGTH(x) ((x)->DataLength)
/* Size of data area to be sent */
#define DATA_B3_REQ_DATAHANDLE(x) ((x)->DataHandle)
/* Referenced in DATA_B3_CONF */
#define DATA_B3_REQ_FLAGS(x) ((x)->Flags)
/* [0]: qualifier bit */
/* [1]: more data bit */
/* [2]: delivery confirmation bit */
/* [3]: expedited data */
/* [4] to [15]: reserved */
#define DATA_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DATA_B3_CONF_DATAHANDLE(x) ((x)->DataHandle)
/* Identifies the data area of corresponding DATA_B3_REQ */
#define DATA_B3_CONF_INFO(x) ((x)->Info)
/* 0: data transmission initiated */
/* 0x0002: flags not supported by current protocol, flags ignored */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal NCCI */
/* 0x2007: illegal message parameter coding */
/* 0x300A: flags not supported (reserved bits) */
/* 0x300C: data length not supported by current protocol */
#define DATA_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DATA_B3_IND_DATA(x) ((x)->Data)
/* Pointer to data received */
#define DATA_B3_IND_DATALENGTH(x) ((x)->DataLength)
/* Size of data area received */
#define DATA_B3_IND_DATAHANDLE(x) ((x)->DataHandle)
/* handle to data area, referenced in DATA_B3_RESP */
#define DATA_B3_IND_FLAGS(x) ((x)->Flags)
/* 0: qualifier bit */
/* 1: more-data bit */
/* 2: delivery confirmation bit */
/* 3: expedited data */
/* 4 to 14: reserved */
/* [15]: framing error bit, data may be invalid (only with corresponding B2 protocol) */
#define DATA_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DATA_B3_RESP_DATAHANDLE(x) ((x)->DataHandle)
/* Data area reference in corresponding DATA_B3_IND */
#define DISCONNECT_B3_REQ_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DISCONNECT_B3_REQ_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define DISCONNECT_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DISCONNECT_B3_CONF_INFO(x) ((x)->Info)
/* 0: disconnect initiated */
/* 0x0001: NCPI not supported by current protocol, NCPI ignored */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal NCCI */
/* 0x2007: illegal message parameter coding */
/* 0x3008: NCPI not supported */
#define DISCONNECT_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DISCONNECT_B3_IND_REASON_B3(x) ((x)->Reason_B3)
/* 0: clearing according to protocol */
/* 0x3301: protocol error layer 1 */
/* 0x3302: protocol error layer 2 */
/* 0x3303: protocol error layer 3 */
/* protocol dependent values are described in chapter 6 */
#define DISCONNECT_B3_IND_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define DISCONNECT_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DISCONNECT_REQ_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define DISCONNECT_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional information elements */
#define DISCONNECT_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define DISCONNECT_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define DISCONNECT_REQ_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define DISCONNECT_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define DISCONNECT_CONF_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define DISCONNECT_CONF_INFO(x) ((x)->Info)
/* 0: disconnect initiated */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal PLCI */
/* 0x2007: illegal message parameter coding */
#define DISCONNECT_IND_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define DISCONNECT_IND_REASON(x) ((x)->Reason)
/* 0: no cause available */
/* 0x3301: protocol error layer 1 */
/* 0x3302: protocol error layer 2 */
/* 0x3303: protocol error layer 3 */
/* 0x3304: another application got that call */
/* 0x34xx: disconnect cause from the network according to Q.931/ETS 300 102-1. In the field 'xx' the cause value received within a cause information element (octet 4) from the network is indicated. */
#define DISCONNECT_RESP_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define FACILITY_REQ_CONTROLLER(x) ((x)->adr.adrController)
#define FACILITY_REQ_PLCI(x) ((x)->adr.adrPLCI)
#define FACILITY_REQ_NCCI(x) ((x)->adr.adrNCCI)
/* Depending on the facility selector */
#define FACILITY_REQ_FACILITYSELECTOR(x) ((x)->FacilitySelector)
/* 0: Handset Support */
/* 1: DTMF */
/* 2 to n: reserved */
#define FACILITY_REQ_FACILITYREQUESTPARAMETER(x) ((x)->FacilityRequestParameter)
/* Facility depending parameters */
#define FACILITY_CONF_CONTROLLER(x) ((x)->adr.adrController)
#define FACILITY_CONF_PLCI(x) ((x)->adr.adrPLCI)
#define FACILITY_CONF_NCCI(x) ((x)->adr.adrNCCI)
/* Depending on the facility selector */
#define FACILITY_CONF_INFO(x) ((x)->Info)
/* 0: request accepted */
/* 0x2001: message not supported in current state */
/* 0x2002: incorrect Controller/PLCI/NCCI */
/* 0x2007: illegal message parameter coding */
/* 0x300B: facility not supported */
#define FACILITY_CONF_FACILITYSELECTOR(x) ((x)->FacilitySelector)
/* 0: Handset Support */
/* 1: DTMF */
/* 2 to n: reserved */
#define FACILITY_CONF_FACILITYCONFIRMATIONPARAMETER(x) ((x)->FacilityConfirmationParameter)
/* Facility-depending parameters */
#define FACILITY_IND_CONTROLLER(x) ((x)->adr.adrController)
#define FACILITY_IND_PLCI(x) ((x)->adr.adrPLCI)
#define FACILITY_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Depending on the facility selector */
#define FACILITY_IND_FACILITYSELECTOR(x) ((x)->FacilitySelector)
/* 0: Handset Support */
/* 1: DTMF */
/* 2 to n: reserved */
#define FACILITY_IND_FACILITYINDICATIONPARAMETER(x) ((x)->FacilityIndicationParameter)
/* Facility-depending parameters */
#define FACILITY_RESP_CONTROLLER(x) ((x)->adr.adrController)
#define FACILITY_RESP_PLCI(x) ((x)->adr.adrPLCI)
#define FACILITY_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Depending on the facility selector */
#define FACILITY_RESP_FACILITYSELECTOR(x) ((x)->FacilitySelector)
/* 0: Handset Support */
/* 1: DTMF */
/* 2 to n: reserved */
/* Facility response parameters */
/* struct */
/* Facility-depending parameters */
#define INFO_REQ_CONTROLLER(x) ((x)->adr.adrController)
#define INFO_REQ_PLCI(x) ((x)->adr.adrPLCI)
/* See note */
#define INFO_REQ_CALLEDPARTYNUMBER(x) ((x)->CalledPartyNumber)
/* Called party number */
#define INFO_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional information elements */
#define INFO_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define INFO_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define INFO_REQ_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define INFO_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define INFO_CONF_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define INFO_CONF_INFO(x) ((x)->Info)
/* 0: transmission of information initiated */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal Controller/PLCI */
/* 0x2003: out of PLCI */
/* 0x2007: illegal message parameter coding */
#define INFO_IND_CONTROLLER(x) ((x)->adr.adrController)
#define INFO_IND_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define INFO_IND_INFONUMBER(x) ((x)->InfoNumber)
/* Information element identifier */
#define INFO_IND_INFOELEMENT(x) ((x)->InfoElement)
/* Information element dependent structure */
#define INFO_RESP_CONTROLLER(x) ((x)->adr.adrController)
#define INFO_RESP_PLCI(x) ((x)->adr.adrPLCI)
/* As in INFO_IND */
#define LISTEN_REQ_CONTROLLER(x) ((x)->adr.adrController)
#define LISTEN_REQ_INFOMASK(x) ((x)->InfoMask)
/* Bit field, coding as follows: */
/* 0: cause */
/* 1: date/Time */
/* 2: display */
/* 3: user-user information */
/* 4: call progression */
/* 5: facility */
/* 6: charging */
/* 7 to 31: reserved */
#define LISTEN_REQ_CIPMASK(x) ((x)->CIPmask)
/* Bit field, coding as follows: */
/* 0: any match */
/* 1: speech */
/* 2: unrestricted digital information */
/* 3: restricted digital information */
/* 4: 3.1 kHz audio */
/* 5: 7.0 kHz audio */
/* 6: video */
/* 7: packet mode */
/* 8: 56 kBit/s rate adaptation */
/* 9: unrestricted digital information with tones/announcements */
/* 10..15: reserved */
/* 16: telephony */
/* 17: fax group 2/3 */
/* 18: fax group 4 class 1 */
/* 19: Teletex service (basic and mixed), fax group 4 class 2 */
/* 20: Teletex service (basic and processable) */
/* 21: Teletex service (basic) */
/* 22: Videotex */
/* 23: Telex */
/* reserved for additional services */
/* 25: OSI applications according X.200 */
/* 26: 7 kHz Telephony */
/* 27: Video Telephony F.721, first connection */
/* 28: Video Telephony F.721, second connection */
/* 29 to 31: reserved */
#define LISTEN_REQ_CIPMASK2(x) ((x)->CIPmask2)
/* reserved for additional services */
#define LISTEN_REQ_CALLINGPARTYNUMBER(x) ((x)->CallingPartyNumber)
/* Calling party number */
#define LISTEN_REQ_CALLINGPARTYSUBADDRESS(x) ((x)->CallingPartySubaddress)
/* Calling party subaddress */
#define LISTEN_CONF_CONTROLLER(x) ((x)->adr.adrController)
#define LISTEN_CONF_INFO(x) ((x)->Info)
/* 0: listen is active */
/* 0x2002: illegal controller */
/* 0x2005: out of LISTEN-Resources */
/* 0x2007: illegal message parameter coding */
#define MANUFACTURER_REQ_CONTROLLER(x) ((x)->adr.adrController)
#define MANUFACTURER_REQ_MANUID(x) ((x)->ManuID)
/* Manufacturer specific ID (should be unique) */
/* Manufacturer specific */
#define MANUFACTURER_REQ_CLASS(x) ((x)->Class)
#define MANUFACTURER_REQ_FUNCTION(x) ((x)->Function)
#define MANUFACTURER_REQ_MANUDATA(x) ((x)->ManuData)
/* Manufacturer specific data */
#define MANUFACTURER_CONF_CONTROLLER(x) ((x)->adr.adrController)
#define MANUFACTURER_CONF_MANUID(x) ((x)->ManuID)
/* Manufacturer specific ID (should be unique) */
/* Manufacturer specific */
#define MANUFACTURER_CONF_CLASS(x) ((x)->Class)
#define MANUFACTURER_CONF_FUNCTION(x) ((x)->Function)
#define MANUFACTURER_CONF_MANUDATA(x) ((x)->ManuData)
/* Manufacturer specific data */
#define MANUFACTURER_IND_CONTROLLER(x) ((x)->adr.adrController)
#define MANUFACTURER_IND_MANUID(x) ((x)->ManuID)
/* Manufacturer specific ID (should be unique) */
/* Manufacturer specific */
#define MANUFACTURER_IND_CLASS(x) ((x)->Class)
#define MANUFACTURER_IND_FUNCTION(x) ((x)->Function)
#define MANUFACTURER_IND_MANUDATA(x) ((x)->ManuData)
/* Manufacturer specific data */
#define MANUFACTURER_RESP_CONTROLLER(x) ((x)->adr.adrController)
#define MANUFACTURER_RESP_MANUID(x) ((x)->ManuID)
/* Manufacturer specific ID (should be unique) */
/* Manufacturer specific */
#define MANUFACTURER_RESP_CLASS(x) ((x)->Class)
#define MANUFACTURER_RESP_FUNCTION(x) ((x)->Function)
#define MANUFACTURER_RESP_MANUDATA(x) ((x)->ManuData)
/* Manufacturer specific data */
#define RESET_B3_REQ_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define RESET_B3_REQ_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define RESET_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define RESET_B3_CONF_INFO(x) ((x)->Info)
/* 0: reset initiated */
/* 0x0001: NCPI not supported by current protocol, NCPI ignored */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal NCCI */
/* 0x2007: illegal message parameter coding */
/* 0x3008: NCPI not supported */
/* 0x300D: reset procedure not supported by current protocol */
#define RESET_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define RESET_B3_IND_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define RESET_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define SELECT_B_PROTOCOL_REQ_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define SELECT_B_PROTOCOL_REQ_BPROTOCOL(x) ((x)->BProtocol)
/* Protocol definition */
#define SELECT_B_PROTOCOL_REQ_B1PROTOCOL(x) ((x)->B1protocol)
/* Physical layer and framing */
#define SELECT_B_PROTOCOL_REQ_B2PROTOCOL(x) ((x)->B2protocol)
/* Data link layer */
#define SELECT_B_PROTOCOL_REQ_B3PROTOCOL(x) ((x)->B3protocol)
/* Network layer */
#define SELECT_B_PROTOCOL_REQ_B1CONFIGURATION(x) ((x)->B1configuration)
/* Physical layer and framing parameter */
#define SELECT_B_PROTOCOL_REQ_B2CONFIGURATION(x) ((x)->B2configuration)
/* Data link layer parameter */
#define SELECT_B_PROTOCOL_REQ_B3CONFIGURATION(x) ((x)->B3configuration)
/* Network layer parameter */
#ifndef CAPI_LIBRARY_V2
#define SELECT_B_PROTOCOL_REQ_GLOBALCONFIGURATION(x) ((x)->Globalconfiguration)
/* all layer parameter */
#endif
#define SELECT_B_PROTOCOL_CONF_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define SELECT_B_PROTOCOL_CONF_INFO(x) ((x)->Info)
/* 0: protocol switch successful */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal PLCI */
/* 0x2007: illegal message parameter coding */
/* 0x3001: B1 protocol not supported */
/* 0x3002: B2 protocol not supported */
/* 0x3003: B3 protocol not supported */
/* 0x3004: B1 protocol parameter not supported */
/* 0x3005: B2 protocol parameter not supported */
/* 0x3006: B3 protocol parameter not supported */
/* 0x3007: B protocol combination not supported */
/*----- tests for specific commands -----*/
#define IS_CONNECT_IND(m) ((m)->Command==0x02 && (m)->Subcommand==0x82)
#define IS_CONNECT_ACTIVE_IND(m) ((m)->Command==0x03 && (m)->Subcommand==0x82)
#define IS_CONNECT_B3_ACTIVE_IND(m) ((m)->Command==0x83 && (m)->Subcommand==0x82)
#define IS_CONNECT_B3_IND(m) ((m)->Command==0x82 && (m)->Subcommand==0x82)
#define IS_CONNECT_B3_T90_ACTIVE_IND(m) ((m)->Command==0x88 && (m)->Subcommand==0x82)
#define IS_DATA_B3_IND(m) ((m)->Command==0x86 && (m)->Subcommand==0x82)
#define IS_DISCONNECT_B3_IND(m) ((m)->Command==0x84 && (m)->Subcommand==0x82)
#define IS_DISCONNECT_IND(m) ((m)->Command==0x04 && (m)->Subcommand==0x82)
#define IS_FACILITY_IND(m) ((m)->Command==0x80 && (m)->Subcommand==0x82)
#define IS_INFO_IND(m) ((m)->Command==0x08 && (m)->Subcommand==0x82)
#define IS_MANUFACTURER_IND(m) ((m)->Command==0xff && (m)->Subcommand==0x82)
#define IS_RESET_B3_IND(m) ((m)->Command==0x87 && (m)->Subcommand==0x82)
#define IS_ALERT_CONF(m) ((m)->Command==0x01 && (m)->Subcommand==0x81)
#define IS_CONNECT_CONF(m) ((m)->Command==0x02 && (m)->Subcommand==0x81)
#define IS_CONNECT_B3_CONF(m) ((m)->Command==0x82 && (m)->Subcommand==0x81)
#define IS_DATA_B3_CONF(m) ((m)->Command==0x86 && (m)->Subcommand==0x81)
#define IS_DISCONNECT_B3_CONF(m) ((m)->Command==0x84 && (m)->Subcommand==0x81)
#define IS_DISCONNECT_CONF(m) ((m)->Command==0x04 && (m)->Subcommand==0x81)
#define IS_FACILITY_CONF(m) ((m)->Command==0x80 && (m)->Subcommand==0x81)
#define IS_INFO_CONF(m) ((m)->Command==0x08 && (m)->Subcommand==0x81)
#define IS_LISTEN_CONF(m) ((m)->Command==0x05 && (m)->Subcommand==0x81)
#define IS_MANUFACTURER_CONF(m) ((m)->Command==0xff && (m)->Subcommand==0x81)
#define IS_RESET_B3_CONF(m) ((m)->Command==0x87 && (m)->Subcommand==0x81)
#define IS_SELECT_B_PROTOCOL_CONF(m) ((m)->Command==0x41 && (m)->Subcommand==0x81)
/*----- header functions that fill the _cmsg structure with default -----*/
/*----- values. Only nonstandard parameter need to be changed -----*/
#define ALERT_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x01,0x80,Messagenumber,adr)
#define CONNECT_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x02,0x80,Messagenumber,adr)
#define CONNECT_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x82,0x80,Messagenumber,adr)
#define DATA_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x86,0x80,Messagenumber,adr)
#define DISCONNECT_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x84,0x80,Messagenumber,adr)
#define DISCONNECT_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x04,0x80,Messagenumber,adr)
#define FACILITY_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x80,0x80,Messagenumber,adr)
#define INFO_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x08,0x80,Messagenumber,adr)
#define LISTEN_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x05,0x80,Messagenumber,adr)
#define MANUFACTURER_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0xff,0x80,Messagenumber,adr)
#define RESET_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x87,0x80,Messagenumber,adr)
#define SELECT_B_PROTOCOL_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x41,0x80,Messagenumber,adr)
#define CONNECT_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x02,0x83,Messagenumber,adr)
#define CONNECT_ACTIVE_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x03,0x83,Messagenumber,adr)
#define CONNECT_B3_ACTIVE_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x83,0x83,Messagenumber,adr)
#define CONNECT_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x82,0x83,Messagenumber,adr)
#define CONNECT_B3_T90_ACTIVE_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x88,0x83,Messagenumber,adr)
#define DATA_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x86,0x83,Messagenumber,adr)
#define DISCONNECT_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x84,0x83,Messagenumber,adr)
#define DISCONNECT_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x04,0x83,Messagenumber,adr)
#define FACILITY_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x80,0x83,Messagenumber,adr)
#define INFO_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x08,0x83,Messagenumber,adr)
#define MANUFACTURER_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0xff,0x83,Messagenumber,adr)
#define RESET_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x87,0x83,Messagenumber,adr)
/*
* CAPI-functions that correspond to the CAPI messages specified in the
* CAPI 2.0 specification. All possible parameter have to be specified.
* The CAPI message is sent immediately when calling these functions,
* return values are the same as in capi_put_message()
*/
unsigned ALERT_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct BChannelinformation
,_cstruct Keypadfacility
,_cstruct Useruserdata
,_cstruct Facilitydataarra
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
);
unsigned CONNECT_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword CIPValue
,_cstruct CalledPartyNumber
,_cstruct CallingPartyNumber
,_cstruct CalledPartySubaddress
,_cstruct CallingPartySubaddress
,_cword B1protocol
,_cword B2protocol
,_cword B3protocol
,_cstruct B1configuration
,_cstruct B2configuration
,_cstruct B3configuration
#ifndef CAPI_LIBRARY_V2
,_cstruct Globalconfiguration
#endif
,_cstruct BC
,_cstruct LLC
,_cstruct HLC
,_cstruct BChannelinformation
,_cstruct Keypadfacility
,_cstruct Useruserdata
,_cstruct Facilitydataarray
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
);
unsigned CONNECT_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct NCPI);
unsigned DATA_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,void * Data
,_cword DataLength
,_cword DataHandle
,_cword Flags);
unsigned DISCONNECT_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct NCPI);
unsigned DISCONNECT_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct BChannelinformation
,_cstruct Keypadfacility
,_cstruct Useruserdata
,_cstruct Facilitydataarray);
unsigned FACILITY_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword FacilitySelector
,_cstruct FacilityRequestParameter);
unsigned INFO_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct CalledPartyNumber
,_cstruct BChannelinformation
,_cstruct Keypadfacility
,_cstruct Useruserdata
,_cstruct Facilitydataarray
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
);
unsigned LISTEN_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cdword InfoMask
,_cdword CIPmask
,_cdword CIPmask2
,_cstruct CallingPartyNumber
,_cstruct CallingPartySubaddress);
unsigned MANUFACTURER_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cdword ManuID
,_cdword Class
,_cdword Function
,_cstruct ManuData);
unsigned RESET_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct NCPI);
unsigned SELECT_B_PROTOCOL_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword B1protocol
,_cword B2protocol
,_cword B3protocol
,_cstruct B1configuration
,_cstruct B2configuration
,_cstruct B3configuration
#ifndef CAPI_LIBRARY_V2
,_cstruct Globalconfiguration
#endif
);
unsigned CONNECT_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword Reject
,_cword B1protocol
,_cword B2protocol
,_cword B3protocol
,_cstruct B1configuration
,_cstruct B2configuration
,_cstruct B3configuration
#ifndef CAPI_LIBRARY_V2
,_cstruct Globalconfiguration
#endif
,_cstruct ConnectedNumber
,_cstruct ConnectedSubaddress
,_cstruct LLC
,_cstruct BChannelinformation
,_cstruct Keypadfacility
,_cstruct Useruserdata
,_cstruct Facilitydataarray);
unsigned CONNECT_ACTIVE_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned CONNECT_B3_ACTIVE_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned CONNECT_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword Reject
,_cstruct NCPI);
unsigned CONNECT_B3_T90_ACTIVE_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned DATA_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword DataHandle);
unsigned DISCONNECT_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned DISCONNECT_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned FACILITY_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword FacilitySelector
,_cstruct FacilityResponseParameters);
unsigned INFO_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned MANUFACTURER_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cdword ManuID
,_cdword Class
,_cdword Function
,_cstruct ManuData);
unsigned RESET_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
/*-----------------------------------------------------------------------*/
static inline void capi_fill_CONNECT_B3_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct NCPI)
{
capi_cmsg_header(cmsg, ApplId, 0x82, 0x80, Messagenumber, adr);
cmsg->NCPI = NCPI;
}
static inline void capi_fill_FACILITY_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword FacilitySelector,
_cstruct FacilityRequestParameter)
{
capi_cmsg_header(cmsg, ApplId, 0x80, 0x80, Messagenumber, adr);
cmsg->FacilitySelector = FacilitySelector;
cmsg->FacilityRequestParameter = FacilityRequestParameter;
}
static inline void capi_fill_INFO_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct CalledPartyNumber,
_cstruct BChannelinformation,
_cstruct Keypadfacility,
_cstruct Useruserdata,
_cstruct Facilitydataarray
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
)
{
capi_cmsg_header(cmsg, ApplId, 0x08, 0x80, Messagenumber, adr);
cmsg->CalledPartyNumber = CalledPartyNumber;
cmsg->BChannelinformation = BChannelinformation;
cmsg->Keypadfacility = Keypadfacility;
cmsg->Useruserdata = Useruserdata;
cmsg->Facilitydataarray = Facilitydataarray;
#ifndef CAPI_LIBRARY_V2
cmsg->SendingComplete = SendingComplete;
#endif
}
static inline void capi_fill_LISTEN_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cdword InfoMask,
_cdword CIPmask,
_cdword CIPmask2,
_cstruct CallingPartyNumber,
_cstruct CallingPartySubaddress)
{
capi_cmsg_header(cmsg, ApplId, 0x05, 0x80, Messagenumber, adr);
cmsg->InfoMask = InfoMask;
cmsg->CIPmask = CIPmask;
cmsg->CIPmask2 = CIPmask2;
cmsg->CallingPartyNumber = CallingPartyNumber;
cmsg->CallingPartySubaddress = CallingPartySubaddress;
}
static inline void capi_fill_ALERT_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct BChannelinformation,
_cstruct Keypadfacility,
_cstruct Useruserdata,
_cstruct Facilitydataarray
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
)
{
capi_cmsg_header(cmsg, ApplId, 0x01, 0x80, Messagenumber, adr);
cmsg->BChannelinformation = BChannelinformation;
cmsg->Keypadfacility = Keypadfacility;
cmsg->Useruserdata = Useruserdata;
cmsg->Facilitydataarray = Facilitydataarray;
#ifndef CAPI_LIBRARY_V2
cmsg->SendingComplete = SendingComplete;
#endif
}
static inline void capi_fill_CONNECT_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword CIPValue,
_cstruct CalledPartyNumber,
_cstruct CallingPartyNumber,
_cstruct CalledPartySubaddress,
_cstruct CallingPartySubaddress,
_cword B1protocol,
_cword B2protocol,
_cword B3protocol,
_cstruct B1configuration,
_cstruct B2configuration,
_cstruct B3configuration,
#ifndef CAPI_LIBRARY_V2
_cstruct Globalconfiguration,
#endif
_cstruct BC,
_cstruct LLC,
_cstruct HLC,
_cstruct BChannelinformation,
_cstruct Keypadfacility,
_cstruct Useruserdata,
_cstruct Facilitydataarray
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
)
{
capi_cmsg_header(cmsg, ApplId, 0x02, 0x80, Messagenumber, adr);
cmsg->CIPValue = CIPValue;
cmsg->CalledPartyNumber = CalledPartyNumber;
cmsg->CallingPartyNumber = CallingPartyNumber;
cmsg->CalledPartySubaddress = CalledPartySubaddress;
cmsg->CallingPartySubaddress = CallingPartySubaddress;
cmsg->B1protocol = B1protocol;
cmsg->B2protocol = B2protocol;
cmsg->B3protocol = B3protocol;
cmsg->B1configuration = B1configuration;
cmsg->B2configuration = B2configuration;
cmsg->B3configuration = B3configuration;
#ifndef CAPI_LIBRARY_V2
cmsg->Globalconfiguration = Globalconfiguration;
#endif
cmsg->BC = BC;
cmsg->LLC = LLC;
cmsg->HLC = HLC;
cmsg->BChannelinformation = BChannelinformation;
cmsg->Keypadfacility = Keypadfacility;
cmsg->Useruserdata = Useruserdata;
cmsg->Facilitydataarray = Facilitydataarray;
#ifndef CAPI_LIBRARY_V2
cmsg->SendingComplete = SendingComplete;
#endif
}
static inline void capi_fill_DATA_B3_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
unsigned char *Data,
_cword DataLength,
_cword DataHandle,
_cword Flags)
{
capi_cmsg_header(cmsg, ApplId, 0x86, 0x80, Messagenumber, adr);
cmsg->Data = Data;
cmsg->DataLength = DataLength;
cmsg->DataHandle = DataHandle;
cmsg->Flags = Flags;
}
static inline void capi_fill_DISCONNECT_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct BChannelinformation,
_cstruct Keypadfacility,
_cstruct Useruserdata,
_cstruct Facilitydataarray)
{
capi_cmsg_header(cmsg, ApplId, 0x04, 0x80, Messagenumber, adr);
cmsg->BChannelinformation = BChannelinformation;
cmsg->Keypadfacility = Keypadfacility;
cmsg->Useruserdata = Useruserdata;
cmsg->Facilitydataarray = Facilitydataarray;
#ifndef CAPI_LIBRARY_V2
cmsg->SendingComplete = NULL;
#endif
}
static inline void capi_fill_DISCONNECT_B3_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct NCPI)
{
capi_cmsg_header(cmsg, ApplId, 0x84, 0x80, Messagenumber, adr);
cmsg->NCPI = NCPI;
}
static inline void capi_fill_MANUFACTURER_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cdword ManuID,
_cdword Class,
_cdword Function,
_cstruct ManuData)
{
capi_cmsg_header(cmsg, ApplId, 0xff, 0x80, Messagenumber, adr);
cmsg->ManuID = ManuID;
cmsg->Class = Class;
cmsg->Function = Function;
cmsg->ManuData = ManuData;
}
static inline void capi_fill_RESET_B3_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct NCPI)
{
capi_cmsg_header(cmsg, ApplId, 0x87, 0x80, Messagenumber, adr);
cmsg->NCPI = NCPI;
}
static inline void capi_fill_SELECT_B_PROTOCOL_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword B1protocol,
_cword B2protocol,
_cword B3protocol,
_cstruct B1configuration,
_cstruct B2configuration,
_cstruct B3configuration
#ifndef CAPI_LIBRARY_V2
,_cstruct Globalconfiguration
#endif
)
{
capi_cmsg_header(cmsg, ApplId, 0x41, 0x80, Messagenumber, adr);
cmsg->B1protocol = B1protocol;
cmsg->B2protocol = B2protocol;
cmsg->B3protocol = B3protocol;
cmsg->B1configuration = B1configuration;
cmsg->B2configuration = B2configuration;
cmsg->B3configuration = B3configuration;
#ifndef CAPI_LIBRARY_V2
cmsg->Globalconfiguration = Globalconfiguration;
#endif
}
static inline void capi_fill_CONNECT_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword Reject,
_cword B1protocol,
_cword B2protocol,
_cword B3protocol,
_cstruct B1configuration,
_cstruct B2configuration,
_cstruct B3configuration,
#ifndef CAPI_LIBRARY_V2
_cstruct Globalconfiguration,
#endif
_cstruct ConnectedNumber,
_cstruct ConnectedSubaddress,
_cstruct LLC,
_cstruct BChannelinformation,
_cstruct Keypadfacility,
_cstruct Useruserdata,
_cstruct Facilitydataarray)
{
capi_cmsg_header(cmsg, ApplId, 0x02, 0x83, Messagenumber, adr);
cmsg->Reject = Reject;
cmsg->B1protocol = B1protocol;
cmsg->B2protocol = B2protocol;
cmsg->B3protocol = B3protocol;
cmsg->B1configuration = B1configuration;
cmsg->B2configuration = B2configuration;
cmsg->B3configuration = B3configuration;
#ifndef CAPI_LIBRARY_V2
cmsg->Globalconfiguration = Globalconfiguration;
#endif
cmsg->ConnectedNumber = ConnectedNumber;
cmsg->ConnectedSubaddress = ConnectedSubaddress;
cmsg->LLC = LLC;
cmsg->BChannelinformation = BChannelinformation;
cmsg->Keypadfacility = Keypadfacility;
cmsg->Useruserdata = Useruserdata;
cmsg->Facilitydataarray = Facilitydataarray;
}
static inline void capi_fill_CONNECT_ACTIVE_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x03, 0x83, Messagenumber, adr);
}
static inline void capi_fill_CONNECT_B3_ACTIVE_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x83, 0x83, Messagenumber, adr);
}
static inline void capi_fill_CONNECT_B3_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword Reject,
_cstruct NCPI)
{
capi_cmsg_header(cmsg, ApplId, 0x82, 0x83, Messagenumber, adr);
cmsg->Reject = Reject;
cmsg->NCPI = NCPI;
}
static inline void capi_fill_CONNECT_B3_T90_ACTIVE_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x88, 0x83, Messagenumber, adr);
}
static inline void capi_fill_DATA_B3_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword DataHandle)
{
capi_cmsg_header(cmsg, ApplId, 0x86, 0x83, Messagenumber, adr);
cmsg->DataHandle = DataHandle;
}
static inline void capi_fill_DISCONNECT_B3_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x84, 0x83, Messagenumber, adr);
}
static inline void capi_fill_DISCONNECT_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x04, 0x83, Messagenumber, adr);
}
static inline void capi_fill_FACILITY_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword FacilitySelector)
{
capi_cmsg_header(cmsg, ApplId, 0x80, 0x83, Messagenumber, adr);
cmsg->FacilitySelector = FacilitySelector;
}
static inline void capi_fill_INFO_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x08, 0x83, Messagenumber, adr);
}
static inline void capi_fill_MANUFACTURER_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cdword ManuID,
_cdword Class,
_cdword Function,
_cstruct ManuData)
{
capi_cmsg_header(cmsg, ApplId, 0xff, 0x83, Messagenumber, adr);
cmsg->ManuID = ManuID;
cmsg->Class = Class;
cmsg->Function = Function;
cmsg->ManuData = ManuData;
}
static inline void capi_fill_RESET_B3_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x87, 0x83, Messagenumber, adr);
}
#ifdef __cplusplus
}
#endif
#endif /* __CAPIUTILS_H__ */
distrib
>
Mandriva
>
2011.0
>
i586
>
media
>
contrib-release-debug
>
by-pkgid
>
1fe5c2b04d52297afed366cfde605bae
>
files
>
29
