Compress::Zlib
Version 1.16
13 December 2001
Copyright (c) 1995-2001 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or
modify it under the same terms as Perl itself.
DESCRIPTION
-----------
This module provides a Perl interface to part of the info-zip zlib
compression library. For more details see the pod documentation
embedded in the file Zlib.pm.
If you have downloaded this module in the expectation of manipulating the
contents of .zip files, you will need to fetch and build the Archive::Zip
module below as well.
http://www.cpan.org/modules/by-module/Archive/Archive-Zip-*.tar.gz
PREREQUISITES
-------------
Before you can build Compress::Zlib you need to have the following
installed on your system:
* Perl 5.004 or better.
* Info-zip zlib 1.0.2 or better (note that this module is NOT
compatible with versions of zlib <= 1.0.1).
The zlib compression library is available at
http://www.gzip.org/zlib/
When building Compress::Zlib, you can optionally build the zlib
library at the same time. If you are running Windows 95/98/NT, this
seems to be the most straightforward option.
If you want Compress::Zlib to build zlib, fetch a copy of the zlib
distribution from the site mentioned above and unpack it into the
Compress::Zlib source directory. If you have fetched zlib 1.1.3, it will
create a directory called zlib-1.1.3.
Now, whether you are building zlib or not, edit the file config.in
and follow the instructions given in it.
BUILDING THE MODULE
-------------------
Assuming you have met all the prerequisites, building the module should
be relatively straightforward.
Assuming you have met all the prerequisites, the module can now be built
using this sequence of commands:
Step 1 : Edit the file config.in to suit you local installation.
Instructions are given in the file.
Step 2 : Build and test the module using this sequence of commands:
perl Makefile.PL
make
make test
INSTALLATION
------------
To install Compress::Zlib, run the command below:
make install
TROUBLESHOOTING
---------------
HP-UX
-----
I've had a report that when building Compress::Zlib under HP-UX that it is
necessary to have first built the zlib library with the -fpic option.
FEEDBACK
--------
How to report a problem with Compress::Zlib.
To help me help you, I need of the following information:
1. The version of Perl and the operating system name and version you
are running. The full output from running "perl -V" will tell me all
I need to know. If your perl doesn't understand the -V flag, then it's
too old to build this module -- you need to have Perl 5.004 or better.
2. The version of Compress::Zlib you have.
If you have successfully installed Compress::Zlib, this one-liner
will tell you:
perl -e 'use Compress::Zlib; print "ver $Compress::Zlib::VERSION\n"'
If you haven't installed Compress::Zlib then search Compress::Zlib.pm
for a line like this:
$VERSION = "1.05" ;
3. The version of zlib you have installed.
If you don't know look at the beginning of the file zlib.h.
4. If you are having problems building Compress::Zlib, send me a
complete log of what happened.
CHANGES
-------
0.1 - first alpha release. 2nd October 1995
0.2 - Fixed a minor allocation problem in Zlib.xs
0.3 - Added prototype specification.
0.4 - Upgrade to support zlib 0.99
Added dictionary interface.
Fixed bug in gzreadline - previously it would keep returning
the same buffer. This bug was reported by Helmut Jarausch
Removed dependency to zutil.h and so dropped support for
DEF_MEM_LEVEL (use MAX_MEM_LEVEL instead)
DEF_WBITS (use MAX_WBITS instead)
0.5 - Confirmed that no changes were necessary for zlib 1.0.3, or 1.0.4.
The optional parameters for deflateInit and inflateInit can now
be specified as an associative array in addition to a reference
to an associative array. They can also accept the -Name
syntax.
gzopen can now optionally take a reference to an open
filehandle in place of a filename. In this case it will call
gzdopen.
Added gzstream example script.
1.00 - 14 Nov 1997
* Fixed crc32 & adler32. They were very broken.
* The following functions can now take a scalar reference in
place of a scalar for their buffer parameters:
compress
uncompress
deflate
inflate
crc32
adler32
This should mean applications that make use of the module don't
have to copy large buffers around.
* Normally the inflate method consumes I<all> of the input buffer
before returning. The exception to this is when inflate detects
the end of the stream (Z_STREAM_END). In this case the input
buffer need not be completely consumed. To allow processing of
file formats that embed a deflation stream (e.g. zip, gzip),
the inflate method now sets the buffer parameter to be what
remains after inflation.
When the return status is Z_STREAM_END, it will be what remains
of the buffer (if any) after deflation. When the status is Z_OK
it will be an empty string.
This change means that the buffer parameter must be a lvalue.
* Fixed crc32 and adler32. They were both very broken.
* Added the Compress::Zlib::memGzip function.
1.01 - 23 Nov 1997
* A number of fixes to the test suite and the example scripts to
allow them to work under win32. All courtesy of Gurusamy
Sarathy.
1.02 - 31 Jan 1999
* The return codes for gzread, gzreadline and gzwrite were
documented incorrectly as returning a status code.
* The test harness was missing a "gzclose". This caused problem
showed up on an amiga. Thanks to Erik van Roode for reporting
this one.
* Patched zlib.t for OS/2. Thanks to Ilya Zakharevich for the patch.
1.03 - 17 Mar 1999
* Updated to use the new PL_ symbols.
Means the module can be built with Perl 5.005_5*
1.04 - 27 May 1999
* Bug 19990527.001: compress(undef) core dumps -- Fixed.
1.05 - 3 June 1999
* Previous release used newSVpvn, which doesn't exist in 5.004_04
or earlier. Changed to use newSVpv instead.
* The module needs Perl 5.004 or better, so updated the version
checking in Zlib.pm and Makefile.PL
1.06 - 20 Sep 1999
* Fixed a nasty problem where inflate could truncate the data
returned. Thanks to Douglas Thomson <dougt@mugc.cc.monash.edu.au>
for both spotting the problem and fixing the bug.
* Added a note about the undocumented features in zlib that are
required when accessing zip files.
* gzclose will now get called automatically when the gzip object is
destroyed.
1.07 - 27 Nov 1999
* ANSI-ified the static functions in Zlib.xs
* Added the ability to build zlib along with the module.
This feature is 90% based on a Makefile provided by Gurusamy
Sarathy.
1.08 - 6 Jan 2000
* uncompress was clobbering its input parameter. Now it doesn't.
This bug was spotted by Deven T. Corzine.
* If a variable that only ever contained a number was given
to compress or deflate, it would not be compressed properly. Now
it will be coerced to a string and then compressed. This bug
was spotted by Deven T. Corzine.
1.09 - 15th January 2001
* Silenced a few compiler warnings.
* Updated zlib home site in README & Zlib.pm to www.info-zip.org
* Minor typo in Zlib.pm - a link used AUTHORS instead of AUTHOR
-- spotted by Frank Martini.
* Mention Archive::Zip
* added memGunzip. This is largely based on code provided by Jim Leonard.
* $deflate->flush can now take an optional parameter. Valid
values are Z_NO_FLUSH, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, Z_FULL_FLUSH
and Z_FINISH. The default is Z_FINISH.
1.10 - 5th February 2001
* fixed a bug in memGunzip. Used Z_ERR instead of Z_DATA_ERROR.
1.11 - 17th February 2001
* Added logic in Makefile.PL to toggle between using $^W and
the warnings pragma in the module.
* The module, the examples & the test harness are now all strict
& warnings clean.
1.12 - 28th April 2001
* Modified Makefile.PL to only enable the warnings pragma if
using perl 5.6.1 or better.
1.13 - 31st June 2001
* Make sure config.in is consistant when released.
1.14 - 27th August 2001
* Memory overwrite bug fixed in "inflate". Kudos to Rob Simons for
reporting the bug and to Anton Berezin for fixing it for me.
1.15 - 4th December 2001
* Changes a few types to get the module to build on 64-bit Solaris
* Changed the up/downgrade logic to default to the older constructs, and
to only call a downgrade if specifically requested. Some older versions
of Perl were having problems with the in-place edit.
* added the new XS constant code.
1.16 - 13 December 2001
* Fixed bug in Makefile.PL that stopped "perl Makefile.PL PREFIX=..."
working.
Paul Marquess <Paul.Marquess@btinternet.com>
