Kernel driver `fscscy.o'
======================
Status: Beta
Tested with motherboard D1230
Should also work with D1204, D1306 and D1307
Think twice before you're using the write mode of some
variables, especially the watchdog (Not my comment, but it makes
good sense to observe :-)
Supported chips:
* Fujitsu Siemens Scylla chip
Prefix `fscscy'
Addresses scanned: I2C 0x73
Author: Martin Knoblauch <mkn@teraport.de>
Acknowledgement:
This code has been greatly inspired by Hermann Jung <hej@odn.de>
and his work on the Poseidon driver (fscpos)
Module Parameters
-----------------
* force: short array (min = 1, max = 48)
List of adapter,address pairs to boldly assume to be present
* ignore: short array (min = 1, max = 48)
List of adapter,address pairs not to scan
* ignore_range: short array (min = 1, max = 48)
List of adapter,start-addr,end-addr triples not to scan
* probe: short array (min = 1, max = 48)
List of adapter,address pairs to scan additionally
* probe_range: short array (min = 1, max = 48)
List of adapter,start-addr,end-addr triples to scan additionally
Description
-----------
This driver implements support for the Fujitsu Siemens Scylla chip.
The code is based on the "fscpos" driver for the FSC Poseidon chip.
In fact, it seems the Scylla is a superset of the "Poseidon", "Poseidon II"
and "Hydra" chips.
The register readings/setting have been deduced from the 'Register Set
Specification BMC Poseidon based Systemboard' by Fujitsu Siemens and the
"sbbmon.ini" file from the Fujitsu-Siemens ServerView software.
The scylla chip implements a hardware based system management,
e.g. for controlling fan speed and core voltage.
There is also a watchdog counter on the chip which can trigger
an alarm and even shutdown the system.
The chip provides four temperature values (cpu0/1, motherboard and auxiliary),
three current values (12 volt, 5 volt and battery) and up to
six fans (power supply, cpu and auxiliary).
Temperatures are measured in degrees Celcius. The resolution is 1 degree.
In addition to state and actual temperature, the temperature sensors also export
a LIMIT temperature for each sensor. The meaning of the information itself is
obvious. The rest is guesswork. It likely triggers an alarm/event as soon as it is
reached. The authors feeling is that it is even a writeable register. But beeing of
the cautios kind he did not implement writing the LIMIT resister. The driver itself
keeps track of the minimum and maximum temperatures since module load. The more often
the module is accessed, the more meaningful these values are.
FAN rotation speeds are reported in RPM (rotations per minute).
The value can be divided by a programmable divider (1, 2, 4 or 8) which
is stored on the chip.
Voltage sensors (also known as IN sensors) report their values in volts.
All values are reported as final values from the driver.
There is no need for further calculations.
Chip Features
-------------
Chip `fscscy'
LABEL LABEL CLASS COMPUTE CLASS ACCESS MAGNITUDE
rev NONE NONE R 0
event NONE NONE R 0
control NONE NONE RW 0
volt12 NONE NONE R 2
volt5 NONE NONE R 2
voltbatt NONE NONE R 2
temp1 NONE NONE R 0
temp2 NONE NONE R 0
temp3 NONE NONE R 0
temp4 NONE NONE R 0
temp1_state temp1 temp1 RW 0
temp2_state temp2 temp2 RW 0
temp3_state temp3 temp3 RW 0
temp4_state temp4 temp4 RW 0
temp1_lim temp1 temp1 R* 0
temp2_lim temp2 temp2 R* 0
temp3_lim temp3 temp3 R* 0
temp4_lim temp4 temp4 R* 0
temp1_min temp1 temp1 R 0
temp2_min temp2 temp2 R 0
temp3_min temp3 temp3 R 0
temp4_min temp4 temp4 R 0
temp1_max temp1 temp1 R 0
temp2_max temp2 temp2 R 0
temp3_max temp3 temp3 R 0
temp4_max temp4 temp4 R 0
fan1 NONE NONE R 0
fan2 NONE NONE R 0
fan3 NONE NONE R 0
fan4 NONE NONE R 0
fan5 NONE NONE R 0
fan6 NONE NONE R 0
fan1_min fan1 fan1 RW 0
fan2_min fan2 fan2 RW 0
fan3_min fan3 fan3 RW 0
fan4_min fan4 fan4 RW 0
fan5_min fan5 fan5 RW 0
fan6_min fan6 fan6 RW 0
fan1_state fan1 fan1 RW 0
fan2_state fan2 fan2 RW 0
fan3_state fan3 fan3 RW 0
fan4_state fan4 fan4 RW 0
fan5_state fan5 fan5 RW 0
fan6_state fan6 fan6 RW 0
fan1_ripple fan1 fan1 RW 0
fan2_ripple fan2 fan2 RW 0
fan3_ripple fan3 fan3 RW 0
fan4_ripple fan4 fan4 RW 0
fan5_ripple fan5 fan5 RW 0
fan6_ripple fan6 fan6 RW 0
wdog_preset NONE NONE RW 0
wdog_state wdog_preset wdog_preset RW 0
wdog_control wdog_preset wdog_preset RW 0
R*: Maybe writable, but due to lack of documentation the author did not dare
to implement it :-)
LABEL FEATURE SYMBOL SYSCTL FILE:OFFSET
rev FSCSCY_SYSCTL_REV rev:1
event FSCSCY_SYSCTL_EVENT event:1
control FSCSCY_SYSCTL_CONTROL control:1
volt12 FSCSCY_SYSCTL_VOLTAGE1 volt0:1
volt5 FSCSCY_SYSCTL_VOLTAGE2 volt1:1
voltbatt FSCSCY_SYSCTL_VOLTAGE3 volt2:1
temp1 FSCSCY_SYSCTL_TEMP1 temp0:2
temp2 FSCSCY_SYSCTL_TEMP2 temp1:2
temp3 FSCSCY_SYSCTL_TEMP3 temp2:2
temp4 FSCSCY_SYSCTL_TEMP4 temp3:2
temp1_state FSCSCY_SYSCTL_TEMP1_STATE temp0:1
temp2_state FSCSCY_SYSCTL_TEMP2_STATE temp1:1
temp3_state FSCSCY_SYSCTL_TEMP3_STATE temp2:1
temp4_state FSCSCY_SYSCTL_TEMP4_STATE temp3:1
temp1_lim FSCSCY_SYSCTL_TEMP1_LIM temp0:3
temp2_lim FSCSCY_SYSCTL_TEMP2_LIM temp1:3
temp3_lim FSCSCY_SYSCTL_TEMP3_LIM temp2:3
temp4_lim FSCSCY_SYSCTL_TEMP4_LIM temp3:3
temp1_min FSCSCY_SYSCTL_TEMP1_MIN temp0:4
temp2_min FSCSCY_SYSCTL_TEMP2_MIN temp1:4
temp3_min FSCSCY_SYSCTL_TEMP3_MIN temp2:4
temp4_min FSCSCY_SYSCTL_TEMP4_MIN temp3:4
temp1_max FSCSCY_SYSCTL_TEMP1_MIN temp0:5
temp2_max FSCSCY_SYSCTL_TEMP2_MIN temp1:5
temp3_max FSCSCY_SYSCTL_TEMP3_MIN temp2:5
temp4_max FSCSCY_SYSCTL_TEMP4_MIN temp3:5
fan1 FSCSCY_SYSCTL_FAN1 fan0:4
fan2 FSCSCY_SYSCTL_FAN2 fan1:4
fan3 FSCSCY_SYSCTL_FAN3 fan2:4
fan4 FSCSCY_SYSCTL_FAN4 fan3:4
fan5 FSCSCY_SYSCTL_FAN5 fan4:4
fan6 FSCSCY_SYSCTL_FAN6 fan5:4
fan1_min FSCSCY_SYSCTL_FAN1_MIN fan0:2
fan2_min FSCSCY_SYSCTL_FAN2_MIN fan1:2
fan3_min FSCSCY_SYSCTL_FAN3_MIN fan2:2
fan4_min FSCSCY_SYSCTL_FAN4_MIN fan3:2
fan5_min FSCSCY_SYSCTL_FAN5_MIN fan4:2
fan6_min FSCSCY_SYSCTL_FAN6_MIN fan5:2
fan1_state FSCSCY_SYSCTL_FAN1_STATE fan0:1
fan2_state FSCSCY_SYSCTL_FAN2_STATE fan1:1
fan3_state FSCSCY_SYSCTL_FAN3_STATE fan2:1
fan4_state FSCSCY_SYSCTL_FAN4_STATE fan3:1
fan5_state FSCSCY_SYSCTL_FAN5_STATE fan4:1
fan6_state FSCSCY_SYSCTL_FAN6_STATE fan5:1
fan1_ripple FSCSCY_SYSCTL_FAN1_RIPPLE fan0:3
fan2_ripple FSCSCY_SYSCTL_FAN2_RIPPLE fan1:3
fan3_ripple FSCSCY_SYSCTL_FAN3_RIPPLE fan2:3
fan4_ripple FSCSCY_SYSCTL_FAN3_RIPPLE fan3:3
fan5_ripple FSCSCY_SYSCTL_FAN3_RIPPLE fan4:3
fan6_ripple FSCSCY_SYSCTL_FAN3_RIPPLE fan5:3
wdog_preset FSCSCY_SYSCTL_WDOG_PRESET wdog:1
wdog_state FSCSCY_SYSCTL_WDOG_STATE wdog:2
wdog_control FSCSCY_SYSCTL_WDOG_CONTROL wdog:3
