# wmsmixer - A mixer designed for WindowMaker with scrollwheel support
# Copyright (C) 2001  Damian Kramer <psiren@hibernaculum.demon.co.uk>
# Copyright (C) 1998  Sam Hawker <shawkie@geocities.com>
# This software comes with ABSOLUTELY NO WARRANTY
# This software is free software, and you are welcome to redistribute it
# under certain conditions
# See the README file for a more complete notice.

# User config file
# Should be saved as ~/.wmsmixer
# Comments and blank lines mostly allowed

# The format of this file is a series of commands:

# addchannel %i
#    Adds a channel to the sequence. %i specifies a channel.
#    These are the values from my <linux/soundcard.h>:
#
#    SOUND_MIXER_VOLUME		0
#    SOUND_MIXER_BASS		1
#    SOUND_MIXER_TREBLE		2
#    SOUND_MIXER_SYNTH		3
#    SOUND_MIXER_PCM		4
#    SOUND_MIXER_SPEAKER	5
#    SOUND_MIXER_LINE		6
#    SOUND_MIXER_MIC		7
#    SOUND_MIXER_CD		8
#    SOUND_MIXER_IMIX		9	/*  Recording monitor  */
#    SOUND_MIXER_ALTPCM		10
#    SOUND_MIXER_RECLEV		11	/* Recording level */
#    SOUND_MIXER_IGAIN		12	/* Input gain */
#    SOUND_MIXER_OGAIN		13	/* Output gain */
#    SOUND_MIXER_LINE1		14	/* Input source 1  (aux1) */
#    SOUND_MIXER_LINE2		15	/* Input source 2  (aux2) */
#    SOUND_MIXER_LINE3		16	/* Input source 3  (line) */
#    SOUND_MIXER_DIGITAL1	17	/* Digital (input) 1 */
#    SOUND_MIXER_DIGITAL2	18	/* Digital (input) 2 */
#    SOUND_MIXER_DIGITAL3	19	/* Digital (input) 3 */
#    SOUND_MIXER_PHONEIN	20	/* Phone input */
#    SOUND_MIXER_PHONEOUT	21	/* Phone output */
#    SOUND_MIXER_VIDEO		22	/* Video/TV (audio) in */
#    SOUND_MIXER_RADIO		23	/* Radio in */
#    SOUND_MIXER_MONITOR	24	/* Monitor (usually mic) volume */
#
#    Ths channel added becomes the current channel for subsequent
#    setmono, setleft, setright and setname commands.

# setchannel %i
#    Similar to addchannel, except the channel is not actually added
#    to the sequence, merely made the current channel for subsequent
#    setmono, setleft, setright and setname commands.

# setmono %i
#    Sets both left and right volumes for the current channel.
#    The channel may be mono or stereo.
#    The value specified must be an integer in the range 0 to 100.

# setleft %i
#    Sets left volume for the current channel.
#    Do not use on a mono channel.
#    The value specified must be an integer in the range 0 to 100.

# setright %i
#    Sets right volume for the current channel.
#    Do not use on a mono channel.
#    The value specified must be an integer in the range 0 to 100.

# setname <text>
#    Set the name for this channel. This will be displayed briefly
#    when you switch to this channel, or when you click on the
#    icon. The program will only use the first 4 characters of this
#    text.

# At least one channel must be added!

# VOLUME
addchannel 0
setmono 90
setname main

# PCM
addchannel 4
setmono 64

# SPEAKER
addchannel 5
setmono 0

# LINE
addchannel 6
setmono 0

# MIC
addchannel 7
setmono 0

# CD
addchannel 8
setmono 90

# RECLEVEL
addchannel 11      
setmono 0

# OGAIN
addchannel 13
setmono 0

# LINE1
addchannel 14
setmono 0

# LINE2
addchannel 15
setmono 100

# DIGITAL1
addchannel 17
setmono 0

# PHONEIN
addchannel 20
setmono 0