------------------------ AUTHENTICATION MODULES ------------------------


Since release 1.0.8, anyone can add new custom authentication methods to
Pure-FTPd without recompiling anything, using "authentication modules".

To enable it, you must ./configure with --with-extauth, or
--with-everything. Linux binary packages have it enabled by default.

Here's how they are working :

1) A client connects to the FTP server and issues a login/password pair.

2) The FTP server connects to a local separate daemon, called 'pure-authd'.
Data transmitted to that daemon is : user's login, user's password, the IP
address that user connected to, the local port that user connected to, and
the user's remote IP address.

3) pure-authd spawns an authentication program. It can be anything,
including a shell script. The program is given the collected info (login,
password, IP addresses, etc.) as environment variables.

4) The authentication program replies (to the standard output) with the
user's home directory, quota, ratio, bandwidth, and if authentication was
successful or not.

5) pure-authd relays this info to pure-ftpd.

This method is a bit slower than built-in authentication methods. But it's
very flexible as anyone can easily write his own authentication programs.
And they can run non-root, chrooted, with limited capabilities, etc.

Communication between pure-ftpd and pure-authd is done through a local Unix
socket. It's recommended to put that socket in a directory where non-trusted
users have no write access to.

Authentication programs can read the following environment variables to get
info about the user trying to authenticate :

AUTHD_ACCOUNT
AUTHD_PASSWORD
AUTHD_LOCAL_IP
AUTHD_LOCAL_PORT
AUTHD_REMOTE_IP

They are self-explanatory. Previous global environment variables aren't
cleared when the script is called.

The program must respond on the standard output with lines like :

auth_ok:1
uid:42
gid:21
dir:/home/j
end

Note the final 'end' keyword. It's mandatory.

Here's the list of recognized tokens ('xxx' has of course to be filled) :

* auth_ok:xxx

If xxx is 0, the user was not found (the next authentication method passed
to pure\-ftpd will be tried) . If xxx is \-1, the user was found, but there
was a fatal authentication error : user is root, password is wrong, account
has expired, etc (next authentication methods will not be tried) . If xxx is
1, the user was found and successfully authenticated.
 
* uid:xxx

The system uid to be assigned to that user. Must be > 0.
 
* gid:xxx

The primary system gid. Must be > 0.
 
* dir:xxx

The absolute path to the home directory. Can contain /./ for a chroot jail.
 
*slow_tilde_expansion:xxx (optional, default is 1)

When the command 'cd ~user' is issued, it's handy to go to that user's home
directory, as expected in a shell environment. But fetching account info can
be an expensive operation for non\-system accounts. If xxx is 0, 'cd ~user'
will expand to the system user home directory. If xxx is 1, 'cd ~user' won't
expand. You should use 1 in most cases with external authentication, when
your FTP users don't match system users. You can also set xxx to 1 if you're
using slow nss_* system authentication modules.
 
* throttling_bandwidth_ul:xxx (optional)

The allocated bandwidth for uploads, in bytes per second.
 
* throttling_bandwidth_dl:xxx (optional)

The allocated bandwidth for downloads, in bytes per second.
 
*user_quota_size:xxx (optional)

The maximal total size for this account, in bytes.
 
* user_quota_files:xxx (optional)

The maximal number of files for this account.
 
* ratio_upload:xxx and radio_download:xxx (optional)

The user must match a ratio_upload:ratio_download ratio.


          ------------------------ EXAMPLE ------------------------
          
          
Here's a very basic example. Our sample authentication program will only
accept user 'john' with any password, and return a fixed home directory and
uid/gid.

#! /bin/sh

if test "$AUTHD_ACCOUNT" = "john"; then
  echo 'auth_ok:1'
  echo 'uid:69'
  echo 'gid:42'
  echo 'dir:/tmp'
  echo 'end'
else
  echo 'auth_ok:0'
fi

Let's say we save this file as /usr/bin/ftp-auth-handler

Now, we have to run pure-authd and pure-ftpd, to connect them through a
local socket and to tell pure-ftpd to use our external authentication module :

pure-authd        -s /var/run/ftpd.sock -r /usr/bin/ftp-auth-handler &
pure-ftpd  -lextauth:/var/run/ftpd.sock &

That's all. Now, we can only log in as 'john', as all FTP authentication is
done by the shell script.