<chapter id="tutorial">
<title>Step by Step Tutorial</title>
<para>This section is a step by step
walk through of the most important functions needed to understand how
to create and manipulate a complex document. This tutorial will generate the start of a
newsletter as an example document. </para>

<para>It is recommend that you go through the tutorial in order at
least once if you are new to frame based word processors.</para>

<sect1 id="choose-template">
<title>Tutorial: Choosing the initial template</title>

<note><para>The steps to this tutorial are numbered from 1 to 22.
Beneath each step, is text in <emphasis>italics</emphasis>. This text
will explain what the previous step in the tutorial accomplished.</para></note>

<para>When you first <link linkend="starting-kword">start &kword;</link> (or <link linkend="new-doc">start a new
document</link> after &kword; is running), a dialog appears.</para>

<mediaobject>
<imageobject>
<imagedata format="PNG" fileref="ChooseTempDia.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject>
</mediaobject>

<para><emphasis>This dialog box is used to:</emphasis></para>
<orderedlist numeration="arabic">
<listitem>
<para><emphasis>Select the initial template for your new
document</emphasis></para>
</listitem>
<listitem>
<para><emphasis>Open a &kword; Document saved to your hard
drive or network.</emphasis></para>
</listitem>
<listitem>
<para><emphasis>Start &kword; without any document
started.</emphasis></para>
</listitem>
</orderedlist>

<para>Step 1: Click on the <guilabel>Page Layout</guilabel> tab.</para>

<mediaobject><imageobject><imagedata format="PNG"
fileref="Tut1.png"/></imageobject><textobject><phrase>Screen shot</phrase></textobject></mediaobject>

<para><emphasis>This will list the Page Layout templates available on
your system. For information on the differences between Page Layout and Text Oriented templates, see the section entitled 
<link linkend="wp-vs-dtp">The difference between Text Oriented and Page Layout
templates</link>.</emphasis></para>

<para>Step 2: Now select the <guilabel>Simple Layout</guilabel> icon by
clicking once with the left button of your mouse.</para>

<mediaobject><imageobject><imagedata format="PNG"
fileref="Tut2.png"/></imageobject><textobject><phrase>Screen shot</phrase></textobject></mediaobject>

<para><emphasis>This is the template we will use for the
tutorial</emphasis></para>

<para>Step 3: Now confirm your selection by clicking on
<guibutton>OK</guibutton> </para>

<mediaobject><imageobject><imagedata format="PNG" fileref="Tut3.png"
align="center"/></imageobject><textobject><phrase>Screen shot</phrase></textobject></mediaobject>

<para><emphasis>To complete your selection</emphasis></para>

<para><emphasis>&kword; will open a new document with three frames. The
frames are outlined on the white background, as gray boxes. Each box is
a separate frame.</emphasis></para>

</sect1>

<sect1 id="tutorial-frame-select">
<title>Tutorial: Selecting a frame and entering text into that frame</title>

<para><emphasis>To begin entering text (or adding any sort of data for
that matter) into a document, its important to let &kword; know which
frame to put the data in.</emphasis></para>

<note>
<para>In order to keep both editing and formatting of your document efficient and simple,
the command executed with a mouse click changes depending on where in the &kword; window the pointer
is located.</para>

<para>When the pointer is located over toolbars, scrollbars, menu buttons or other areas
<emphasis>outside the document</emphasis>, the pointer is an arrow. You should already be
familiar with this type of pointer when using other &kde; programs. </para>
<para>When <emphasis>inside the document</emphasis>, there are two separate pointers which alternate automatically
based on how close to a frame edge the pointer is currently located.</para>
<para>When the mouse pointer is near the edge of a frame, the pointer will change into two intersecting lines
with arrows on all four points.  Clicking the left mouse button now will select the nearest frame.  </para>
<para>As you move the pointer away from the edge of the frame, the pointer will change into the text entry pointer.
Clicking the left mouse button at this time will tell &kword; to insert text into this frame.</para>
</note>


<para>Step 4: Place the mouse pointer over the upper-left frame.  
Make sure you do not see the <emphasis>frame select pointer</emphasis></para>
<para>Step 5: Click once with the left mouse button.</para>

<mediaobject><imageobject><imagedata format="PNG"
fileref="Tut4.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject>

<para><emphasis>This tells &kword; to insert text into this frame.  A cursor appears in the upper left
corner of the frame. </emphasis></para>

<para>Step 6: Enter the following text into the keyboard: <userinput>KWord Press Release</userinput>.</para>

<para><emphasis>This is some sample text for our
newsletter.</emphasis></para>

<para>Step 7: Select <emphasis>KWord Press Release</emphasis> by placing
the mouse cursor on the right end of the text.  Click once with the
&LMB; and drag the mouse cursor
to the left..  Selected text will be white text on dark
background.  When all the text has been selected, release the &LMB;.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut7.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>
<para><emphasis>This defines what text is going to be altered with Step 8.</emphasis></para>
<para>Step 8: Click inside the text size drop down box.  Change this
number to 26.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut8.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para><emphasis>This changes the size of the selected text to one more
appropriate for a title.</emphasis></para>

</sect1>

<sect1 id="tutorial-resize-frame"> <title>Tutorial: Changing the size of a frame</title>

<para><emphasis>Now that we have entered some text, we can see that the
frame should extend across the entire width of the page for a title.  We need to change
the size and shape of the frame. </emphasis></para>

<para>Step 9: Place the mouse pointer over the frame border (you will notice the cursor
changes to two intersecting lines with arrows), and click
once with the &LMB;.</para>

<para><emphasis>This will select this frame, so it can be
re-shaped.</emphasis></para>

<para><emphasis>You will now notice the frame is outlined in black, with
8 dark squares on the outline.  These squares are used for re-sizing the
frame.</emphasis></para>

<para>Step 10: Place the mouse pointer over the dark square in the lower
right corner of the frame. Click with the left mouse button and hold it
down. Drag the mouse up and to the right.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut11a.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para><emphasis>Notice how the frame changes shape.  Adjust the size and
shape of the frame until it looks similar to the example below:</emphasis></para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut11b.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para>When it does, release the mouse button.</para>

</sect1>

<sect1 id="tutorial-move-frame"> 
<title>Tutorial: Moving a frame on the page</title>

<para>Now that we have created a title block, we will center it at the
top of the page.</para>

<para>Step 11: Place the mouse pointer over the border of the frame (but
not on any of the dark squares).</para>

<para><emphasis>The pointer will now change to a 4 way arrow.  This
indicates &kword; is ready to move the frame on the
page.</emphasis></para>

<para>Step 12: Click and hold with the left mouse button. Drag the
mouse, and the frame will follow it.  Position the frame in the center
of the page near the top. When you are satisfied with its final
location, release the mouse button.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut13.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

</sect1>

<sect1 id="tutorial-add-frame"> 
<title>Tutorial: Adding a new frame/Making text flow between two frames</title>
<para>Now we will add a new text frame for our first story.</para>
<para>Step 13: Begin by selecting
<menuchoice><guimenu>Insert</guimenu><guimenuitem>Text
Frame</guimenuitem></menuchoice></para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut14.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para><emphasis>The pointer has changed to cross-hairs.  You can draw
your new text box with this cursor.  Start by placing the pointer at one
corner.  Click and hold the <mousebutton>left</mousebutton> mouse
button.  Drag the mouse diagonally.  An outline will appear which
represents your new text frame.  When you have a text frame of
reasonable size, release the <mousebutton>left</mousebutton> mouse
button.</emphasis></para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut14a.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para><emphasis>It is not important if your text box does not resemble
the example for the purposes of this tutorial.</emphasis></para>

<para><emphasis>When you release the <mousebutton>left</mousebutton>
mouse button, a new dialog box appears.</emphasis></para>


<para><emphasis>This dialog box lists all the current frame sets.  The
default value is highlighted.  By selecting the default value, you will
create a new frame set (text will not flow from any other frame into this
frame)</emphasis></para>

<para><emphasis>Notice that the default name for this frameset is <guilabel>
Text Frameset 3</guilabel></emphasis></para>

<para>Step 14: For the purposes of this tutorial, the default value of
<guilabel>Create new frameset with this frame</guilabel> is good.  Simply select
<guibutton>OK</guibutton>.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut15.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para><emphasis>Now you can see your new frame has been created. It is called
<guilabel>Text Frameset 3</guilabel></emphasis></para>

<para><emphasis>Now we are going to create another small frame right next to this one.</emphasis></para>

<para>Step 15: Select <menuchoice><guimenu>Insert</guimenu><guimenuitem>Text
Frame</guimenuitem></menuchoice></para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut14.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para>Again using the crosshair pointer, draw another small frame near the first one.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut14b.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para>A dialog box will appear.</para>

<para>Step 16: Select <guilabel>Text Frameset 3</guilabel> using your mouse.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut15b.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para>Step 17: Select <guibutton>OK</guibutton>.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut16.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para><emphasis>What you have just done, is connect this new textframe, to the last frame you created.
  To test this:</emphasis></para>

<para>Step 18: Click once inside the new frame with the &LMB;.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut18.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para><emphasis>Notice that your cursor immediately jumps to the frame
to the left.  That is because the left frame is the first frame in the current frameset.</emphasis></para>

<para>Step 19: Begin typing.  You will need to type quite a bit, but
keep typing.  When you run out of space in the text frame, you will see
your new text is moved immediately into your new text frame.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut19.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

</sect1>

<sect1 id="tutorial-del-frame"> 
<title>Tutorial: Deleting a frame</title>

<para>Now we will delete an unneeded frame. (Yes, we just created
a new frame, but &kword; will forgive an indecisive user.).  We will delete
the long text frame on the right side of the page.</para>

<para>Step 20: Place the mouse pointer over the frame border of the right
hand text frame (Remember: watch for the pointer to change), and click with the &LMB;.</para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut21.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para><emphasis>This selects the frame.</emphasis></para>

<para>Step 21: Select
<menuchoice><guimenu>Frames</guimenu><guimenuitem>Delete
Frame</guimenuitem></menuchoice></para>

<para><mediaobject><imageobject><imagedata format="PNG"
fileref="Tut22.png"/></imageobject>
<textobject><phrase>Screen shot</phrase></textobject></mediaobject></para>

<para><emphasis>A small dialog box appears, checking you really intended to delete this frame.</emphasis></para>
<para>Step 22: Select <guibutton>Delete</guibutton>.</para>

<para><emphasis>This deletes the frame.</emphasis></para>

</sect1>
<sect1 id="tutorial-summary">
<title>Tutorial: Summary</title>

<para>Hopefully this tutorial has introduced you to the most basic tasks in &kword;.</para>

<para>At this point, you have :</para>

<itemizedlist>
<listitem><para>Added text to a frame.</para></listitem>
<listitem><para>Resized text.</para></listitem>
<listitem><para>Created, moved, resized and deleted frames.</para></listitem>
</itemizedlist>
<para>The purpose of this tutorial was not to explore every aspect of &kword;, but to
introduce you to the bare essentials.  Hopefully you understand the basic manipulation
of frames.  From this point, you can refer to the specific sections of the manual for
help, tips and advanced features of &kword;.</para>
</sect1>
</chapter>