# /etc/ppp/options # Default options for pppd. More options can be specified at the startup # of pppd or in the peers file. # # use the modem control lines modem # Use uucp style locks to ensure exclusive access to the serial device # Please, don't forget the 'lock' option or some programs such as mgetty # will not work. lock # use hardware flow control crtscts # create a default route for this connection in the routing table defaultroute # use a maximum transmission packet size of 1500 bytes mtu 1500 # use a maximum receive packet size of 552 bytes #mru 552 # # debug all control sequences. You need the entry daemon.debug # in /etc/syslog.conf debug # # Run the executable or shell command specified after pppd has # terminated the link. This script could, for example, issue commands # to the modem to cause it to hang up if hardware modem control signals # were not available. ath0 terminates the connection. # This option is not necessary if the options crtscts and modem # are used above. #disconnect "chat -- \d+++\d\c OK ath0 OK" #-------END