# Generated automatically from Makefile.in by configure.
# ------------------------------------------------------------
# SWIG Examples Makefile
#
# This file is used by the examples to build modules. Assuming
# you ran configure, this file will probably work. However,
# it's not perfect so you might need to do some hand tweaking.
#
# Other notes:
#
# 1. Take a look at the prefixes below. Since SWIG works with
# multiple target languages, you may need to find out where
# certain packages have been installed. Set the prefixes
# accordingly.
#
# 2. To use this makefile, simply set SRCS, INTERFACE, INCLUDE, LIBS,
# TARGET, and do a
# $(MAKE) -f Makefile.template.in SRCS='$(SRCS)' \
# INCLUDE='$(INCLUDE) LIBS='$(LIBS)' INTERFACE='$(INTERFACE)' \
# TARGET='$(TARGET)' method
#
# 'method' describes what is being built.
#---------------------------------------------------------------
TARGET =
CC = gcc
CXX = c++
CFLAGS =
prefix = /usr
exec_prefix= /usr
SRCS =
INCLUDE =
LIBS =
INTERFACE =
SWIGOPT =
SWIG = swig
RUNTIMEDIR = $(exec_prefix)/lib
LIBM = -lieee -lm
LIBC =
LIBCRYPT = -lcrypt
SYSLIBS = $(LIBM) $(LIBC) $(LIBCRYPT)
libtool_comp = $(TOP)/../Tools/libtool --mode compile
libtool_link = $(TOP)/../Tools/libtool --mode link
# X11 options
XLIB = -L/usr/X11R6/lib -lX11
XINCLUDE = -I/usr/X11R6/include
IWRAP = $(INTERFACE:.i=_wrap.i)
ISRCS = $(IWRAP:.i=.c)
ICXXSRCS = $(IWRAP:.i=.cxx)
IOBJS = $(IWRAP:.i=.o)
##################################################################
# Dynamic loading for C++
# If you are going to be building dynamic loadable modules in C++,
# you may need to edit this line appropriately.
#
# This line works for g++, but I'm not sure what it might be
# for other C++ compilers
##################################################################
CPP_DLLIBS = #-L/usr/local/lib/gcc-lib/sparc-sun-solaris2.5.1/2.7.2 \
-L/usr/local/lib -lg++ -lstdc++ -lgcc
# Solaris workshop 5.0
# CPP_DLLIBS = -L/opt/SUNWspro/lib -lCrun
# Symbols used for using shared libraries
SO= .so
LDSHARED= gcc -shared
CCSHARED= -fpic
CXXSHARED= gcc -shared
# This is used for building shared libraries with a number of C++
# compilers. If it doesn't work, comment it out.
CXXSHARED= c++ -shared
OBJS = $(SRCS:.c=.o) $(CXXSRCS:.cxx=.o)
##################################################################
##### Tcl/Tk ######
##################################################################
# Set these to your local copy of Tcl/Tk.
TCL_INCLUDE = -I/usr/include
TCL_LIB = -L/usr/lib -ltcl8.3${TCL_DBGX}
TCL_OPTS = -ldl
TK_OPTS = -ltk -ltcl -ldl
# -----------------------------------------------------------
# Build a new version of the tclsh shell
# -----------------------------------------------------------
tclsh: $(SRCS)
$(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) -ltclsh.i $(INTERFACE)
$(CC) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(TCL_INCLUDE) \
$(TCL_LIB) $(TCL_OPTS) $(LIBS) $(SYSLIBS) -o $(TARGET)
tclsh_cpp: $(SRCS)
$(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) -ltclsh.i $(INTERFACE)
$(CXX) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(TCL_INCLUDE) \
$(TCL_LIB) $(TCL_OPTS) $(LIBS) $(SYSLIBS) -o $(TARGET)
# -----------------------------------------------------------
# Build a new copy of wish
# -----------------------------------------------------------
wish: $(SRCS)
$(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) -lwish.i $(INTERFACE)
$(CC) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(TCL_INCLUDE) \
$(XINCLUDE) $(TCL_LIB) $(TK_OPTS) $(XLIB) $(LIBS) $(SYSLIBS) -o $(TARGET)
wish_cpp: $(SRCS)
$(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) -lwish.i $(INTERFACE)
$(CXX) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(TCL_INCLUDE) \
$(XINCLUDE) $(TCL_LIB) $(TK_OPTS) $(XLIB) $(LIBS) $(SYSLIBS) -o $(TARGET)
# -----------------------------------------------------------
# Build a Tcl dynamic loadable module (you might need to tweak this)
# -----------------------------------------------------------
tcl: $(SRCS)
$(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(TCL_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) -o $(TARGET)$(SO)
# -----------------------------------------------------------
# Build a Tcl7.5 dynamic loadable module for C++
# -----------------------------------------------------------
tcl_cpp: $(SRCS)
$(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(TCL_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)$(SO)
# -----------------------------------------------------------
# Build a Tcl7.5 dynamic loadable module, linked against SWIG runtime lib
# -----------------------------------------------------------
TCL_RUNTIME=-L$(RUNTIMEDIR) -lswigtcl8
tcl_multi: $(SRCS)
$(SWIG) -c -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(TCL_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) $(TCL_RUNTIME) -o $(TARGET)$(SO)
tcl_multi_cpp: $(SRCS)
$(SWIG) -c -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(TCL_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(TCL_RUNTIME) $(CPP_DLLIBS) -o $(TARGET)$(SO)
##################################################################
##### PERL 5 ######
##################################################################
# You need to set this variable to the Perl5 directory containing the
# files "perl.h", "EXTERN.h" and "XSUB.h". With Perl5.003, it's
# usually something like /usr/local/lib/perl5/arch-osname/5.003/CORE.
PERL5_INCLUDE= /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE
# ----------------------------------------------------------------
# Build a Perl5 dynamically loadable module (C)
# ----------------------------------------------------------------
perl5: $(SRCS)
$(SWIG) -perl5 $(SWIGOPT) $(INTERFACE)
$(CC) -c -Dbool=char $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) -I$(PERL5_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) -o $(TARGET)$(SO)
# ----------------------------------------------------------------
# Build a Perl5 dynamically loadable module (C++)
# ----------------------------------------------------------------
perl5_cpp: $(SRCS)
$(SWIG) -perl5 -c++ $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) -Dexplicit= $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) -I$(PERL5_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)$(SO)
# ----------------------------------------------------------------
# Build a Perl5 dynamically loadable module, linked against SWIG runtime lib
# ----------------------------------------------------------------
PERL5_RUNTIME=-L$(RUNTIMEDIR) -lswigpl
perl5_multi: $(SRCS)
$(SWIG) -c -perl5 $(SWIGOPT) $(INTERFACE)
$(CC) -c -Dbool=char $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) -I$(PERL5_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) $(PERL5_RUNTIME) -o $(TARGET)$(SO)
perl5_multi_cpp: $(SRCS)
$(SWIG) -c -perl5 -c++ $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) -Dexplicit= $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) -I$(PERL5_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(PERL5_RUNTIME) $(CPP_DLLIBS) -o $(TARGET)$(SO)
# ----------------------------------------------------------------
# Build a module from existing XS C source code. (ie. from xsubpp).
# ----------------------------------------------------------------
perl5_xs: $(SRCS)
$(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(INCLUDE) -I$(PERL5_INCLUDE)
$(LDSHARED) $(OBJS) $(LIBS) -o $(TARGET)$(SO)
# ----------------------------------------------------------------
# Build a statically linked Perl5 executable
# ----------------------------------------------------------------
PERL5_LIB = -L$(PERL5_INCLUDE) -lperl -ldl $(SYSLIBS)
perl5_static: $(SRCS)
$(SWIG) -perl5 -static -lperlmain.i $(SWIGOPT) $(INTERFACE)
$(CC) $(CFLAGS) -Dbool=char $(SRCS) $(ISRCS) $(INCLUDE) -I$(PERL5_INCLUDE) $(PERL5_LIB) $(LIBS) -o $(TARGET)
perl5_static_cpp: $(SRCS)
$(SWIG) -perl5 -c++ -static -lperlmain.i $(SWIGOPT) $(INTERFACE)
$(CXX) $(CFLAGS) -Dexplicit= $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) -I$(PERL5_INCLUDE) $(PERL5_LIB) $(LIBS) -o $(TARGET)
##################################################################
##### PYTHON ######
##################################################################
# Make sure these locate your Python installation
PYTHON_INCLUDE= -DHAVE_CONFIG_H -I/usr/include/python2.2 -I/usr/lib/python2.2/config
PYTHON_LIB = /usr/lib/python2.2/config
# Extra Python specific dynamic linking options
PYTHON_DLNK =
# ----------------------------------------------------------------
# Build a C dynamically loadable module
# ----------------------------------------------------------------
python: $(SRCS)
$(SWIG) -python $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) $(PYTHON_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(PYTHON_DLNK) $(LIBS) -o $(TARGET)module$(SO)
# -----------------------------------------------------------------
# Build a C++ dynamically loadable module
# -----------------------------------------------------------------
python_cpp: $(SRCS)
$(SWIG) -c++ -python $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) $(PYTHON_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(PYTHON_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)module$(SO)
# -----------------------------------------------------------------
# Build a dynamically loadable module, linked against SWIG Runtime lib
# -----------------------------------------------------------------
PYTHON_RUNTIME=-L$(RUNTIMEDIR) -lswigpy
python_multi: $(SRCS)
$(SWIG) -c -python $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) $(PYTHON_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(PYTHON_DLNK) $(LIBS) $(PYTHON_RUNTIME) -o $(TARGET)module$(SO)
python_multi_cpp: $(SRCS)
$(SWIG) -c -c++ -python $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) $(PYTHON_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(PYTHON_DLNK) $(LIBS) $(PYTHON_RUNTIME) $(CPP_DLLIBS) -o $(TARGET)module$(SO)
# -----------------------------------------------------------------
# Build statically linked Python interpreter
#
# These should only be used in conjunction with the %include embed.i
# library file
# -----------------------------------------------------------------
#TKINTER = -L/usr/X11R6.3/lib -L/usr/local/compat/lib -ltk4.0 -ltcl7.4 -lX11
TKINTER =
PYTHON_LIBOPTS = -lpython2.2 -ldl $(TKINTER) $(SYSLIBS)
python_static: $(SRCS)
$(SWIG) -python -lembed.i $(SWIGOPT) $(INTERFACE)
$(CC) $(CFLAGS) -Xlinker -export-dynamic $(ISRCS) $(SRCS) $(INCLUDE) \
$(PYTHON_INCLUDE) $(LIBS) -L$(PYTHON_LIB) $(PYTHON_LIBOPTS) -o $(TARGET)
python_static_cpp: $(SRCS)
$(SWIG) -c++ -python -lembed.i $(SWIGOPT) $(INTERFACE)
$(CXX) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) \
$(PYTHON_INCLUDE) $(LIBS) -L$(PYTHON_LIB) $(PYTHON_LIBOPTS) -o $(TARGET)
# -----------------------------------------------------------------
# Cleaning the python examples
# -----------------------------------------------------------------
python_clean:
rm -f *_wrap* *.o *~ *$(SO) mypython *.pyc .~* core
##################################################################
##### GUILE ######
##################################################################
# Make sure these locate your Guile installation
GUILE_INCLUDE = -I/usr/include
GUILE_LIB = /usr/lib
# ----------------------------------------------------------------
# Build a C dynamically loadable module
# ----------------------------------------------------------------
guile: $(SRCS)
$(SWIG) -guile -Linkage ltdlmod $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ISRCS) $(SRCS)
$(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) -o lib$(TARGET)$(SO)
# -----------------------------------------------------------------
# Build a C++ dynamically loadable module
# -----------------------------------------------------------------
guile_cpp: $(SRCS)
$(SWIG) -c++ -guile -Linkage ltdlmod $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ICXXSRCS) $(SRCS) $(CXXSRCS)
$(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o lib$(TARGET)$(SO)
# -----------------------------------------------------------------
# Build a dynamically loadable module with passive linkage
# -----------------------------------------------------------------
guile_passive: $(SRCS)
$(SWIG) -guile -Linkage passive $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ISRCS) $(SRCS)
$(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) -o lib$(TARGET)$(SO)
guile_passive_cpp: $(SRCS)
$(SWIG) -c++ -guile -Linkage passive $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ICXXSRCS) $(SRCS) $(CXXSRCS)
$(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o lib$(TARGET)$(SO)
# -----------------------------------------------------------------
# Build a dynamically loadable module with passive linkage,
# linked against SWIG runtime lib
# -----------------------------------------------------------------
GUILE_RUNTIME=-L$(RUNTIMEDIR) -lswigguile
guile_passive_multi: $(SRCS)
$(SWIG) -c -guile -Linkage passive $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ISRCS) $(SRCS)
$(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) $(GUILE_RUNTIME) -o lib$(TARGET)$(SO)
guile_passive_multi_cpp: $(SRCS)
$(SWIG) -c -c++ -guile -Linkage passive $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ICXXSRCS) $(SRCS) $(CXXSRCS)
$(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(GUILE_RUNTIME) $(CPP_DLLIBS) -o lib$(TARGET)$(SO)
# -----------------------------------------------------------------
# Build statically linked Guile interpreter
# -----------------------------------------------------------------
GUILE_LIBOPTS = -L/usr/lib -lguile -lm -ldl $(SYSLIBS)
guile_static: $(SRCS)
$(SWIG) -guile -lguilemain.i -Linkage ltdlmod $(SWIGOPT) $(INTERFACE)
$(CC) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) \
-DSWIGINIT="SCM scm_init_$(TARGET)_module(void); scm_init_$(TARGET)_module();" \
$(GUILE_INCLUDE) $(LIBS) -L$(GUILE_LIB) $(GUILE_LIBOPTS) -o $(TARGET)-guile
guile_static_cpp: $(SRCS)
$(SWIG) -c++ -guile -lguilemain.i -Linkage ltdlmod $(SWIGOPT) $(INTERFACE)
$(CXX) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) \
-DSWIGINIT="SCM scm_init_$(TARGET)_module(void); scm_init_$(TARGET)_module();" \
$(GUILE_INCLUDE) $(LIBS) -L$(GUILE_LIB) $(GUILE_LIBOPTS) -o $(TARGET)-guile
guile_simple: $(SRCS)
$(SWIG) -guile -lguilemain.i -Linkage simple $(SWIGOPT) $(INTERFACE)
$(CC) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) \
$(GUILE_INCLUDE) $(LIBS) -L$(GUILE_LIB) $(GUILE_LIBOPTS) -o $(TARGET)-guile
guile_simple_cpp: $(SRCS)
$(SWIG) -c++ -guile -lguilemain.i -Linkage simple $(SWIGOPT) $(INTERFACE)
$(CXX) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) \
$(GUILE_INCLUDE) $(LIBS) -L$(GUILE_LIB) $(GUILE_LIBOPTS) -o $(TARGET)-guile
##################################################################
##### JAVA ######
##################################################################
# You need to set this variable to the java directories containing the
# files "jni.h" and "md.h"
# usually something like /usr/java/include and /usr/java/include/<arch-osname>.
JAVA_INCLUDE= -I/usr/include/kaffe
# Extra Java specific dynamic linking options
JAVA_DLNK =
JAVALIBPREFIX = lib
# ----------------------------------------------------------------
# Build a java dynamically loadable module (C)
# ----------------------------------------------------------------
java: $(SRCS)
$(SWIG) -java $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(JAVA_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) -o $(JAVALIBPREFIX)$(TARGET)$(SO)
# ----------------------------------------------------------------
# Build a java dynamically loadable module (C++)
# ----------------------------------------------------------------
java_cpp: $(SRCS)
$(SWIG) -java -c++ $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(JAVA_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(JAVALIBPREFIX)$(TARGET)$(SO)
# ----------------------------------------------------------------
# Build a java dynamically loadable module
# ----------------------------------------------------------------
java_multi: $(SRCS)
$(SWIG) -java $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(JAVA_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) -o $(JAVALIBPREFIX)$(TARGET)$(SO)
java_multi_cpp: $(SRCS)
$(SWIG) -java -c++ $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(JAVA_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(JAVALIBPREFIX)$(TARGET)$(SO)
# -----------------------------------------------------------------
# Cleaning the java examples
# -----------------------------------------------------------------
java_clean:
mv main.java main.java.tmp
rm -f *_wrap* *.o core *~ *$(SO) *.class *.java
mv main.java.tmp main.java
##################################################################
##### MZSCHEME ######
##################################################################
MZC = test -n "" &&
# ----------------------------------------------------------------
# Build a C/C++ dynamically loadable module
# ----------------------------------------------------------------
mzscheme: $(SRCS)
$(SWIG) -mzscheme $(SWIGOPT) $(INTERFACE)
$(MZC) ++ccf "$(INCLUDE)" --cc $(ISRCS) $(SRCS)
$(MZC) --ld $(TARGET)$(SO) $(OBJS) $(IOBJS)
mzscheme_cpp: $(SRCS)
$(SWIG) -mzscheme -c++ $(SWIGOPT) $(INTERFACE)
$(MZC) ++ccf "$(INCLUDE)" --cc $(ICXXSRCS) $(SRCS) $(CXXSRCS)
$(MZC) --ld $(TARGET)$(SO) $(OBJS) $(IOBJS) $(CPP_DLLIBS)
# ----------------------------------------------------------------
# Build a dynamically loadable module, linked against SWIG runtime
# ----------------------------------------------------------------
MZSCHEME_RUNTIME=-L$(RUNTIMEDIR) -lswigmz
mzscheme_multi: $(SRCS)
$(SWIG) -c -mzscheme $(SWIGOPT) $(INTERFACE)
$(MZC) ++ccf "$(INCLUDE)" --cc $(ISRCS) $(SRCS)
$(MZC) --ld $(TARGET)$(SO) $(OBJS) $(IOBJS) $(MZSCHEME_RUNTIME)
mzscheme_multi_cpp: $(SRCS)
$(SWIG) -c -mzscheme -c++ $(SWIGOPT) $(INTERFACE)
$(MZC) ++ccf "$(INCLUDE)" --cc $(ICXXSRCS) $(SRCS) $(CXXSRCS)
$(MZC) --ld $(TARGET)$(SO) $(OBJS) $(IOBJS) $(MZSCHEME_RUNTIME) $(CPP_DLLIBS)
##################################################################
##### RUBY ######
##################################################################
# Make sure these locate your Ruby installation
RUBY_CFLAGS= -fPIC -DHAVE_CONFIG_H
RUBY_INCLUDE= -I/usr/lib/ruby/1.6/i586-linux-gnu
RUBY_LIB = /usr/lib/ruby/1.6/i586-linux-gnu
RUBY_LIBOPTS = -lruby -ldl -lcrypt -lm -ldl $(SYSLIBS)
RUBY_LIBRUBYARG=
# ----------------------------------------------------------------
# Build a C dynamically loadable module
# ----------------------------------------------------------------
ruby: $(SRCS)
$(SWIG) -ruby $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(RUBY_CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) $(RUBY_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) $(RUBY_LIBRUBYARG) -o $(TARGET)$(SO)
# -----------------------------------------------------------------
# Build a C++ dynamically loadable module
# -----------------------------------------------------------------
ruby_cpp: $(SRCS)
$(SWIG) -c++ -ruby $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(RUBY_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) $(RUBY_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) $(RUBY_LIBRUBYARG) -o $(TARGET)$(SO)
# -----------------------------------------------------------------
# Build a dynamically loadable module, linked against SWIG runtime lib
# -----------------------------------------------------------------
RUBY_RUNTIME=-L$(RUNTIMEDIR) -lswigrb
ruby_multi: $(SRCS)
$(SWIG) -c -ruby $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(RUBY_CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) $(RUBY_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) $(RUBY_RUNTIME) $(RUBY_LIBRUBYARG) -o $(TARGET)$(SO)
ruby_multi_cpp: $(SRCS)
$(SWIG) -c -c++ -ruby $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(RUBY_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) $(RUBY_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(RUBY_RUNTIME) $(CPP_DLLIBS) $(RUBY_LIBRUBYARG) -o $(TARGET)$(SO)
# -----------------------------------------------------------------
# Build statically linked Ruby interpreter
#
# These should only be used in conjunction with the %include embed.i
# library file
# -----------------------------------------------------------------
ruby_static: $(SRCS)
$(SWIG) -ruby -lembed.i $(SWIGOPT) $(INTERFACE)
$(CC) $(CFLAGS) $(RUBY_CFLAGS) -Xlinker -export-dynamic $(ISRCS) $(SRCS) $(INCLUDE) \
$(RUBY_INCLUDE) $(LIBS) -L$(RUBY_LIB) $(RUBY_LIBOPTS) -o $(TARGET)
ruby_cpp_static: $(SRCS)
$(SWIG) -c++ -ruby -lembed.i $(SWIGOPT) $(INTERFACE)
$(CXX) $(CFLAGS) $(RUBY_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) \
$(RUBY_INCLUDE) $(LIBS) -L$(RUBY_LIB) $(RUBY_LIBOPTS) -o $(TARGET)
# -------------------------------------------------------------------
# Build a PHP4 dynamically loadable module (C)
# -------------------------------------------------------------------
PHP4_INCLUDE = -I/usr/include/php -I/usr/include/php/Zend -I/usr/include/php/main -I/usr/include/php/TSRM
php4: $(SRCS)
$(SWIG) -php4 $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(PHP4_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) -o $(TARGET)$(SO)
# --------------------------------------------------------------------
# Build a PHP4 dynamically loadable module (C++)
# --------------------------------------------------------------------
php4_cpp: $(SRCS)
$(SWIG) -php4 -c++ $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(PHP4_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)$(SO)
# ---------------------------------------------------------------------
# Build a dynamically loadable module, linked against SWIG Runtime lib
# ---------------------------------------------------------------------
PHP4_RUNTIME=-L$(RUNTIMEDIR) -lswigphp4
php4_multi: $(SRCS)
$(SWIG) -c -php4 $(SWIGOPT) $(INTERFACE)
$(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) $(PHP4_INCLUDE)
$(LDSHARED) $(OBJS) $(IOBJS) $(PHP4_DLNK) $(LIBS) $(PHP4_RUNTIME) -o $(TARGET)module$(SO)
php4_multi_cpp: $(SRCS)
$(SWIG) -c -c++ -php4 $(SWIGOPT) $(INTERFACE)
$(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) $(PHP4_INCLUDE)
$(CXXSHARED) $(OBJS) $(IOBJS) $(PHP4_DLNK) $(LIBS) $(PHP4_RUNTIME) $(CPP_DLLIBS) -o $(TARGET)module$(SO)
