# epson.conf # # here are some examples for how to configure the EPSON backend # # SCSI scanner: scsi EPSON # # Parallel port scanner: #pio 0x278 #pio 0x378 #pio 0x3BC # # USB scanner: # # Auto-detection of models known to the "epson" backend usb # # Auto-detection of model specified by vendor/product (example is Epson # Perfection 2450, use "lsusb" or "sane-find-scanner" to get the IDs of # your scanner model) #usb 0x04b8 0x0112 # # Selection of scanner by device special file # only enable this if you have an EPSON scanner. It could # otherwise block your non-EPSON scanner from being # recognized. # Depending on your distribution, you may need either the # first or the second entry. #usb /dev/usbscanner0 #usb /dev/usb/scanner0