We have not verified the color correctness on every device. If you find that the color output on your device is not correct, The color output can be adjusted by changing each of the gammas in the gamma file for the particular device you are using. Before you can change the correct gamma you must first be able to identify each of the following: - printer model - type of dither method applied - matrix or diffusion - printing mode, be it mono, 8, or 24 bit black/black and color - media type If you are working with the Epson Stylus Color 860 you can change the file "Epson Stylus 860 Gammas". The structure defining each of the values in the file are contained in DeviceGammas.hpp. The gamma value can be changed along with the bias value, minimum value needed for each color. Raising any of these values will deplete the color that has been changed. Since the Omni driver supports separate per color plane corrections for each media type, print mode, resolution, and dither mode combination you must modify the line representing your current print options.