# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner:
#
# Auto-detection of models known to the "epson" backend
usb
#
# Auto-detection of model specified by vendor/product (example is Epson
# Perfection 2450, use "lsusb" or "sane-find-scanner" to get the IDs of
# your scanner model)
#usb 0x04b8 0x0112
#
# Selection of scanner by device special file
#		only enable this if you have an EPSON scanner. It could
#               otherwise block your non-EPSON scanner from being 
#               recognized.
#		Depending on your distribution, you may need either the
#		first or the second entry.
#usb /dev/usbscanner0
#usb /dev/usb/scanner0