****** Release of sane-backends 1.0.11 ******
2003-02-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* frontend/saned.c sanei/sanei_codec_bin.c sanei/sanei_wire.c: Check
the IP address of the remote host before any communication occurs.
Check for a errors before trsuting values that came from remote.
Make sure that strings are 0-terminated.
* configure configure.in: New version: 1.0.11.
****** Release of sane-backends 1.0.10. End of code freeze ******
2003-02-01 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Artec AM12e+.
2003-01-31 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: New version: 1.0.10. Disabled warnings for
release.
* doc/Makefile.in: Added plustek to list of directories.
2003-01-31 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB.txt: Added comment about scanner.o
* backend/plustek.c backend/plustek-devs.c backend/plustek-usb.h
backend/plustek-usbshading.c: Fixed major bug, that avoid proper
shading on CCD-devices like HP 2200C. Fixed also CanoScan 1220
settings, as the current ones didn't work
2003-01-30 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Canon, Fijitsu and Prolink
scanners.
2003-01-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* frontend/saned.c: Fixed severe bug in saned that allowed a
remote frontend to crash saned (null pointer derefence) if no
scanners are connected.
---- CODE FREEZE FOR SANE 1.0.10 ---
-- snapshot 1.0.10-pre3
2003-01-26 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/sane-backends.de.po po/sane-backends.es.po po/sane-backends.fr.po
po/sane-backends.pt.po po/sane-backends.ru.po po/sane-backends.sv.po:
Minor updates due to backend changes.
* TODO: Added icc problem.
* NEWS: Updated.
2003-01-25 Jochen Eisinger <jochen.eisinger@gmx.de>
* sanei/sanei_pa4s2.c: added some #ifdefs to make it compile with
the Intel C++ Compiler (icc).
* backend/mustek_pp.c: fixed some character encoding issues in
debug messages
* README.linux: added a note about the Intel C++ Compiler
2003-01-24 Jochen Eisinger <jochen.eisinger@gmx.de>
* backend/mustek_pp_ccd300.c: continued on the CCD low-level driver.
There is still some bug in it, that keeps it from actually scanning
something...
2003-01-24 Jochen Eisinger <jochen.eisinger@gmx.de>
* doc/descriptions/mustek_pp.desc: added supported scanners
2003-01-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/bh.c backend/coolscan.c: Minor conversion fixes (from
Andrea Suatoni <a.suatoni@telefonica.net>).
* backend/test.c: Use "Color pattern" consistantly.
* acinclude.m4 aclocal.m4 configure configure.in
include/sane/config.h.in: Declare prototypes for all functions that
may miss on some platforms.
* doc/descriptions/unsupported.desc: Added Mustek parport scanners.
Added more information for Primascan Colorado 2600u.
* TODO: Updated Irix patches and desc section.
2003-01-24 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/plustek/Plustek-USB-TODO.txt
doc/plustek/Plustek-USB.txt
Documentation update
* doc/descriptions/plustek.desc: status updates
* backend/plustek.conf fixed options
* backend/plustek.c backend/plustek-devs.c backend/plustek-usb.c
backend/plustek-usbhw.c backend/plustek-usbimg.c
backend/plustek-usbscan.c backend/plustek-usbshading.c
backend/plustek.h backend/plustek-usb.h
Minor fixes and prototype description updates, code cleanup
2003-01-23 Karl Heinz Kremer <khk@khk.net>
* doc/descriptions/epson.desc: Added Perfection 3200/GT-9800
2003-01-23 Andras Major <andras@users.sourceforge.net>
* backend/doc/sane-coolscan2.man: added a .TP that mysteriously
vanished
2003-01-23 Andras Major <andras@users.sourceforge.net>
* backend/coolscan2.c: hack for IR readout with LS-4000.
2003-01-23 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc: Added Primax/Visioneer Primascan
Colorado 2600u and UMAX Astra 4500.
2003-01-22 Karl Heinz Kremer <khk@khk.net>
* doc/descriptions/epson.desc: Corrected syntax for GT-6000 entry
2003-01-22 Henning Meier-Geinitz <henning@meier-geinitz.de>
* sanei/Makefile.in: Fixed regeneration of libsanei.a when the object
files were changed.
* sanei/sanei_usb.c: Scanning for devices is now done in
sanei_usb_init instead of every time when sanei_usb_find_devices is
called. Also only devices that really exist are opened. These
changes fixe the slow detection of devices on systems using devfs or
old scanner drivers.
2003-01-21 Karl Heinz Kremer <khk@khk.net>
* doc/descriptions/epson.desc: Added "SCSI" to GT-6000 entry
2003-01-21 Eddy De Greef <eddy_de_greef at tiscali dot be>
* backend/mustek_pp_cis.c: compile warning fix and minor debug
message fixes.
* doc/sane-mustek_pp.man: updated supported scanner list and
typo fixes.
2003-01-21 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Adjusted test for sparc64 to disable
SCSI generic v3.
2003-01-20 Karl Heinz Kremer <khk@khk.net>
* doc/descriptions/epson.desc: Replace :new with :alpha
2003-01-19 Karl Heinz Kremer <khk@khk.net>
* backend/epson_usb.c: Added USB product IDs for MFDs.
* doc/descriptions/epson.desc: Updated version number, added
entries for MFDs.
* doc/sane-epson.man: Added MFDs.
-- snapshot 1.0.10-pre2
2003-01-18 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx.c backend/gt68xx_devices.c
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES: Removed
wrong "untested" flag from Mustek AE USB and Lexmark X70/X73
scanners.
* po/sane-backends.de.po po/sane-backends.es.po po/sane-backends.fr.po
po/sane-backends.pt.po po/sane-backends.ru.po po/sane-backends.sv.po:
Regenerated.
2003-01-17 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in include/sane/config.h.in sanei/sanei_scsi.c:
Disable the new Linux SG interface for sparc64 to work-around 32 bit
userland / 64 bit kernel problems.
* doc/descriptions/unsupported.desc: Added HP ScanJet 3500c, 3530c,
3570c, 3570cxi, 5500C and Microtek ScanMaker 3800. Updated link for
ScanJet 4470C.
* TODO: Added links to hp4200 backend. Removed libusb entry, parport
compilation problems, SCSI on sparc64 issue, USB on BSD problems.
2003-01-16 Frank Zago <fzago at austin dot rr dot com>
* backend/leo.c doc/descriptions/leo.desc doc/leo/leo.txt: Added
another scsi string for the fs-1130.
2003-01-16 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/microtek2.c backend/microtek2.h: Bugfix for the X12USL
(solved problems >600dpi), one for lineart mode with a 6400XL
and one for Scanmaker 5 (crashes at sendgamma). From Karsten Festag
<karsten.festag@gmx.de>.
2003-01-15 Henning Meier-Geinitz <henning@meier-geinitz.de>
* sanei/sanei_usb.c: Don't call usb_clearhalt and usb_set_altinterface
to avoid errors on Mac OS X.
* doc/descriptions/unsupported.desc: Added HP 5490c.
2003-01-14 Henning Meier-Geinitz <henning@meier-geinitz.de>
* NEWS: Updated list of backends.
* doc/sane-usb.man: Added remark about old name of usbfs.
* doc/descriptions/unsupported.desc: Added Artec Ultima 2000 (0x4001
model), Canon CanoScan D660U, Compaq S200, Epson Perfection 660,
HP ScanJet 4570C, Microtek ScanMaker 3630. Updated ScanJet 5400C and
5470C URLs, Canon FB1210 information.
2003-01-13 Jochen Eisinger <jochen.eisinger@gmx.de>
* backend/mustek_pp*, backend/Makefile: merged all mustek_pp
related files into one compile unit and removed illegal symbols
2003-01-13 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/descriptions/unsupported.desc: Added HP ScanJet 2300C and various chipset
information for the unsupported Plustek devices
* doc/descriptions/plustek.desc: cleanup
---- FEATURE FREEZE FOR SANE 1.0.10 ---
-- snapshot 1.0.10-pre1
2003-01-12 Jochen Eisinger <jochen.eisinger@gmx.de>
* doc/sane-mustek_pp.man, doc/descriptions/mustek_pp.desc,
backend/mustek_pp*: replaced the old mustek_pp backend with
version 12-alpha. This version fully supports CIS scanners but
removes support for 600dpi CCD scanners and the 300dpi CCD
support isn't yet working. In contrary to the old backend, this
version is based on information provided by Mustek. For now,
the backend exports lots of illegal symbols, this will be fixed
before code freeze. Also the .desc file is empty and will be updated
soon.
* AUTHORS: added Eddy De Greef who wrote the CIS hardware driver part
2003-01-12 Abel Deuring <a.deuring@satzbau-gmbh.de>
* backend/sharp.*: fixed a segfault, when the SCAN command returned
an error; optional "relaxed" handling of transparency unit errors.
2003-01-12 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/descriptions/plustek.desc: Removed the unsupported stuff
* doc/descriptions/unsupported.desc: Removed OpticPro 16B.
2003-01-12 Michael Herder <crapsite@gmx.net>
* doc/descriptions/artec_eplus48u.desc: Added new
models.
2002-01-11 Jochen Eisinger <jochen.eisinger@gmx.de>
* sanei/sanei_pa4s2.h: prepared sanei for use with fork()ing
backends
2003-01-11 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/descriptions/plustek.desc: Update to reflect the currently
supported decvices.
* doc/descriptions/unsupported.desc: Added some Plustek devices.
CanoScan N1220U is now supported by the Plustek backend.
* doc/plustek: Added this directory to store various Plustek
information files.
2003-01-11 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/unsupported.desc
doc/descriptions-external/primax.desc: Some Primax scanners (and
clones) are now supported by the primax backend.
* backend/microtek.c backend/microtek2.conf backend/microtek2.h:
OPT_THRESHOLD fix. Avoid using "_" in option names. Set more
options in microtek2.conf to on by default. From Karsten Festag
<karsten.festag@gmx.de>.
* tools/sane-desc.c: Fixed overwrite warnings. Minor DBG message fixes.
Fixed priority handling (backend and manpage were overwritten even if
a model had a lower priority).
* tools/README: Updated sane-find-scanner and sane-desc.el entries.
* doc/sane-gt68xx.man doc/sane-mustek_usb.man: Updated status for the
BSDs.
2003-01-10 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/sane-backends.pt.po: Even more Portuguese translations from
Pedro Morais <morais@inocam.com>.
* sanei/sanei_usb.c: Comment out resetep at sane_close. This
function sets th USB data toggle only on the host side.
* TODO: Removed microtek2 problem, updated Irix patch section and
Linux/Sparc section.
* NEWS: Updated for 1.0.10.
* backend/mustek.c: Removed hardcoded option size.
2003-01-10 Gerhard Jaeger <gerhard@gjaeger.de>
* TODO: Plustek backend now supports libusb, moved appropriate line
to done section.
2003-01-10 Gerhard Jaeger <gerhard@gjaeger.de>
* doc/sane-plustek.man: update to reflect version change
* doc/descriptions/plustek.desc: Added some Canon entries, status updates
* backend/plustek.conf updated options
* backend/plustek.c backend/plustek-devs.c backend/plustek-usb.c
backend/plustek-usbhw.c backend/plustek-pp.c
backend/plustek-usbmap.c backend/plustek-usbimg.c
backend/plustek-usbscan.c backend/plustek-usbshading.c
backend/plustek.h backend/plustek-share.h backend/plustek-usb.h
New version + support for libusb
2003-01-09 Peter Fales <peter@fales-lorenz.net>
* backend/dc210.c, backend/dc240.c: Fix compile failure
on OS/2.
2003-01-09 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c
backend/gt68xx_high.c doc/sane-gt68xx.man
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES:
Updated manpage and .desc concerning Lexmark X70. Updated manpage
concerning kernel 2.4.21-pre3 containing the 1-endpoint fix. Fixed
A3 USB resolution setting. Updated A3 USB margins (Pedro Morais
<morais@inocam.com>). Added detection of Genius Colorpage Vivid3x.
It's unknown if it works. Updated .desc file. Don't print calib line
warnings by default.
* doc/descriptions/microtek2.desc: Updated (From Karsten Festag
<karsten.festag@gmx.de>).
* po/Makefile.in po/sane-backends.pt.po: Added Portuguese translation
for the gt68xx backend (from Pedro Morais <morais@inocam.com>).
* po/sane-backends.de.po: Added some missing translations. Removed some
(wrong) fuzzy translations.
2003-01-08 Oliver Schwartz <Oliver.Schwartz@gmx.de>
* doc/descriptions/snapscan.desc:
Added entries for Acer/Benq 310U, 320U, 340U and
Mitsubishi Diamondview 650U
* backend/snapscan.c backend/snapscan.h backend/snapscan-scsi.c
backend/snapscan.conf: Backend version 1.4.18, added support for
Acer/Benq310U, fixed color correction for Agfa SnapScan 300
2003-01-08 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/hpsj5s.desc doc/descriptions-external/hp4200.desc:
Use uniform model names for HP scanners.
* doc/descriptions/unsupported.desc: Added Canon CanoScan D1250U2
and HP ScanJet 4400C.
* po/artec_eplus48u.de.po po/epson.de.po po/epson.ru.po
po/epson.sv.po po/gt68xx.de.po po/matsushita.fr.po
po/matsushita.ru.po po/mustek.de.po po/mustek.ru.po
po/mustek_usb.de.po po/mustek_usb.ru.po po/plustek.de.po
po/plustek.es.po po/plustek.ru.po po/pnm.de.po po/pnm.ru.po
po/sceptre.fr.po po/sceptre.ru.po po/snapscan.de.po
po/snapscan.ru.po po/teco1.fr.po po/teco1.ru.po po/umax.de.po
po/umax.fr.po po/umax_pp.de.po po/umax_pp.fr.po po/umax_pp.ru.po
po/umax.ru.po: Remove per-backend translations. The translations
are now in the per-language sane-backends.??.po files.
* po/saneopts.de.po po/saneopts.es.po po/saneopts.fr.po po/saneopts.ru.po
po/saneopts.sv.po: Remove global saneopts translations. The translations
are now in the per-language sane-backends.??.po files.
* TODO: Updated .desc file, mapages, sanei_usb and OS/2 entries. Removed
entry about po files.
* po/Makefile.in: Remove sane-backends.pot from list of distributed
files. Add microtek2 files.
* backend/microtek2.c backend/microtek2.h: Improved support for
Scanmaker X12USL. Alpha support for Scanmaker 9800XL. Some bugfixes.
(From Karsten Festag <karsten.festag@gmx.de>).
* po/sane-backends.de.po: Added translation for microtek2 backend.
(From Karsten Festag <karsten.festag@gmx.de>).
2003-01-07 Peter Fales <peter@fales-lorenz.net>
* TODO: Marked dc210/dc240 items as "done"
2003-01-07 Oliver Rauch <Oliver.Rauch@Rauch-Domain.DE>
* backend/umax.c: update to build 39
2003-01-07 Peter Fales <peter@fales-lorenz.net>
* backend/dc210.c, backend/dc240.c: Use a more portable way
of sending "break" on serial ports.
2003-01-07 Peter Kirchgessner <peter@kirchgessner.net>
* doc/descriptions/hp.desc: Change HP ScanJet to ScanJet
2003-01-07 Stéphane Voltz <svoltz@wanadoo.fr>
* doc/sane-umax_pp.man: updates and fixes
* doc/descriptions/umax_pp.desc: change model form HP3200C to
Scanjet 3200C
2003-01-07 Matthew Duggan <stauff1@users.sourceforge.net>
* backend/canon_pp-dev.c: Improve/fix detection logic.
* doc/descriptions/canon_pp.desc: Bump version number.
2003-01-06 Peter Fales <peter@fales-lorenz.net>
* doc/descriptions/dc25.desc, doc/descriptions/dc210.desc,
doc/descriptions/dc240.desc, doc/descriptions/gphoto2.desc:
Update author information
* backend/dc25.c: Fix compiler warning
* backend/dc210.c, backend/dc240.c, backend/dc210.conf,
backend/dc240.conf, backend/gphoto2.conf, backend/dc25.conf:
Irix fixes from mailing list
2003-01-05 Peter Fales <peter@fales-lorenz.net>
* backend/dc25.c: Mailing list fix. Change = to ==
dc25/dc20 tests.
2003-01-05 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Added link to Irix patches. Updated .desc section.
2003-01-05 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp_low.c: small image quality improvement
* backend/umax_pp.conf: ppdev device is now default option
2003-01-04 Henning Meier-Geinitz <henning@meier-geinitz.de>
* frontend/saned.c: Print version number.
* doc/descriptions/unsupported.desc: Added Genius HR7X Slim,
Visioneer 6200 and Onetouch 8920.
2002-12-31 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: Removed one '//' comment.
2002-12-31 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions-external/onetouch8600.desc: Added (from PROJECTS).
* doc/descriptions/unsupported.desc: Added list of (known) scanners
that are not supported by a SANE backend. There may be information
about them or even a standaalone program to which the entries point.
* PROJECTS: Removed projects that are now in the .desc files.
2002-12-30 Henning Meier-Geinitz <henning@meier-geinitz.de>
* Makefile.in: Removed configure.os2.
* PROJECTS: Removed HP 2200c project (now supported by plustek
backend). Added "NIASH" keyword to hp3300backend.
* README.darwin: Removed comment about dynamic loading. Added
sm3600 and fork problems.
* acinclude.m4 aclocal.m4 config.guess config.sub configure
configure.in ltmain.sh: Update to latest libtool (1.4.3), config.sub
and config.gues. This should fix the build problems on MacOS X
concerning dynamic loading.
* backend/Makefile.in: Backends shouldn't be linked to sanei_config2 if
they aren't also linked to sanei_scsi. sanei_config2 needs
sanei_scsi.
* backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_gt6801.c
backend/gt68xx_gt6816.c backend/gt68xx_high.c backend/gt68xx_high.h
backend/gt68xx_low.h doc/sane-gt68xx.man doc/descriptions/gt68xx.desc
doc/gt68xx/gt68xx.CHANGES: Updated ScanExpress 2400 USB values. Added
implementation of gt6801 lamp control for CCD scanners. Added flag for
SE 2400 USB, added some quirks in gt68xx_gt6801.c. Fixed gt68xx_gt6801
-> lamp control. Adjusted Plustek 1248U geometry and afe values. CCD
gross calibration changed: start with the default value from module
struct. Is faster now for most cases. Only 2.5 mm of calibration for
GT-6801 scanners. Added "afe" option for gt68xx.conf for selecting
default afe values. Removed AFE and exposure SANE options. Added
documentation for afe option in gt68xx.conf. New version: 1.0-35.
* doc/descriptions-external/hp4200.desc
doc/descriptions-external/hpoj.desc: Use Hewlett-Packard consitantly
(instead of HP).
* doc/descriptions-external/scanwit.desc
doc/descriptions-external/viceo.desc: Added description files for
scanwit and viceo backends.
* doc/descriptions-external/tevion9693usb.desc: Removed (now included).
* backend/test.c doc/descriptions/test.desc: Make sure that frontend bugs
concerning the select fd are detected.
* doc/sane-scsi.man: Minor formatting change.
* sanei/sanei_usb.c: Explicitely set first configuration. When claiming
the interface, use the interface number from bInterfaceNumber.
Explicitely set the alternative setting. When closing, call clear_halt,
and reset_ep, and release_interface explicitley. On errors in
write/read, call clear_halt.
* TODO: Added sm3600 issue, htmla manpage issue, sanei_scsi stuff.
Updated desc file, sanei_usb, and MacOSX entries. Deleted sane.tex
stuff (now TODO for SANE2).
2002-12-28 Karl Heinz Kremer <khk@khk.net>
* Added option to display short resolution list to.
2002-12-07 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane-scsi.man: The "scsi ..." way of specifying devices is not
Linux-only. Some minor formatting updates.
* TODO: Added entries for "missing" scanners in desc files: snapscan
and epson. Added sanei_usb issues. Updated MacOS X and OS/2 porting
issues.
* README.darwin: Updated.
* backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c
backend/gt68xx_high.c backend/gt68xx_high.h backend/gt68xx_low.c
backend/gt68xx_low.h doc/sane-gt68xx.man doc/descriptions/gt68xx.desc
doc/gt68xx/gt68xx.CHANGES:
Coarse calibration for first scan only" is off by default now. Added gamma
table factor option (SANE_CAP_EMULATED). Setup gamma to 2.0 by default.
Fixed (hopefully) sigpipe when cancelling. No geometry quantization anymore
(not necessary). Plustek 1248U: do linemode for every resolution, fix color
correction. Added comments for every Model member in gt68xx_devices.
Added Plustek UT16B and Genius Vivid3x to .desc. Added implementation for
inverted offset for CCD scanners. Added Mustek ScanExpress 2400 USB. Well,
at least it's detected. Added NEW marker to .desc.
* doc/descriptions/artec_eplus48u.desc doc/descriptions/hpsj5s.desc
doc/descriptions/teco2.desc doc/descriptions/teco3.desc:
Updated NEW! markers.
2002-12-07 Abel Deuring <a.deuring@satzbau-gmbh.de>
* sanei/sanei_scsi.c: improved error handling
2002-12-07 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: Fixed problem with dropout color
2002-12-06 Peter Kirchgessner <peter@kirchgessner.net>
* backend/hp.h backend/hp.c backend/hp-scl.c backend/hp.conf
* doc/sane-hp.man doc/descriptions/hp.desc
Add option dumb-read to work
around problem with Buslogic SCSI driver
2002-12-06 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure aclocal.m4 acinclude.m4: Fixed MacOS X LD_FLAGS bug.
* doc/sane-scsi.man: Removed link to ACard problem.
* doc/sane.tex: Updated contact information.
* LEVEL2: Removed. Contents is either in the SANE2 standard or in
the SANE2 API TODO.
* Makefile.in doc/Makefile.in: Removed LEVEL2.
2002-12-05 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane-mustek.man doc/sane-mustek_usb.man
doc/descriptions/mustek.desc doc/descriptions/mustek_usb.desc:
Updated links.
* backend/test.c po/sane-backends.de.po: Minor spelling and translation
fixes.
2002-12-04 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/epson_scsi.c backend/sm3600.c: Move config.h include to the
top of the include list to avoid compilation errors on platforms
not defining u_char. Added AIX lalloca check.
* aclocal.m4 acinclude.m4 configure configure.in
include/sane/config.h.in: Cleanup. Added some missing quotes. Better
structure and comments. Tried to keep similar tests in one group.
Moved more complicated tests to acinclude.m4. Added explicit test for
build and host system type. When checking for programs, used $EXEEXT
(hopefully fixes OS/2 gettext misdetection). Removed obsolete
macros. Removed PTAL check. Used autoconf for asm/io.h check.
Shortened --enable-foo output and formatted it correctly. Trans-
lations were installed even if --disable-translations was set. Don't
test for msgcat anymore. Tell why translations aren't installed. Used
autoconf 2.5 syntax for AC_OUTPUT and AC_CONFIG_FILES. Make
sane-config executable. Print flags and installation directories
near the end of configure output.
* po/Makefile.in: Added autoconf comment, removed MSGCAT variable.
* backend/dll.c doc/sane-dll.man doc/descriptions/dll.desc: Ignore
comments that are in the same line as the backend entries. Minor
manpage fixes. Intented according GNU coding standards.
* configure.os2: Removed. No longer necessary.
2002-12-04 Matthew Duggan <stauff1@users.sourceforge.net>
* backend/canon_pp-dev.c: Don't compare firmware version numbers -
multiple versions do actually exist.
* doc/descriptions/canon_pp.desc: Bump version number.
2002-12-03 Peter Fales <peter@fales-lorenz.net>
* backend/gphoto2.c: Don't display the "low resolution" option when
taking a picture, because it doesn't actually do anything.
2002-12-02 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/Makefile.in po/README sane-backends.de.po sane-backends.es.po
sane-backends.fr.po sane-backends.ru.po sane-backends.sv.po:
Use only one file of translated messages per language. Merged
all backend files. Uses UTF-8 everywhere. Updated all files
from the marked source code.
2002-12-01 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp.c: unmarked from SANE_I18N 2 options names
2002-12-01 Rene Rebe <rene.rebe@gmx.net>
* backend/avision.h backend/avision.c backend/avision.conf
doc/descriptions/avision.desc: updated the Avision backend -
including auto-generated .desc file listing all devices
also present in the avision.c device-list.
* doc/descriptions/avision.desc: syntax fix
* doc/sane-avision.man: updated to reflect the current backend
development.
2002-12-01 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in backend/dll.c: Add dynamic loading support
for MacOS X/Darwin (from Peter O'Gorman <peter@pogma.com>).
* TODO: Added sp15c inclusion and low-level buffer prints. Removed
avision warning, hpsj5s freeze, hp/libusb, and manpages issues.
Updated MacOS X list.
* configure configure.in backend/Makefile.in: Use libtool -module
when linking shared libs that will be loaded dynamically.
2002-11-30 Henning Meier-Geinitz <henning@meier-geinitz.de>
* po/Makefile.in po/epson.sv.po po/saneopts.sv.po: Added Swedish
translation (from Dennis Björklund <db@zigo.dhs.org>).
2002-11-29 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in backend/canon630u.c backend/dll.c
backend/gt68xx.c backend/mustek_usb.c backend/net.c backend/pnm.c
backend/test.c backend/umax1220u.c backend/v4l.c doc/Makefile.in
include/sane/config.h.in tools/sane-desc.c: Fixed PACKAGE_VERSION
breakage. PACKAGE_VERSION was redefined by autoconf 2.5 with a
different meaning. Use PACKAGE_STRING instead.
* backend/mustek.c doc/descriptions/mustek.desc
doc/mustek/mustek.CHANGES: PACKAGE_VERSION fix. Fixed debug message
in do_stop: really print exit status of reader process.
* doc/sane-usb.man: PACKAGEVERSION fix. Removed HP exception. Added
MacOS X.
* doc/gamma4scanimage.man doc/sane-artec_eplus48u.man
doc/sane-config.man doc/sane-find-scanner.man doc/sane-gt68xx.man
doc/sane-mustek.man doc/sane-mustek_usb.man doc/sane.man
doc/saned.man doc/scanimage.man: Added missing quotes around
PACKAGEVERSION
* doc/sane-abaton.man doc/sane-agfafocus.man doc/sane-apple.man
doc/sane-artec.man doc/sane-as6e.man doc/sane-avision.man
doc/sane-bh.man doc/sane-canon.man doc/sane-canon630u.man
doc/sane-canon_pp.man doc/sane-coolscan.man doc/sane-coolscan2.man
doc/sane-dc210.man doc/sane-dc240.man doc/sane-dc25.man
doc/sane-dll.man doc/sane-dmc.man doc/sane-epson.man
doc/sane-fujitsu.man doc/sane-gphoto2.man doc/sane-hp.man
doc/sane-hpsj5s.man doc/sane-leo.man doc/sane-matsushita.man
doc/sane-microtek.man doc/sane-microtek2.man doc/sane-mustek_pp.man
doc/sane-nec.man doc/sane-net.man doc/sane-pie.man doc/sane-pint.man
doc/sane-plustek.man doc/sane-pnm.man doc/sane-qcam.man
doc/sane-ricoh.man doc/sane-s9036.man doc/sane-sceptre.man
doc/sane-scsi.man doc/sane-sharp.man doc/sane-sm3600.man
doc/sane-snapscan.man doc/sane-sp15c.man doc/sane-st400.man
doc/sane-tamarack.man doc/sane-teco1.man doc/sane-teco2.man
doc/sane-teco3.man doc/sane-test.man doc/sane-umax.man
doc/sane-umax1220u.man doc/sane-umax_pp.man doc/sane-v4l.man:
Changed "-" to "\-" in .SH NAME section (required by man 7 man).
Added PACKAGEVERSION and "SANE Scanner Access Now Easy" to header.
2002-11-29 Oliver Rauch <Oliver.Rauch@Rauch-Domain.DE>
* frontend/stiff.c: added fclose(icc_file)
2002-11-25 Peter Kirchgessner <peter@kirchgessner.net>
* backend/hp-device.h backend/hp-accessor.c backend/hp-scl.c
backend/hp.c backend/hp-device.c backend/hp-option.c
backend/hp.h backend/hp.conf backend/Makefile.in
doc/sane-hp.man doc/descriptions/hp.desc
Added libusb support for hp-backend
2002-11-25 Henning Meier-Geinitz <henning@meier-geinitz.de>
* PROJECTS: Removed projects for scanners that are now supported
by the plustek backend. Removed lhii backend (dead?). Added more
details for other projects. Added 5400C / 5470C project.
2002-11-23 Rene Rebe <rene.rebe@gmx.net>
* backend/avision.h backend/avision.c backend/avision.conf
doc/sane-avision.man: updated the Avisin backend to my todays
snapshot. It know handles more scanners as well as ADF and A3
size devices.
2002-11-23 Max Vorobiev <pcwizard@yandex.ru>
* backend/hpsj5s.c: Removed default port probing.
2002-11-22 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane.man: Formatting fixes. Updates some backend entries and
sane-find-scanner. Some clarifications.
* doc/scanimage.man: Use "--option arg" format for all options.
Other formatting fixes.
* doc/gamma4scanimage.man doc/sane-config.man doc/sane-find-scanner.man
doc/saned.man: Formatting updates.
2002-11-22 Michael Herder <crapsite at gmx.net>
Fixed header in artec_eplus48u.de.po.
*po/artec_eplus48u.de.po
2002-11-21 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/descriptions/mustek_usb.desc doc/sane-mustek_usb.man
doc/mustek_usb/mustek_usb.CHANGES doc/mustek_usb/mustek_usb.TODO:
Minor manpage fixes. Added links to similar backends. More
information about non-Linux OS.
* doc/sane-mustek.man: Minor fixes. Added links to ther backends
providing support for Mustek scanners.
* backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_gt6816.c
backend/gt68xx_low.c backend/gt68xx_low.h doc/sane-gt68xx.man
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES:
Changed 150 to 200 dpi for Mustek BearPaw 2400 TA. Fixed warnings
in gt68xx_low.c. Used DBG instead of XDBG ing gt68xx_low.c.
Minor manpage fixes. Added man page links to other backends.
gt68xx_low.h: Fixed __FUNCTION__ bug on non-gcc compilers.
Added more details about the BSDs in the manpage. Fixed color order
for ScanExpress A3 USB.
* TODO: Removed tevion9693usb and umax1220u warnings entries. Added
avsion warnings. Little bit of restructuring.
2002-11-21 Michael Herder <crapsite at gmx.net>
Added german translation for artec_eplus48u backend.
*po/artec_eplus48u.de.po
*po/Makefile.in
2002-11-20 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/Makefile.in: Don't generate symlinks for libsane.so/.a, the files
are installed anyway. Fix symlink creation when only static libraries
are created.
2002-11-20 Michael Herder <crapsite at gmx.net>
Added artec_eplus48u backend for the scanner Artec E+ 48U and
re-badged models like Tevion/Medion MD 9693, Medion MD 9705 and
Trust Easy Webscan 19200.
* backend/Makefile.in backend/dll.conf backend/artec_eplus48u.c
backend/artec_eplus48u.conf backend/artec_eplus48u.h
* doc/.cvsignore doc/Makefile.in doc/sane-artec_eplus48u.man doc/sane.man
doc/descriptions/artec_eplus48u.desc
* AUTHORS: Updated concerning artec_eplus48u.
2002-11-19 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane-usb.man: Added quick start section. New structure/order.
Added list of backends that don't use sanei_usb. Added headers
and fixed \- bug.
* doc/sane-find-scanner.man: Minor adjustments, added headers, fixed
\- bug.
2002-11-18 Frank Zago <fzago at austin dot rr dot com>
* backend/umax-usb.c: the usb support for the umax 2200 wasn't
using the correct sanei USB API, which broke the support for that
scanner. Also fixed a couple warnings and a typo.
* backend/sceptre.c backend/teco1.c backend/teco3.c
backend/matsushita.c backend/leo.c: fixed hexdump() declaration.
* backend/dll.c: fixed some warnings.
2002-11-07 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp_low.c: disable test facility
2002-11-17 Henning Meier-Geinitz <henning@meier-geinitz.de>
* TODO: Added manpage issues and hpsj5s freeze problem. Removed canon.c
model problem.
* doc/Makefile.in: Added variable @PACKAGEVERSION@ for usage in
manpages.
2002-11-14 Henning Meier-Geinitz <henning@meier-geinitz.de>
* doc/sane-mustek_usb.man doc/sane-usb.man: Fixed wrong .TH headers.
2002-11-13 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in acinclude.m4 aclocal.m4
include/sane/config.h.in: Fix compilation on Tru64 by readding
the sys/bitypes.h work-around. Minimum autoconf version is 2.50 now.
* backend/gt68xx.c backend/gt68xx.conf backend/gt68xx_devices.c
backend/gt68xx_gt6801.c backend/gt68xx_gt6801.h doc/sane-gt68xx.man
doc/descriptions/gt68xx.desc doc/gt68xx/gt68xx.CHANGES po/gt68xx.de.po:
Added basic support for Plustek OpticPro 1248U (from Gerhard Jaeger
<gerhard@gjaeger.de>). Removed 50 and 1200 dpi from Lexmark X73.
Backend status is BETA now.
2002-11-13 Ulrich Deiters <ukd@xenon.pc.uni-koeln.de>
* modified the Canon SCSI backend (now version 1.10):
* backend/canon.c, canon-scsi.c: Added support of focus control for
the FS2710 film scanner.
backend/canon-sane.c: Set handler_arg in sanei_scsi_open() calls
to zero to avoid crashes with Mandrake Linux 9.0
2002-11-12 Oliver Rauch <Oliver.Rauch@Rauch-Domain.DE>
* added several russion translations to directory po.
The translations have been created by
Vitaly Lipatov <LAV@VL3143.spb.edu>
2002-11-07 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp.c: revert a experimental change that went into
cvs by mistake.
* po/umax_pp.de.po: switch to iso-8858-1
2002-11-07 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_high.h
backend/gt68xx_low.h doc/sane-gt68xx.man doc/descriptions/gt68xx.desc
doc/gt68xx/gt68xx.CHANGES po/Makefile.in po/gt68xx.de.po: Changed
option titles and descriptions to make them better readable. Added
translation markers for all options. Added German translation for
backend options. Updated manpage and .desc file concerning scanner
status. Added untested flag for Mustek ScanEpress A3 USB and Lexmark
X73.
* backend/mustek.c doc/sane-mustek.man doc/descriptions/mustek.desc
doc/mustek/mustek.CHANGES: Upload linear gamma table for Pro models
if custom gamma is off instead of uploading the composed gamma table.
That avoids applying gamm twice. Minor man page update.
2002-11-05 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp.c backend/umax_pp_mid.c : OS/2 compile fix, indent
correction
2002-11-03 Karl Heinz Kremer <khk@khk.net>
* sanei/sanei_usb.c: Use endpoint address with direction information
instead of the pipe reference. This caused problems with Darwin
systems.
2002-11-03 Karl Heinz Kremer <khk@khk.net>
* backend/epson.c: Full support for libusb
2002-11-03 Henning Meier-Geinitz <henning@meier-geinitz.de>
* README configure.in configure po/Makefile.in po/README:
Translations are now enabled by default if the gettext tools are
found. Use msgcat if available. Don't update the .po files
automatically.
* TODO: Added entries about canon.c model extraction bug, and sanei_usb
issue. Updated entries about MAcOS X support. Removed po files entry.
2002-10-31 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Print installation directories.
* backend/gt68xx.c backend/gt68xx_devices.c backend/gt68xx_high.c
backend/gt68xx_low.c backend/gt68xx_low.h doc/gt68xx/gt68xx.CHANGES:
Faster AFE calibration. Minor fixes. New version: 1.0-28.
2002-10-31 Stéphane Voltz <svoltz@wanadoo.fr>
* backend/umax_pp.c backend/umax_pp.h backend/umax_pp_low.h
backend/umax_pp_low.c tools/umax_pp.c: add UTA detection,
version number updates
2002-10-30 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/dll.conf: Removed commented out gt68xx entry.
* PROJECTS: Updated viceo entry.
2002-10-27 Peter Fales <peter@fales-lorenz.net>
* configure, acinclude.m4, aclocal.m4 - Remove checks for
specific version numbers of gphoto2 - that's not good for long
term maintenance, and the API has settled down enough that all
recent versions (both releases and CVS) are workable for SANE.
It is still necessary to specify --with-gphoto2 if you want to
use the gphoto2 backend.
2002-10-27 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Added a warning if sysconfdir is set to
/usr/etc.
* backend/test.c: Explicitely close the pipe and wait until
reader_process is killed.
2002-10-25 Henning Meier-Geinitz <henning@meier-geinitz.de>
* backend/Makefile.in backend/dll.conf backend/gt68xx.c
backend/gt68xx.conf backend/gt68xx.h backend/gt68xx_devices.c
backend/gt68xx_generic.c backend/gt68xx_generic.h
backend/gt68xx_gt6801.c backend/gt68xx_gt6801.h
backend/gt68xx_gt6816.c backend/gt68xx_gt6816.h backend/gt68xx_high.c
backend/gt68xx_high.h backend/gt68xx_low.c backend/gt68xx_low.h
backend/gt68xx_mid.c backend/gt68xx_mid.h
backend/gt68xx_shm_channel.c backend/gt68xx_shm_channel.h:
Added gt68xx backend for scanners based on the Grandtech GT-6801
and GT-8616 chips like The Mustek BearPaw CU, and TA scanners
and some Artec Ultima 2000 clones.
* doc/.cvsignore doc/Makefile.in doc/sane-gt68xx.man doc/sane.man
doc/descriptions/gt68xx.desc doc/descriptions-external/gt68xx.desc
doc/gt68xx/gt68xx.CHANGES: Added documentation for gt68xx backend.
* AUTHORS PROJECTS TODO: Updated concerning gt68xx.
* Makefile.in backend/Makefile.in doc/Makefile.in: Added some missing
files to DISTFILES.
2002-10-24 Peter Fales <peter@fales-lorenz.net>
* backend/gphoto2.c: Improve checks for values specified in config
file and generate errors when invalid values are specified.
2002-10-24 Henning Meier-Geinitz <henning@meier-geinitz.de>
* configure configure.in: Warnings enabled again. Used extra version
-cvs.
Older entries can be found in ChangeLog-1.0.9.
