Technical notes on my code submission of 09 Apr 01
                        Kern Sibbald

General:
- I've been generally unhappy about how hard it is to
  configure apcupsd, especially for the beginner. In addition,
  the Debian people have been having problems with conflicting
  port numbers and pointed out that our default location for
  the EVENTS and STATUS files don't conform to norms (/etc
  should really be a read-only directory).

  After some thought, I have implemented a much more general
  configuration of apcupsd.conf via ./configure, which will
  simplfy greatly the task of configuring and allow a lot
  more flexibility between diffferent system configurations.

  I have now added the following items to the ./configure
  process (some existed previously):

    - The process id directory (PIDDIR)
    - The log directory (for EVENTS and STATUS files) (LOGDIR)
    - The serial port lock directory (LOCKDIR)
    - The serial port device name (SERIALDEV)
    - The Network Information Service port (NISPORT)
    - The Master/Slave network port (NETPORT)
    - The nologin directory (nologdir)
    - The UPS type (UPSTYPE)
    - The UPS cable (UPSCABLE)

  For each of these items, there is an apcupsd "default" specified
  in configure.in as follows:

    - PIDDIR /var/run if it exists; else /etc/apcupsd
    - LOGDIR /var/log if it exists; else /etc/apcupsd
    - LOCKDIR /var/lock if it exists; else /etc/apcupsd
    - SERIALDEV /dev/ttyS0
    - NISPORT 7000
    - NETPORT 6666
    - nologdir /etc 
    - UPSTYPE smartups
    - UPSCABLE smart

  Then each "distribution" can override these apcupsd default
  values.  I have made the following overrides:

   Alpha
     SERIALDEV /dev/tty01
     LOCKDIR   /var/spool/locks
     LOGDIR    /etc/apcupsd

   Debian
     NISPORT 6543
     NETPORT 6544

   FreeBSD
     SERIALDEV /dev/cua01

   NetBSD
     SERIALDEV /dev/cua01

   OpenBSD
     SERIALDEV /dev/cua01
     LOCKDIR   /var/spool/lock

   Win32
     LOCKDIR /apcupsd/etc/apcupsd
     SERIALDEV /dev/com1
     LOGDIR  /apcupsd/etc/apcupsd
     nologdir /apcupsd/etc

  Finally, the user can explicitly override each value by specifying it
  on the ./configure command line:

    PIDDIR      --with-pid-dir=DIR
    LOGDIR      --with-log-dir=DIR
    LOCKDIR     --with-lock-dir=DIR
    SERIALDEV   --with-serial-dev=DEV
    NISPORT     --with-nis-port=PORT
    NETPORT     --with-net-port=PORT
    UPSTYPE     --with-upstype=TYPE
    UPSCABLE    --with-upscable=CABLE
    DISTNAME    --with-distname=DISTNAME

  These values are then put into the appropriate in      
  <src>/etc/apcupsd.conf  giving a pre-configured configuration
  file.