# $Id: TODO,v 1.2 2001/02/21 07:42:32 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
List of outstanding bug reports and change requests
#########################################################################
# **NOTE** This file has not been maintained since HylaFAX transitioned #
# from Sam to HylaFAX.ORG, and is probably of historic value only #
# #
# Bugs should now be reported & tracked by submitting a bug report at: #
# #
# http://bugs.hylafax.org/ #
#########################################################################
BH job group support is broken
B file write errors during receive are not processed correctly
B polling bug in Class 1 driver (reset FCF sndr/rcvr bit at start of Phase B)
B no timeout in Class 1 receive if data is received when waiting for OK
after transmit of TSI (happens easily if wrong receive baud rate setup)
B sloppy processing of +FHNG: response to AT+FDT (extra read+timeout)
H faxadduser program equivalent of SITE ADDUSER command
H job archival support in faxqclean
H revamp modem status to have a fixed format and include useful info
like type, manufacturer, etc.
H fill-in VRFY op to support least-cost routing over a WAN
H use T.30 subaddress routing for received facsimile (needs database)
H polled transmission of documents (use SEP and PWD; add registration
tools and query status support)
H use PWD in TSI qualification
H select modems based on criteria such as destination phone number
(for locations where some lines are capable of long distance calls
while others are not)
H voice support integration
H VOICE/ANSWER button support for ZyXEL
H silent answer support?
M optionally replace info directory with a hashed database file to
reduce overhead on busy systems
M batch multiple jobs to the same destination (important for pages)
M bound transmit page count on a per-user basis
M add type of call control for CID access control list?
M restructure modem classes to support multi-class modems (e.g. class 1+2)
M add faxq lock to avoid naive users starting multiple queuers
BL race in queuer/Dispatcher collecting child process status (hack sleep
in child to give parent time to install SIGCLD handler for now)
BL aborted receives get an extra page written (use TIFFUnlinkDirectory)
L change receive timeout to be based on seeing EOL code
L faxmove program, analogous to lpmove
L permit call type deduction logic used when answering an inbound call to
be user-configurable (useful for distinctive ring)--not so important now
with configurable distinctive ring support builtin
O DataPort<->MicroPorte wedges when retraining after EOM
X add TOD control to TSI+CID access control lists? (no, can do this with
cron job that sends FIFO messages to change control list files)
Since v4.0pl2 there is a new style for the collection of the
bug and problem reports. If you want to hunt for bugs you may also
fetch the article from the mailing-lists using the information
from the "refs:" field. Please use the "report#:" if you have
comments or hints to fix the problem.
---------------
BH report#: 0001
problem: SIGSEGV in hfaxd after pagesend completed and
faxq finished the job
refs: 23/09/1996 Matthias.Apitz@SOFTCON.de
23/09/1996 sam@cthulhu.engr.sgi.com
file: problemReports/0001
---------------
B report#: 0002
problem: faxconfig(1M) does not work for PostScriptTimeout: value
refs: 23/09/1996 Matthias.Apitz@SOFTCON.de
23/09/1996 sam@cthulhu.engr.sgi.com
file: problemReports/0001
---------------
B report#: 0003
problem: MCF/RTN bug in the Class 2/2.0 driver
the modem says "+FPTS: 2,2219,0,0" which means
the page isn't good, ends phase C and ends phase C
and reports "+FET: 2"; HylaFAX just ignores the PPR value
refs: 28/01/1997 Stefan Pettersson <spp@lysator.liu.se>
02/02/1997 Matthias.Apitz@SOFTCON.de
03/02/1997 sam@sgi.com
file: problemReports/0003
---------------
BH report#: 0004
problem: Bug in faxqclean
the TIFF version of the document has a ";31" or ";71"
or some such appended to it, NOT the "q file" number.
The faxqclean program looks at these files,
thinks the "q file" number is 0, and removes the
file since the "q file" does not exist.
refs: 20/02/1997 john@BlueSkyTours.COM
file: problemReports/0004
---------------
B report#: 0005
problem: hp-ux 10.20 has no ut_xtime
GettySysV.c++:215: `struct utmpx' has no member
named `ut_xtime' in /usr/include/utmpx.h
refs: 12/05/1997 meyer-jark@anaesthesie.klinik.uni-mainz.de
file: problemReports/0005
---------------
X report#: 0006 -- resolved in v4.0pl2
problem: "Yes" in modem config doesn't work
refs: 16/07/1997 jik@kamens.brookline.ma.us
file: problemReports/0006
---------------
B report#: 0007
problem: spaces in typerules file not allowed, only TABs
refs: 26/08/1997 stenny@troja.stuttgart.netsurf.de
file: problemReports/0007
---------------
X report#: 0008 -- resolved in v4.0pl2
problem: adding UCP driver to pagesend
refs: 06/02/1997 yngvi@hagkaup.is
28/09/1997 afm@macbeth.othello.ch
file: problemReports/0008
---------------
C report#: 0009
problem: use "client" and "owner" for accounting instead "mailaddr"
refs: 08/02/1997 Andreas.Eulitz@Informatik.TU-Chemnitz.DE
file: problemReports/0009
---------------
B report#: 0010
problem: compiling HylafAX on HP-UX 10.x
refs: 01/05/1997 meyer-jark@anaesthesie.klinik.uni-mainz.de
file: problemReports/0010
---------------
L report#: 0011
problem: gettimeofday(a,b) for older SVR4
refs: 03/03/1997 dlw@seavme.xroads.com
file: problemReports/0011
---------------
C report#: 0012
problem: add ELSA modem config file
refs: 07/05/1997 gobbers@faw9370.faw.uni-ulm.de
file: problemReports/0012
---------------
BH report#: 0013
problem: SEND recv RTN (retrain negative) but page received
at called station
refs: 30/07/1997 pks1@IPA.FhG.de
file: problemReports/0013
---------------
B report#: 0014
problem: faxmail doesn't support 8-bit characters
refs: 30/06/1997 oehansen@utbildning.halmstad.se
file: problemReports/0014
---------------
C report#: 0015
problem: changes for class1 and class1.0
refs: 13/10/1997 sam@sgi.com
file: problemReports/0015
---------------
L report#: 0016
problem: hfaxd only uses LogFacility from hfaxd.conf for
client connections and runs with default LOG_FAX
in parrent proc
refs: -
file: -
---------------
O report#: 0017
problem: possible bug in FaxQueuer dealing with jobs
refs: 29/09/1997 greg@pocketscience.com
file: problemReports/0017
---------------
B report#: 0018
problem: 3 bugs in hfaxd/faxq dealing with the job file
refs: 03/09/1997 davidb@chelsea.net
file: problemReports/0018
---------------
B report#: 0019
problem: faxmail and attachments
refs: 30/10/1997 lrei@ictlux.com
file: problemReports/0019
---------------
O report#: 0020
problem: sendpage && hfaxd SNPP problem
refs: 09/11/1997 frohme@memphis.edu
file: problemReports/0020
---------------
O report#: 0021
problem: stopping faxq(1M) with TimeOfDay:
refs: 17/11/1997 ytrudeau@jyrmatec.com
file: problemReports/0021
---------------
L report#: 0022
problem: LineWrap: at word boundaries
refs: 19/11/1997 patrick@cre8tivegroup.com
file: problemReports/0022
---------------
OH report#: 0023
problem: documents in the docq directory being over writen
refs: 25/11/1997 jared@4websites.com
file: problemReports/0023
---------------
B report#: 0024
problem: better (recent) config.guess
refs: 08/12/1997 jbauza@hotmail.com
file: problemReports/0024
---------------
C report#: 0025
problem: option "-o owner" to sendfax(1)
refs: 05/01/1998 alzhimer@cs.tu-berlin.de
file: problemReports/0025
---------------
B report#: 0026
problem: wrong sendmail rules for faxmail
refs: 07/02/1998 david@djwhome.demon.co.uk
file: problemReports/0026
--
B = outright bug
O = observe (seen at least once but cannot reproduce)
C = change request
H = high priority
M = medium priority
L = low priority
X = resolved
