[4.5.7]
* du would fail with more than one DIR argument when any but the last did not
contain a slash (due to a bug in ftw.c)
[4.5.6]
* du no longer segfaults on Solaris systems (fixed heap-corrupting bug in ftw.c)
* du --exclude=FILE works once again (this was broken by the rewrite for 4.5.5)
* du no longer gets a failed assertion for certain hierarchy lay-outs
involving hard-linked directories
* `who -r' no longer segfaults when using non-C-locale messages
* df now displays a mount point (usually `/') for non-mounted
character-special and block files
[4.5.5]
* ls --dired produces correct byte offset for file names containing
nonprintable characters in a multibyte locale
* du has been rewritten to use a variant of GNU libc's ftw.c
* du now counts the space associated with a directory's directory entry,
even if it cannot list or chdir into that subdirectory.
* du -S now includes the st_size of each entry corresponding to a subdirectory
* rm on FreeBSD can once again remove directories from NFS-mounted file systems
* ls has a new option --dereference-command-line-symlink-to-dir, which
corresponds to the new default behavior when none of -d, -l -F, -H, -L
has been specified.
* ls dangling-symlink now prints `dangling-symlink'.
Before, it would fail with `no such file or directory'.
* ls -s symlink-to-non-dir and ls -i symlink-to-non-dir now print
attributes of `symlink', rather than attributes of their referents.
* Fix a bug introduced in 4.5.4 that made it so that ls --color would no
longer highlight the names of files with the execute bit set when not
specified on the command line.
* shred's --zero (-z) option no longer gobbles up any following argument.
Before, `shred --zero file' would produce `shred: missing file argument',
and worse, `shred --zero f1 f2 ...' would appear to work, but would leave
the first file untouched.
* readlink: new program
* cut: new feature: when used to select ranges of byte offsets (as opposed
to ranges of fields) and when --output-delimiter=STRING is specified,
output STRING between ranges of selected bytes.
* rm -r can no longer be tricked into mistakenly reporting a cycle.
* when rm detects a directory cycle, it no longer aborts the entire command,
but rather merely stops processing the affected command line argument.
[4.5.4]
* cp no longer fails to parse options like this: --preserve=mode,ownership
* `ls --color -F symlink-to-dir' works properly
* ls is much more efficient on directories with valid dirent.d_type.
* stty supports all baud rates defined in linux-2.4.19.
* `du symlink-to-dir/' would improperly remove the trailing slash
* `du ""' would evoke a bounds violation.
* In the unlikely event that running `du /' resulted in `stat ("/", ...)'
failing, du would give a diagnostic about `' (empty string) rather than `/'.
* printf: a hexadecimal escape sequence has at most two hex. digits, not three.
* The following features have been added to the --block-size option
and similar environment variables of df, du, and ls.
- A leading "'" generates numbers with thousands separators.
For example:
$ ls -l --block-size="'1" file
-rw-rw-r-- 1 eggert src 47,483,707 Sep 24 23:40 file
- A size suffix without a leading integer generates a suffix in the output.
For example:
$ ls -l --block-size="K"
-rw-rw-r-- 1 eggert src 46371K Sep 24 23:40 file
* ls's --block-size option now affects file sizes in all cases, not
just for --block-size=human-readable and --block-size=si. Fractional
sizes are now always rounded up, for consistency with df and du.
* df now displays the block size using powers of 1000 if the requested
block size seems to be a multiple of a power of 1000.
* nl no longer gets a segfault when run like this `yes|nl -s%n'
[4.5.3]
* du --dereference-args (-D) no longer fails in certain cases
* `ln --target-dir=DIR' no longer fails when given a single argument
[4.5.2]
* `rm -i dir' (without --recursive (-r)) no longer recurses into dir
* `tail -c N FILE' now works with files of size >= 4GB
* `mkdir -p' can now create very deep (e.g. 40,000-component) directories
* rmdir -p dir-with-trailing-slash/ no longer fails
* printf now honors the `--' command line delimiter
* od's 8-byte formats x8, o8, and u8 now work
* tail now accepts fractional seconds for its --sleep-interval=S (-s) option
[4.5.1]
* du and ls now report sizes of symbolic links (before they'd always report 0)
* uniq now obeys the LC_COLLATE locale, as per POSIX 1003.1-2001 TC1.
========================================================================
Here are the NEWS entries made from fileutils-4.1 until the
point at which the packages merged to form the coreutils:
[4.1.11]
* `rm symlink-to-unwritable' doesn't prompt [introduced in 4.1.10]
[4.1.10]
* rm once again gives a reasonable diagnostic when failing to remove a file
owned by someone else in a sticky directory [introduced in 4.1.9]
* df now rounds all quantities up, as per POSIX.
* New ls time style: long-iso, which generates YYYY-MM-DD HH:MM.
* Any time style can be preceded by "posix-"; this causes "ls" to
use traditional timestamp format when in the POSIX locale.
* The default time style is now posix-long-iso instead of posix-iso.
Set TIME_STYLE="posix-iso" to revert to the behavior of 4.1.1 thru 4.1.9.
* `rm dangling-symlink' doesn't prompt [introduced in 4.1.9]
* stat: remove support for --secure/-s option and related %S and %C format specs
* stat: rename --link/-l to --dereference/-L.
The old options will continue to work for a while.
[4.1.9]
* rm can now remove very deep hierarchies, in spite of any limit on stack size
* new programs: link, unlink, and stat
* New ls option: --author (for the Hurd).
* `touch -c no-such-file' no longer fails, per POSIX
[4.1.8]
* mv no longer mistakenly creates links to preexisting destination files
that aren't moved
[4.1.7]
* rm: close a hole that would allow a running rm process to be subverted
[4.1.6]
* New cp option: --copy-contents.
* cp -r is now equivalent to cp -R. Use cp -R -L --copy-contents to get the
traditional (and rarely desirable) cp -r behavior.
* ls now accepts --time-style=+FORMAT, where +FORMAT works like date's format
* The obsolete usage `touch [-acm] MMDDhhmm[YY] FILE...' is no longer
supported on systems conforming to POSIX 1003.1-2001. Use touch -t instead.
* cp and inter-partition mv no longer give a misleading diagnostic in some
unusual cases
[4.1.5]
* cp -r no longer preserves symlinks
* The block size notation is now compatible with SI and with IEC 60027-2.
For example, --block-size=1MB now means --block-size=1000000,
whereas --block-size=1MiB now means --block-size=1048576.
A missing `B' (e.g. `1M') has the same meaning as before.
A trailing `B' now means decimal, not binary; this is a silent change.
The nonstandard `D' suffix (e.g. `1MD') is now obsolescent.
* -H or --si now outputs the trailing 'B', for consistency with the above.
* Programs now output trailing 'K' (not 'k') to mean 1024, as per IEC 60027-2.
* New df, du short option -B is short for --block-size.
* You can omit an integer `1' before a block size suffix,
e.g. `df -BG' is equivalent to `df -B 1G' and to `df --block-size=1G'.
* The following options are now obsolescent, as their names are
incompatible with IEC 60027-2:
df, du: -m or --megabytes (use -BM or --block-size=1M)
df, du, ls: --kilobytes (use --block-size=1K)
[4.1.4]
* df --local no longer lists smbfs file systems whose name starts with //
* dd now detects the Linux/tape/lseek bug at run time and warns about it.
[4.1.3]
* ls -R once again outputs a blank line between per-directory groups of files.
This was broken by the cycle-detection change in 4.1.1.
* dd once again uses `lseek' on character devices like /dev/mem and /dev/kmem.
On systems with the linux kernel (at least up to 2.4.16), dd must still
resort to emulating `skip=N' behavior using reads on tape devices, because
lseek has no effect, yet appears to succeed. This may be a kernel bug.
[4.1.2]
* cp no longer fails when two or more source files are the same;
now it just gives a warning and doesn't copy the file the second time.
E.g., cp a a d/ produces this:
cp: warning: source file `a' specified more than once
* chmod would set the wrong bit when given symbolic mode strings like
these: g=o, o=g, o=u. E.g., `chmod a=,o=w,ug=o f' would give a mode
of --w-r---w- rather than --w--w--w-.
[4.1.1]
* mv (likewise for cp), now fails rather than silently clobbering one of
the source files in the following example:
rm -rf a b c; mkdir a b c; touch a/f b/f; mv a/f b/f c
* ls -R detects directory cycles, per POSIX. It warns and doesn't infloop.
* cp's -P option now means the same as --no-dereference, per POSIX.
Use --parents to get the old meaning.
* When copying with the -H and -L options, cp can preserve logical
links between source files with --preserve=links
* cp accepts new options:
--preserve[={mode,ownership,timestamps,links,all}]
--no-preserve={mode,ownership,timestamps,links,all}
* cp's -p and --preserve options remain unchanged and are equivalent
to `--preserve=mode,ownership,timestamps'
* mv and cp accept a new option: --reply={yes,no,query}; provides a consistent
mechanism to control whether one is prompted about certain existing
destination files. Note that cp's and mv's -f options don't have the
same meaning: cp's -f option no longer merely turns off `-i'.
* remove portability limitations (e.g., PATH_MAX on the Hurd, fixes for
64-bit systems)
* mv now prompts before overwriting an existing, unwritable destination file
when stdin is a tty, unless --force (-f) is specified, as per POSIX.
* mv: fix the bug whereby `mv -uf source dest' would delete source,
even though it's older than dest.
* chown's --from=CURRENT_OWNER:CURRENT_GROUP option now works
* cp now ensures that the set-user-ID and set-group-ID bits are cleared for
the destination file when when copying and not preserving permissions.
* `ln -f --backup k k' gives a clearer diagnostic
* ls no longer truncates user names or group names that are longer
than 8 characters.
* ls's new --dereference-command-line option causes it to dereference
symbolic links on the command-line only. It is the default unless
one of the -d, -F, or -l options are given.
* ls -H now means the same as ls --dereference-command-line, as per POSIX.
* ls -g now acts like ls -l, except it does not display owner, as per POSIX.
* ls -n now implies -l, as per POSIX.
* ls can now display dates and times in one of four time styles:
- The `full-iso' time style gives full ISO-style time stamps like
`2001-05-14 23:45:56.477817180 -0700'.
- The 'iso' time style gives ISO-style time stamps like '2001-05-14 '
and '05-14 23:45'.
- The 'locale' time style gives locale-dependent time stamps like
'touko 14 2001' and 'touko 14 23:45' (in a Finnish locale).
- The 'posix-iso' time style gives traditional POSIX-locale
time stamps like 'May 14 2001' and 'May 14 23:45' unless the user
specifies a non-POSIX locale, in which case it uses ISO-style dates.
This is the default.
You can specify a time style with an option like --time-style='iso'
or with an environment variable like TIME_STYLE='iso'. GNU Emacs 21
and later can parse ISO dates, but older Emacs versions cannot, so
if you are using an older version of Emacs outside the default POSIX
locale, you may need to set TIME_STYLE="locale".
* --full-time is now an alias for "-l --time-style=full-iso".
========================================================================
Here are the NEWS entries made from sh-utils-2.0 until the
point at which the packages merged to form the coreutils:
[2.0.15]
* date no longer accepts e.g., September 31 in the MMDDhhmm syntax
* fix a bug in this package's .m4 files and in configure.ac
[2.0.14]
* nohup's behavior is changed as follows, to conform to POSIX 1003.1-2001:
- nohup no longer adjusts scheduling priority; use "nice" for that.
- nohup now redirects stderr to stdout, if stderr is not a terminal.
- nohup exit status is now 126 if command was found but not invoked,
127 if nohup failed or if command was not found.
[2.0.13]
* uname and uptime work better on *BSD systems
* pathchk now exits nonzero for a path with a directory component
that specifies a non-directory
[2.0.12]
* kill: new program
* who accepts new options: --all (-a), --boot (-b), --dead (-d), --login,
--process (-p), --runlevel (-r), --short (-s), --time (-t), --users (-u).
The -u option now produces POSIX-specified results and is the same as
the long option `--users'. --idle is no longer the same as -u.
* The following changes apply on systems conforming to POSIX 1003.1-2001,
and are required by the new POSIX standard:
- `date -I' is no longer supported. Instead, use `date --iso-8601'.
- `nice -NUM' is no longer supported. Instead, use `nice -n NUM'.
* New 'uname' options -i or --hardware-platform, and -o or --operating-system.
'uname -a' now outputs -i and -o information at the end.
New uname option --kernel-version is an alias for -v.
Uname option --release has been renamed to --kernel-release,
and --sysname has been renamed to --kernel-name;
the old options will work for a while, but are no longer documented.
* 'expr' now uses the LC_COLLATE locale for string comparison, as per POSIX.
* 'expr' now requires '+' rather than 'quote' to quote tokens;
this removes an incompatibility with POSIX.
* date -d 'last friday' would print a date/time that was one hour off
(e.g., 23:00 on *thursday* rather than 00:00 of the preceding friday)
when run such that the current time and the target date/time fall on
opposite sides of a daylight savings time transition.
This problem arose only with relative date strings like `last monday'.
It was not a problem with strings that include absolute dates.
* factor is twice as fast, for large numbers
[2.0.11]
* setting the date now works properly, even when using -u
* `date -f - < /dev/null' no longer dumps core
* some DOS/Windows portability changes
[2.0j]
* `date -d DATE' now parses certain relative DATEs correctly
[2.0i]
* fixed a bug introduced in 2.0h that made many programs fail with a
`write error' when invoked with the --version option
[2.0h]
* all programs fail when printing --help or --version output to a full device
* printf exits nonzero upon write failure
* yes now detects and terminates upon write failure
* date --rfc-822 now always emits day and month names from the `C' locale
* portability tweaks for Solaris8, Ultrix, and DOS
[2.0g]
* date now handles two-digit years with leading zeros correctly.
* printf interprets unicode, \uNNNN \UNNNNNNNN, on systems with the
required support; from Bruno Haible.
* stty's rprnt attribute now works on HPUX 10.20
* seq's --equal-width option works more portably
[2.0f]
* fix build problems with ut_name vs. ut_user
[2.0e]
* stty: fix long-standing bug that caused test failures on at least HPUX
systems when COLUMNS was set to zero
* still more portability fixes
* unified lib/: now that directory and most of the configuration framework
is common between fileutils, textutils, and sh-utils
[2.0d]
* fix portability problem with sleep vs lib/strtod.c's requirement for -lm
[2.0c]
* fix portability problems with nanosleep.c and with the new code in sleep.c
[2.0b]
* Regenerate lib/Makefile.in so that nanosleep.c is distributed.
[2.0a]
* sleep accepts floating point arguments on command line
* sleep's clock continues counting down when sleep is suspended
* when a suspended sleep process is resumed, it continues sleeping if
there is any time remaining
* who once again prints whatever host information it has, even without --lookup
This package began as the union of the following:
textutils-2.1, fileutils-4.1.11, sh-utils-2.0.15.
