# $Id: ibod.cf,v 1.4 1998/03/10 08:44:28 smith Exp $
# $Symbol$
#
#
#
# Configuration file for ibod (ISDN Bandwidth On Demand)
#
# This file contain the initial configuration values for the
# ibod daemon. Each line contain a keyword and a value.
#
# Boolean attributes are set with 0 or 1 which corresponds to
# false and true respectively. A boolean attribute not specified
# at all is allways false.
#
# Lines beginning with # are treated as comments and are ignored.
#
# IMPORTANT RULES!
#
#	1. Keywords are case sensitive.
#	2. Kewords must begin at first column.
#	3. Keyword and value must be separated by exctly one (1)
#	   space ot tab chracter.
#
# This file is re-read every time ibod receives SIGHUP (1) signal.
#
# DEVICE	<name>	Name of ISDN PPP device.
#			Default is ippp0.
DEVICE ippp0
# ENABLE	1|0	Enable/disable bandwidth-on-demand.
#			Default is enable (1).
ENABLE 1
# INTERVAL	<n>	Specify the sample time interval in ms.
#			Default is 500 ms.
INTERVAL 500
# FILTER	<n>	Defines "filtering factor". A value of 10 means
#			that the average bytes/sec value measured over 10
#			intervals must pass the limit defined by LIMIT
#			to bring up or down the slave link.
#			Default is 5.
#
# LIMIT		<n>	Transfer rate limit in bytes/sec for bringing
#			up or down isdn slave channel.
#			Default is 7000.
#
# STAYUP	0|1	Enable/disable slave channel stay up function.
#			If enabled the 2:nd cannel (slave link) will stay
#			up even if the average bytes/sec decrease the value
#			defined by LIMIT. In this case the slave link will
#			stay up until hangup time is reached.
#			(Example: isdnctrl huptimeout ippp1 60)
#			If disabled the slave link will be brought down in
#			the same way it is brought up.
#			Default is 0.
#
# STAYUP_TIME	<n>	Defines the minimum time in seconds the 2:nd
#			channel will unconditionally stay up after it has
#			been brought up. Default value is 30.
#