--- command.cfg.in	2004-12-02 05:48:37.000000000 +0100
+++ command.cfg.in.oden	2007-04-11 18:09:15.000000000 +0200
@@ -30,7 +30,7 @@
 
 # Service notification command - send email with problem summary
 
-command[notify-by-email]=/bin/printf "$OUTPUT$" | /bin/mail -s '$SERVICESTATE$ alert for $HOSTALIAS$/$SERVICEDESC$' $CONTACTEMAIL$
+#command[notify-by-email]=/bin/printf "$OUTPUT$" | /bin/mail -s '$SERVICESTATE$ alert for $HOSTALIAS$/$SERVICEDESC$' $CONTACTEMAIL$
 
 # Service notification command - send email to alphanumeric pager
 # gateway The notify-by-epager command assumes that each contact has a
@@ -38,14 +38,14 @@
 # appropriate contact field instead of an actual pager number.
 # (i.e. 'pagejoe@nowhere.com' routes mail to Joe's alphanumeric pager)
 
-command[notify-by-epager]=/bin/echo "$OUTPUT$" | /bin/mail -s '$HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$' $CONTACTPAGER$
+#command[notify-by-epager]=/bin/echo "$OUTPUT$" | /bin/mail -s '$HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$' $CONTACTPAGER$
 
 # Host notification commands (one for email, one for alphanumeric
 # pager with email gateway)
 
-command[host-notify-by-email]=/bin/echo -e "***** Nagios *****\n\nHost "$HOSTALIAS$" is $HOSTSTATE$!\n\nDate/Time: $DATETIME$\n" | /bin/mail -s 'Host $HOSTNAME$ is $HOSTSTATE$!' $CONTACTEMAIL$
+#command[host-notify-by-email]=/bin/echo -e "***** Nagios *****\n\nHost "$HOSTALIAS$" is $HOSTSTATE$!\n\nDate/Time: $DATETIME$\n" | /bin/mail -s 'Host $HOSTNAME$ is $HOSTSTATE$!' $CONTACTEMAIL$
 
-command[host-notify-by-epager]=/bin/echo '$HOSTALIAS$ is $HOSTSTATE$!' | /bin/mail -s 'Host $HOSTNAME$ is $HOSTSTATE$!' $CONTACTPAGER$
+#command[host-notify-by-epager]=/bin/echo '$HOSTALIAS$ is $HOSTSTATE$!' | /bin/mail -s 'Host $HOSTNAME$ is $HOSTSTATE$!' $CONTACTPAGER$
 
 
 ## Send notifications to a pager using modem with Qpage (www.qpage.com)
@@ -65,28 +65,28 @@
 # documentation on the plugins for examples of how to configure
 # command definitions.
 
-command[check_tcp]=@libexecdir@/check_tcp -H $HOSTADDRESS$ -p $ARG1$
-command[check_udp]=@libexecdir@/check_udp -H $HOSTADDRESS$ -p $ARG1$
-command[check_ftp]=@libexecdir@/check_ftp -H $HOSTADDRESS$
-command[check_pop]=@libexecdir@/check_pop -H $HOSTADDRESS$
-command[check_smtp]=@libexecdir@/check_smtp -H $HOSTADDRESS$
-command[check_nntp]=@libexecdir@/check_nntp -H $HOSTADDRESS$
-command[check_telnet]=@libexecdir@/check_tcp -H $HOSTADDRESS$ -p 23
+#command[check_tcp]=@libexecdir@/check_tcp -H $HOSTADDRESS$ -p $ARG1$
+#command[check_udp]=@libexecdir@/check_udp -H $HOSTADDRESS$ -p $ARG1$
+#command[check_ftp]=@libexecdir@/check_ftp -H $HOSTADDRESS$
+#command[check_pop]=@libexecdir@/check_pop -H $HOSTADDRESS$
+#command[check_smtp]=@libexecdir@/check_smtp -H $HOSTADDRESS$
+#command[check_nntp]=@libexecdir@/check_nntp -H $HOSTADDRESS$
+#command[check_telnet]=@libexecdir@/check_tcp -H $HOSTADDRESS$ -p 23
 command[check_users]=@libexecdir@/check_users -w $ARG1$ -c $ARG2$
 command[check_ntp]=@libexecdir@/check_ntp -H $HOSTADDRESS$
 command[check_ntp_ntpq]=@libexecdir@/check_ntp -H $HOSTADDRESS$ -j 10 -k 15
 command[check_flexlm]=@libexecdir@/check_flexlm -F $ARG1$
-command[check_hpjd]=@libexecdir@/check_hpjd -H $HOSTADDRESS$ -C public
+#command[check_hpjd]=@libexecdir@/check_hpjd -H $HOSTADDRESS$ -C public
 command[check_mrtg]=@libexecdir@/check_mrtg $ARG1$ 10 AVG $ARG2$ $ARG3$ $ARG4$ $ARG5$ $ARG6$
 command[traffic_average]=@libexecdir@/check_mrtgtraf $ARG1$ 10 AVG $ARG2$ $ARG3$ $ARG4$ $ARG5$
 command[check_load]=@libexecdir@/check_load $ARG1$ $ARG2$ $ARG3$ $ARG4$ $ARG5$ $ARG6$
 
 command[check_disk]=@libexecdir@/check_disk -w 85% -c 95% -p $ARG1$
-command[check_dns]=@libexecdir@/check_dns -H www.yahoo.com -s $HOSTADDRESS$
-command[check_http]=@libexecdir@/check_http -H $HOSTADDRESS$ -I $HOSTADDRESS$
+#command[check_dns]=@libexecdir@/check_dns -H www.yahoo.com -s $HOSTADDRESS$
+#command[check_http]=@libexecdir@/check_http -H $HOSTADDRESS$ -I $HOSTADDRESS$
 command[check_http2]=@libexecdir@/check_http -H $ARG1$ -I $HOSTADDRESS$ -w $ARG2$ -c $ARG3$
 command[check_pgsql]=@libexecdir@/check_pgsql -H $HOSTADDRESS$ 
-command[check_ping]=@libexecdir@/check_ping -H $HOSTADDRESS$ -w 10:20% -c 60:100%
+#command[check_ping]=@libexecdir@/check_ping -H $HOSTADDRESS$ -w 10:20% -c 60:100%
 command[check_procs]=@libexecdir@/check_procs -w $ARG1$ -c $ARG2$
 command[check_procs_zombie]=@libexecdir@/check_procs -w $ARG1$ -c $ARG2$ -s Z
 command[check_procs_httpd]=@libexecdir@/check_procs -w 5:$ARG1$ -c 1:$ARG2$ -C httpd
@@ -153,11 +153,11 @@
 # SNMP NetApp checks (Jason Truong)
 # 
 #
-#command[check_netapp_uptime]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.2.1.1.3.0 --delimiter=')' -l "Uptime is"
+command[check_netapp_uptime]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.2.1.1.3.0 --delimiter=')' -l "Uptime is"
 #
-#command[check_netapp_cpuload]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.789.1.2.1.3.0 -w 90 -c 95 -u '%' -l "CPU LOAD " 
+command[check_netapp_cpuload]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.789.1.2.1.3.0 -w 90 -c 95 -u '%' -l "CPU LOAD " 
 #
-#command[check_netapp_numdisks]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.789.1.6.4.1.0,.1.3.6.1.4.1.789.1.6.4.2.0,.1.3.6.1.4.1.789.1.6.4.8.0,.1.3.6.1.4.1.789.1.6.4.7.0 -u 'Total Disks','Active','Spare','Failed' -l ""
+command[check_netapp_numdisks]=@libexecdir@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.789.1.6.4.1.0,.1.3.6.1.4.1.789.1.6.4.2.0,.1.3.6.1.4.1.789.1.6.4.8.0,.1.3.6.1.4.1.789.1.6.4.7.0 -u 'Total Disks','Active','Spare','Failed' -l ""
 #
 
 #
@@ -165,7 +165,7 @@
 # 
 # the following 4 return the following codes: other=1, ok=2, degraded=3, failed=4
 #
-#command[check_compaq_thermalCondition]=@libexec@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.232.6.2.1.0,.1.3.6.1.4.1.232.6.2.2.0,.1.3.6.1.4.1.232.6.2.3.0,.1.3.6.1.4.1.232.6.2.4.0 -u 'ThermalCondition','ThermalTemp','ThermalSystem','ThermalCPUFan' -w 2:2,2:2,2:2,2:2 -c 1:2,1:2,1:2,1:2 -l "Thermal status "
+command[check_compaq_thermalCondition]=@libexec@/check_snmp -H $HOSTADDRESS$ -C public -o .1.3.6.1.4.1.232.6.2.1.0,.1.3.6.1.4.1.232.6.2.2.0,.1.3.6.1.4.1.232.6.2.3.0,.1.3.6.1.4.1.232.6.2.4.0 -u 'ThermalCondition','ThermalTemp','ThermalSystem','ThermalCPUFan' -w 2:2,2:2,2:2,2:2 -c 1:2,1:2,1:2,1:2 -l "Thermal status "
 #
 #
 
@@ -176,7 +176,7 @@
 # trip average to produce an error.
 
 # This command checks to see if a host is "alive" by pinging it.
-command[check-host-alive]=@libexecdir@/check_ping -H $HOSTADDRESS$ -w 5000,100% -c 5000,100% -p 1
+#command[check-host-alive]=@libexecdir@/check_ping -H $HOSTADDRESS$ -w 5000,100% -c 5000,100% -p 1
 
 # This command checks to see if a printer is "alive" by pinging it.
 command[check-printer-alive]=@libexecdir@/check_ping -H $HOSTADDRESS$ -w 5000,100% -c 5000,100% -p 1