Acc Module
Jiri Kuthan
iptel.org
<jiri@iptel.org>
Bogdan-Andrei Iancu
voice-system.ro
<bogdan@voice-system.ro>
Ramona-Elena Modroiu
rosdev.ro
<ramona@rosdev.ro>
Edited by
Bogdan-Andrei Iancu
voice-system.ro
<bogdan@voice-system.ro>
Edited by
Irina-Maria Stanescu
voice-system.ro
<ironmissy@gmail.com>
Copyright © 2002, 2003 FhG FOKUS
Copyright © 2004, 2006, 2009 voice-system.ro
Revision History
Revision $Revision: 6067 $ $Date: 2009-08-17 17:26:57 +0300
(Mon, 17 Aug 2009) $
__________________________________________________________
Table of Contents
1. Admin Guide
1.1. Overview
1.1.1. General Example
1.2. Extra accounting
1.2.1. Overview
1.2.2. Definitions and syntax
1.2.3. How it works
1.3. Multi Call-Legs accounting
1.3.1. Overview
1.3.2. Configuration
1.3.3. Logged data
1.4. Dependencies
1.4.1. OpenSIPS Modules
1.4.2. External Libraries or Applications
1.5. Exported Parameters
1.5.1. early_media (integer)
1.5.2. failed_transaction_flag (integer)
1.5.3. report_ack (integer)
1.5.4. report_cancels (integer)
1.5.5. detect_direction (integer)
1.5.6. multi_leg_info (string)
1.5.7. log_flag (integer)
1.5.8. log_missed_flag (integer)
1.5.9. log_level (integer)
1.5.10. log_facility (string)
1.5.11. log_extra (string)
1.5.12. aaa_url (string)
1.5.13. aaa_flag (integer)
1.5.14. aaa_missed_flag (integer)
1.5.15. service_type (integer)
1.5.16. aaa_extra (string)
1.5.17. db_flag (integer)
1.5.18. db_missed_flag (integer)
1.5.19. db_table_acc (string)
1.5.20. db_table_missed_calls (string)
1.5.21. db_url (string)
1.5.22. acc_method_column (string)
1.5.23. acc_from_tag_column (string)
1.5.24. acc_to_tag_column (string)
1.5.25. acc_callid_column (string)
1.5.26. acc_sip_code_column (string)
1.5.27. acc_sip_reason_column (string)
1.5.28. acc_time_column (string)
1.5.29. db_extra (string)
1.5.30. diameter_flag (integer)
1.5.31. diameter_missed_flag (integer)
1.5.32. diameter_client_host (string)
1.5.33. diameter_client_port (int)
1.5.34. diameter_extra (string)
1.6. Exported Functions
1.6.1. acc_log_request(comment)
1.6.2. acc_db_request(comment, table)
1.6.3. acc_aaa_request(comment)
1.6.4. acc_diam_request(comment)
2. Frequently Asked Questions
List of Examples
1.1. early_media example
1.2. failed_transaction_flag example
1.3. report_ack example
1.4. report_cancels example
1.5. detect_direction example
1.6. multi_leg_info example
1.7. log_flag example
1.8. log_missed_flag example
1.9. log_level example
1.10. log_facility example
1.11. log_extra example
1.12. Set aaa_url parameter
1.13. aaa_flag example
1.14. aaa_missed_flag example
1.15. service_type example
1.16. aaa_extra example
1.17. db_flag example
1.18. db_missed_flag example
1.19. db_table_acc example
1.20. db_table_missed_calls example
1.21. db_url example
1.22. acc_method_column example
1.23. acc_from_tag_column example
1.24. acc_to_tag_column example
1.25. acc_callid_column example
1.26. acc_sip_code_column example
1.27. acc_sip_reason_column example
1.28. acc_time_column example
1.29. db_extra example
1.30. diameter_flag example
1.31. diameter_missed_flag example
1.32. diameter_client_host example
1.33. diameter_client_host example
1.34. diameter_extra example
1.35. acc_log_request usage
1.36. acc_db_request usage
1.37. acc_aaa_request usage
1.38. acc_diam_request usage
Chapter 1. Admin Guide
1.1. Overview
ACC module is used to account transactions information to
different backends like syslog, SQL, AAA and DIAMETER (beta
version).
To account a transaction and to choose which set of backends to
be used, the script writer just has to set some flags (see the
module parameters section for flag definitions Section 1.5,
"Exported Parameters"). If the accounting flag for a specific
backend is set, the acc module will then report on completed
transaction. A typical usage of the module takes no
acc-specific script command -- the functionality binds
invisibly through transaction processing. Script writers just
need to mark the transaction for accounting with proper
setflag. Even so, the module allows the script writter to force
accounting in special cases via some script functions.
The accounting module will log by default a fixed set of
attributes for the transaction - if you customize your
accounting by adding more information to be logged, please see
the next chapter about extra accounting - Section 1.2, "Extra
accounting".
The fixed minimal accounting information is:
* Request Method name
* From header TAG parameter
* To header TAG parameter
* Call-Id
* 3-digit Status code from final reply
* Reason phrase from final reply
* Time stamp when transaction was completed
If a value is not present in request, the empty string is
accounted instead.
Note that:
* A single INVITE may produce multiple accounting reports --
that's due to SIP forking feature.
* All flags related to accounting need to be set in request
processing route - only the "missed-call" flag may be
toggled from other types of routes.
* There is no session/dialog accounting (yet) -- OpenSIPS
maintains no sessions. If one needs to correlate INVITEs
with BYEs for generating proper CDRs for example for
purpose of billing, then it is better done in the entity
which processes accounting information.
* If a UA fails in middle of conversation, a proxy will never
find out about it. In general, a better practice is to
account from an end-device (such as PSTN gateway), which
best knows about call status (including media status and
PSTN status in case of the gateway).
The SQL and AAA backend support are compiled in the module. For
DIAMETER you need to enable it by recompiling the module with
properly set defines: uncomment DIAM_ACC line in
modules/acc/Makefile. The AAA client needs to be configured
properly.
NOTE: diameter support was developed for DISC (DIameter Server
Client project at http://developer.berlios.de/projects/disc/).
This project seems to be no longer maintained and DIAMETER
specifications were updated in the meantime. Thus, the DIAMETER
part in the module is obsolete and needs rework to be usable
with opendiameter or other DIAMETER servers.
1.1.1. General Example
loadmodule "modules/acc/acc.so"
modparam("acc", "log_level", 1)
modparam("acc", "log_flag", 1)
if (uri=~"sip:+40") /* calls to Romania */ {
if (!proxy_authorize("sip_domain.net" /* realm */,
"subscriber" /* table name */)) {
proxy_challenge("sip_domain.net" /* realm */, "0" /* no qop */ )
;
exit;
}
if (method=="INVITE" && !check_from()) {
log("from!=digest\n");
sl_send_reply("403","Forbidden");
}
setflag(1); /* set for accounting (the same value as in log_flag!)
t_relay(); /* enter stateful mode now */
};
1.2. Extra accounting
1.2.1. Overview
Along the static default information, ACC modules allows
dynamical selection of extra information to be logged. This
allows you to log any pseudo-variable (AVPs, parts of the
request, parts of the reply, etc).
1.2.2. Definitions and syntax
Selection of extra information is done via xxx_extra parameters
by specifying the names of additional information you want to
log. This information is defined via pseudo-variables and may
include headers, AVPs values or other message or system values.
The syntax of the parameter is:
* xxx_extra = extra_definition (';'extra_definition)*
* extra_definition = log_name '=' pseudo_variable ['/reply']
Each PV (pseudo variable) may be evaluated in the context of
the request message (to access info from it) or in the context
of the reply message (final reply for the request).
Using "/reply" marker, the PV will be evaluated in the context
of the reply; by default (without the marker), the evaluation
is done in the contect of the request. This will allow you to
automatically account information (message or network related)
from both request and reply in the same time.
The full list of supported pseudo-variables in OpenSIPS is
availabe at:
http://www.opensips.org/pmwiki.php?n=Resources.DocsCoreVar
Via log_name you define how/where the data will be logged. Its
meaning depends of the accounting support which is used:
* LOG accounting - log_name will be just printed along with
the data in log_name=data format;
* DB accounting - log_name will be the name of the DB column
where the data will be stored.IMPORTANT: add in db acc
table the columns corresponding to each extra data;
* AAA accounting - log_name will be the AVP name used for
packing the data into AAA message. The log_name will be
translated to AVP number via the dictionary. IMPORTANT: add
in AAA dictionary the log_name attribute.
* DIAMETER accounting - log_name will be the AVP code used
for packing the data into DIAMETER message. The AVP code is
given directly as integer, since DIAMETER has no dictionary
support yet. IMPORTANT: log_name must be a number.
1.2.3. How it works
Some pseudo variables may return more than one value (like
headers or AVPs). In this case, the returned values are
embedded in a single string in a comma-separated format.
1.3. Multi Call-Legs accounting
1.3.1. Overview
A SIP call can have multiple legs due forwarding actions. For
example user A calls user B which forwards the call to user C.
There is only one SIP call but with 2 legs ( A to B and B to
C). Accounting the legs of a call is required for proper
billing of the calls (if C is a PSTN number and the call is
billed, user B must pay for the call - as last party modifing
the call destination-, and not A - as initiator of the call.
Call forwarding on server is only one example which shows the
necessity of the having an accounting engine with multiple legs
support.
1.3.2. Configuration
First how it works: The idea is to have a set of AVPs and for
each call leg to store a set of values in the AVPs. The meaning
of the AVP content is stricly decided by the script writer - it
can be the origin and source of the leg, its status or any
other related information. If you have a set of 4 AVPS (AVP1,
AVP2, AVP3, AVP4), then for the "A call B and B forwards to C"
example, you need to set a different set of values for the AVPs
for each leg ([A,B] and [B,C]) . The script writer must take
care and properly insert all these AVP from the script (in
proper order and with the correct type).
When the accounting information for the call will be
written/sent, all the call-leg pairs will be added (based on
the found AVP sets).
By default, the multiple call-leg support is disabled - it can
be enabled just be setting the per-leg set of AVPs via the
multi_leg_info module parameter.
1.3.3. Logged data
For each call, all the values of the AVP set (which defines a
call-leg) will be logged. How the information will be actually
logged, depends of the data backend:
* syslog -- all leg-sets will be added to one record string
as AVP1=xxx, AVP2=xxxx ,... sets.
* database -- each pair will be separately logged (due DB
data structure constraints); several records will be
written, the difference between them being only the fields
corresponding to the call-leg info.
Note
You will need to add in your DB (all acc related tables)
the colums for call-leg info (a column for each AVP of the
set).
* AAA -- all sets will be added to the same AAA accounting
message as AAA AVPs - for each call-leg a set of AAA AVPs
will be added (corresponding to the per-leg AVP set)
Note
You will need to add in your dictionary the AAA AVPs used
in call-leg AVP set definition.
* Diameter same as for AAA.
1.4. Dependencies
1.4.1. OpenSIPS Modules
The module depends on the following modules (in the other words
the listed modules must be loaded before this module):
* tm -- Transaction Manager
* a database module -- If SQL support is used.
* rr -- Record Route, if "detect_direction" module parameter
is enabled.
* an aaa module
1.4.2. External Libraries or Applications
The following libraries or applications must be installed
before running OpenSIPS with this module loaded:
* none.
1.5. Exported Parameters
1.5.1. early_media (integer)
Should be early media (any provisional reply with body)
accounted too ?
Default value is 0 (no).
Example 1.1. early_media example
modparam("acc", "early_media", 1)
1.5.2. failed_transaction_flag (integer)
Per transaction flag which says if the transaction should be
accounted also in case of failure (status>=300).
Default value is not-set (no flag).
Example 1.2. failed_transaction_flag example
modparam("acc", "failed_transaction_flag", 4)
1.5.3. report_ack (integer)
Shall acc attempt to account e2e ACKs too ? Note that this is
really only an attempt, as e2e ACKs may take a different path
(unless RR enabled) and mismatch original INVITE (e2e ACKs are
a separate transaction).
Default value is 0 (no).
Example 1.3. report_ack example
modparam("acc", "report_ack", 1)
1.5.4. report_cancels (integer)
By default, CANCEL reporting is disabled -- most accounting
applications wants to see INVITE's cancellation status. Turn on
if you explicitly want to account CANCEL transactions.
Default value is 0 (no).
Example 1.4. report_cancels example
modparam("acc", "report_cancels", 1)
1.5.5. detect_direction (integer)
Controls the direction detection for sequential requests. If
enabled (non zero value), for sequential requests with upstream
direction (from callee to caller), the FROM and TO will be
swapped (the direction will be preserved as in the original
request).
It affects all values related to TO and FROM headers (body,
URI, username, domain, TAG).
Default value is 0 (disabled).
Example 1.5. detect_direction example
modparam("acc", "detect_direction", 1)
1.5.6. multi_leg_info (string)
Defines the AVP set to be used in per-call-leg accounting. See
Section 1.3, "Multi Call-Legs accounting" for a detailed
description of the Multi Call-Legs accounting.
If empty, the multi-leg accounting support will be disabled.
Default value is 0 (disabled).
Example 1.6. multi_leg_info example
# for syslog-based accounting, use any text you want to be printed
modparam("acc", "multi_leg_info",
"text1=$avp(src);text2=$avp(dst)")
# for mysql-based accounting, use the names of the columns
modparam("acc", "multi_leg_info",
"leg_src=$avp(src);leg_dst=$avp(dst)")
# for AAA-based accounting, use the names of the AAA AVPs
modparam("acc", "multi_leg_info",
"AAA_LEG_SRC=$avp(src);AAA_LEG_SRC=$avp(dst)")
# for DIAMETER-based accounting, use the DIAMETER AVP ID (as integer)
modparam("acc", "multi_leg_info",
"2345=$avp(src);2346=$avp(dst)")
1.5.7. log_flag (integer)
Request flag which needs to be set to account a transaction via
syslog.
Default value is not-set (no flag).
Example 1.7. log_flag example
modparam("acc", "log_flag", 2)
1.5.8. log_missed_flag (integer)
Request flag which needs to be set to account missed calls via
syslog.
Default value is not-set (no flag).
Example 1.8. log_missed_flag example
modparam("acc", "log_missed_flag", 3)
1.5.9. log_level (integer)
Log level at which accounting messages are issued to syslog.
Default value is L_NOTICE.
Example 1.9. log_level example
modparam("acc", "log_level", 2) # Set log_level to 2
1.5.10. log_facility (string)
Log facility to which accounting messages are issued to syslog.
This allows to easily seperate the accounting specific logging
from the other log messages.
Default value is LOG_DAEMON.
Example 1.10. log_facility example
modparam("acc", "log_facility", "LOG_DAEMON")
1.5.11. log_extra (string)
Extra values to be logged.
Default value is NULL.
Example 1.11. log_extra example
modparam("acc", "log_extra",
"uaA=$hdr(User-Agent);uaB=$hdr(Server)/reply;uuid=$avp(i:123)")
1.5.12. aaa_url (string)
This is the url representing the AAA protocol used and the
location of the configuration file of this protocol.
If the parameter is set to empty string, the AAA accounting
support will be disabled.
Default value is "NULL".
Example 1.12. Set aaa_url parameter
...
modparam("acc", "aaa_url", "radius:/etc/radiusclient-ng/radiusclient.con
f")
...
1.5.13. aaa_flag (integer)
Request flag which needs to be set to account a transaction --
AAA specific.
Default value is not-set (no flag).
Example 1.13. aaa_flag example
modparam("acc", "aaa_flag", 2)
1.5.14. aaa_missed_flag (integer)
Request flag which needs to be set to account missed calls --
AAA specific.
Default value is not-set (no flag).
Example 1.14. aaa_missed_flag example
modparam("acc", "aaa_missed_flag", 3)
1.5.15. service_type (integer)
AAA service type used for accounting.
Default value is not-set.
Example 1.15. service_type example
# Default value of service type for SIP is 15
modparam("acc", "service_type", 15)
1.5.16. aaa_extra (string)
Extra values to be logged via AAA - AAA specific.
Default value is NULL.
Example 1.16. aaa_extra example
modparam("acc", "aaa_extra",
"via=$hdr(Via[*]); email=$avp(s:email); Bcontact=$ct / reply")
1.5.17. db_flag (integer)
Request flag which needs to be set to account a transaction --
database specific.
Default value is not-set (no flag).
Example 1.17. db_flag example
modparam("acc", "db_flag", 2)
1.5.18. db_missed_flag (integer)
Request flag which needs to be set to account missed calls --
database specific.
Default value is not-set (no flag).
Example 1.18. db_missed_flag example
modparam("acc", "db_missed_flag", 3)
1.5.19. db_table_acc (string)
Table name of accounting successfull calls -- database
specific.
Default value is "acc"
Example 1.19. db_table_acc example
modparam("acc", "db_table_acc", "myacc_table")
1.5.20. db_table_missed_calls (string)
Table name for accounting missed calls -- database specific.
Default value is "missed_calls"
Example 1.20. db_table_missed_calls example
modparam("acc", "db_table_missed_calls", "myMC_table")
1.5.21. db_url (string)
SQL address -- database specific. If is set to NULL or empty
string, the SQL support is disabled.
Default value is "NULL" (SQL disabled).
Example 1.21. db_url example
modparam("acc", "db_url", "mysql://user:password@localhost/opensips")
1.5.22. acc_method_column (string)
Column name in accounting table to store the request's method
name as string.
Default value is "method".
Example 1.22. acc_method_column example
modparam("acc", "acc_method_column", "method")
1.5.23. acc_from_tag_column (string)
Column name in accounting table to store the From header TAG
parameter.
Default value is "from_tag".
Example 1.23. acc_from_tag_column example
modparam("acc", "acc_from_tag_column", "from_tag")
1.5.24. acc_to_tag_column (string)
Column name in accounting table to store the To header TAG
parameter.
Default value is "to_tag".
Example 1.24. acc_to_tag_column example
modparam("acc", "acc_to_tag_column", "to_tag")
1.5.25. acc_callid_column (string)
Column name in accounting table to store the request's Callid
value.
Default value is "callid".
Example 1.25. acc_callid_column example
modparam("acc", "acc_callid_column", "callid")
1.5.26. acc_sip_code_column (string)
Column name in accounting table to store the final reply's
numeric code value in string format.
Default value is "sip_code".
Example 1.26. acc_sip_code_column example
modparam("acc", "acc_sip_code_column", "sip_code")
1.5.27. acc_sip_reason_column (string)
Column name in accounting table to store the final reply's
reason phrase value.
Default value is "sip_reason".
Example 1.27. acc_sip_reason_column example
modparam("acc", "acc_sip_reason_column", "sip_reason")
1.5.28. acc_time_column (string)
Column name in accounting table to store the time stamp of the
transaction completion in date-time format.
Default value is "time".
Example 1.28. acc_time_column example
modparam("acc", "acc_time_column", "time")
1.5.29. db_extra (string)
Extra values to be logged into database - DB specific.
Default value is NULL.
Example 1.29. db_extra example
modparam("acc", "db_extra", "ct=$hdr(Content-type); email=$avp(s:email)"
)
1.5.30. diameter_flag (integer)
Request flag which needs to be set to account a transaction --
DIAMETER specific.
Default value is not-set (no flag).
Example 1.30. diameter_flag example
modparam("acc", "diameter_flag", 2)
1.5.31. diameter_missed_flag (integer)
Request flag which needs to be set to account missed calls --
DIAMETER specific.
Default value is not-set (no flag).
Example 1.31. diameter_missed_flag example
modparam("acc", "diameter_missed_flag", 3)
1.5.32. diameter_client_host (string)
Hostname of the machine where the DIAMETER Client is running --
DIAMETER specific.
Default value is "localhost".
Example 1.32. diameter_client_host example
modparam("acc", "diameter_client_host", "3a_server.net")
1.5.33. diameter_client_port (int)
Port number where the Diameter Client is listening -- DIAMETER
specific.
Default value is "3000".
Example 1.33. diameter_client_host example
modparam("acc", "diameter_client_port", 3000)
1.5.34. diameter_extra (string)
Extra values to be logged via DIAMETER - DIAMETER specific.
Default value is NULL.
Example 1.34. diameter_extra example
modparam("acc", "diameter_extra", "7846=$hdr(Content-type);7847=$avp(s:e
mail)")
1.6. Exported Functions
1.6.1. acc_log_request(comment)
acc_request reports on a request, for example, it can be used
to report on missed calls to off-line users who are replied 404
- Not Found. To avoid multiple reports on UDP request
retransmission, you would need to embed the action in stateful
processing.
Meaning of the parameters is as follows:
* comment - Comment to be appended.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE.
Example 1.35. acc_log_request usage
...
acc_log_request("Some comment");
...
1.6.2. acc_db_request(comment, table)
Like acc_db_request, acc_db_request reports on a request. The
report is sent to database at "db_url", in the table referred
to in the second action parameter.
Meaning of the parameters is as follows:
* comment - Comment to be appended.
* table - Database table to be used.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE.
Example 1.36. acc_db_request usage
...
acc_log_request("Some comment", "Some table");
...
1.6.3. acc_aaa_request(comment)
Like acc_log_request, acc_aaa_request reports on a request. It
reports to aaa server as configured in "aaa_url".
Meaning of the parameters is as follows:
* comment - Comment to be appended.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE.
Example 1.37. acc_aaa_request usage
...
acc_aaa_request("Some comment");
...
1.6.4. acc_diam_request(comment)
Like acc_log_request, acc_diam_request reports on a request. It
reports to the configured Diameter server.
Meaning of the parameters is as follows:
* comment - Comment to be appended.
This function can be used from REQUEST_ROUTE, FAILURE_ROUTE.
Example 1.38. acc_diam_request usage
...
acc_diam_request("Some comment");
...
Chapter 2. Frequently Asked Questions
2.1.
What happened with old log_fmt parameter
The parameter became obsolete with the restructure of the data
logged by ACC module (refer to the Overview chapter). For
similar behaviour you can use the extra accouting (see the
corresponding chapter).
2.2.
What happened with old multi_leg_enabled parameter
The parameter became obsolete by the addition of the new
multi_leg_info parameter. The multi-leg accouting is
automatically enabled when multi_leg_info is defined.
2.3.
What happened with old src_leg_avp_id and dst_leg_avp_id
parameters
The parameter was replaced by the more generic new parameter
multi_leg_info. This allows logging (per-leg) of more
information than just dst and src.
2.4.
Where can I find more about OpenSIPS?
Take a look at http://www.opensips.org/.
2.5.
Where can I post a question about this module?
First at all check if your question was already answered on one
of our mailing lists:
* User Mailing List -
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
* Developer Mailing List -
http://lists.opensips.org/cgi-bin/mailman/listinfo/devel
E-mails regarding any stable OpenSIPS release should be sent to
<users@lists.opensips.org> and e-mails regarding development
versions should be sent to <devel@lists.opensips.org>.
If you want to keep the mail private, send it to
<users@lists.opensips.org>.
2.6.
How can I report a bug?
Please follow the guidelines provided at:
http://sourceforge.net/tracker/?group_id=232389.
