Sophie

Sophie

distrib > Mandriva > current > x86_64 > by-pkgid > d58aa6ed085e243e8502e25a113915d3 > files > 271

tuxpaint-0.9.21-2mdv2010.2.x86_64.rpm

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html><head><title>Tux Paint Advanced Stamps HOWTO</title>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
</head>

<body bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#FF0000"
alink="#FF00FF">

<center>
<h1><img src="images/tuxpaint-title.png" width=220 height=219
alt="Tux&nbsp;Paint"><br>
version

0.9.21

<br>
Advanced Stamps HOWTO</h1>

<p>Copyright 2006-2008 by Albert Cahalan for the Tux Paint project<br>
New Breed Software</p>
<p><a href="mailto:albert@users.sf.net">albert@users.sf.net</a><br>
<a href="http://www.tuxpaint.org/">http://www.tuxpaint.org/</a></p>

<p>March 8, 2006 - July 7, 2008</p>
</center>


<h2>About this HOWTO</h2>
<blockquote>

  <p>This HOWTO assumes that you want to make an excellent Tux&nbsp;Paint
  stamp, in PNG bitmapped format, from a JPEG image (e.g., a digital
  photograph). There are easier and faster methods that
  produce lower quality.</p>

  <p>This HOWTO assumes you are dealing with normal opaque objects. Dealing
  with semi-transparent objects (fire, moving fan blade, kid's baloon)
  or light-giving objects (fire, lightbulb, sun) is best done with custom
  software. Images with perfect solid-color backgrounds are also best done
  with custom software, but are not troublesome to do as follows.</p>

</blockquote>

<h2>Image choice is crucial</h2>
<blockquote>

  <h3>License</h3>
  <blockquote>

    <p>If you wish to submit artwork to the Tux&nbsp;Paint developers for
    consideration for inclusion in the official project, or if you wish to
    release your own copy of Tux&nbsp;Paint, bundled with your own graphics,
    you need an image that is compatible with the GNU
    <a href="../COPYING.txt">General Public License</a> used by
    Tux&nbsp;Paint.</p>

    <p>Images produced by the US government are Public Domain, but be aware
    that the US government sometimes uses other images on the web.
    <a href="http://images.google.com/">Google image</a> queries including
    either <code>site:gov</code> or <code>site:mil</code> will supply many
    suitable images. (Note: the *.mil sites include non-military content,
    too!)</p>

    Your own images can be placed in the Public&nbsp;Domain by declaring it
    so. (Hire a lawyer if you feel the need for legal advice.)</p>

    <p>For personal use, any image you can legitimately modify and use
    for your own personal use should be fine.</p>

  </blockquote>

  <h3>Image Size and Orientation:</h3>
  <blockquote>

    <p>You need an image that has a useful orientation. Perspective is
    an enemy. Images that show an object from the corner are difficult to
    fit into a nice drawing. As a general rule, telephoto side views are
    the best. The impossible ideal is that, for example, two wheels of a
    car are perfectly hidden behind the other two.</p>

    <p>Rotating an image can make it blurry, especially if you only rotate by
    a few degrees. Images that don't need rotation are best, images that need
    lots of rotation (30 to 60 degrees) are next best, and images that need
    just a few degrees are worst. Rotation will also make an image darker
    because most image editing software is very bad about gamma handling.
    (Rotation is only legitimate for gamma=1.0 images.)</p>

    <p>Very large images are more forgiving of mistakes, and thus easier to
    work with. Choose an image with an object that is over 1000 pixels
    across if you can. You can shrink this later to hide your mistakes.</p>

    <p>Be sure that the image is not too grainy, dim, or washed out.</p>

    <p>Pay attention to feet and wheels. If they are buried in something,
    you will need to draw new ones. If only one is buried, you might be
    able to copy the other one as a replacement.</p>

  </blockquote>
</blockquote>

<h2>Prepare the image:</h2>
<blockquote>

  <p>First of all, be sure to avoid re-saving the image as a JPEG. This causes
  quality loss. There is a special tool called
  <a href="http://gnuwin32.sourceforge.net/packages/jpeg.htm">jpegtran</a>
  that lets you crop an image without the normal quality loss. If you want a
  GUI for it, use
  <a href="http://astron.berkeley.edu/~mperrin/software/ljcrop/">ljcrop</a>.
  Otherwise, use it like this:</p>

  <blockquote>
    <p><code>jpegtran -trim -copy none -crop 512x1728+160+128 &lt; src.jpg
    &gt; cropped.jpg</code></p>
  </blockquote>

  <p>Bring that image up in your image editor. If you didn't crop it yet,
  you may find that your image editor is very slow. Rotate and crop the
  image as needed. Save the image &mdash; choose whatever native format
  supports layers, masks, alpha, etc.  <a href="http://www.gimp.org/">GIMP</a>
  users should choose "XCF", and Adobe Photoshop users should choose "PSD",
  for example.</p>

  <p>If you have rotated or cropped the image in your image editor, flatten
  it now. You need to have just one RGB layer <i>without mask or
  alpha</i>.</p>

  <p>Open the layers dialog box. Replicate the one layer several times.
  From top to bottom you will need something like this:</p>

  <ol>
  <li>unmodified image (write-protect this if you can)
  <li>an image you will modify &mdash; the "WIP" layer
  <li>solid green (write-protect this if you can)
  <li>solid magenta (write-protect this if you can)
  <li>unmodified image (write-protect this if you can)
  </ol>

  <p>Give the WIP layer a rough initial mask. You might start with a
  selection, or by using the grayscale value of the WIP layer. You might
  invert the mask.</p>

  <p><b>Warning:</b> once you have the mask, you may not rotate or
  scale the image normally. This would cause data loss. You will be
  given special scaling instructions later.</p>

</blockquote>

<h2>Prepare the mask:</h2>
<blockquote>

  <p>Get used to doing Ctrl-click and Alt-click on the thumbnail images in the
  layers dialog. You will need this to control what you are looking at and
  what you are editing. Sometimes you will be editing things you can't see.
  For example, you might edit the mask of the WIP layer while looking at the
  unmodified image. Pay attention so you don't screw up. Always verify that
  you are editing the right thing.</p>

  <p>Set an unmodified image as what you will view (the top one is easiest).
  Set the WIP mask as what you will edit. At some point, perhaps not
  immediately, you should magnify the image to about 400% (each pixel of
  the image is seen and edited as a 4x4 block of pixels on your screen).</p>

  <p>Select parts of the image that need to be 100% opaque or 0% opaque.
  If you can select the object or background somewhat accurately by
  color, do so. As needed to avoid selecting any pixels that should be
  partially opaque (generally at the edge of the object) you should
  grow, shrink, and invert the selection.</p>

  <p>Fill the 100% opaque areas with white, and the 0% opaque areas with
  black. This is most easily done by drag-and-drop from the
  foreground/background color indicator. You should not see anything happen,
  because you are viewing the unmodified image layer while editing the mask
  of the WIP layer. Large changes might be noticable in the thumbnail.</p>

  <p>Now you must be zoomed in.</p>

  <p>Check your work. Hide the top unmodified image layer. Display just the
  mask, which should be a white object on a black background (probably
  with unedited grey at the edge). Now display the WIP layer normally, so
  that the mask is active. This should show your object over top of the
  next highest enabled layer, which should be green or magenta as needed
  for maximum contrast. You might wish to flip back and forth between
  those backgrounds by repeatedly clicking to enable/disable the green
  layer. Fix any obvious and easy problems by editing the mask while
  viewing the mask.</p>

  <p>Go back to viewing the top unmodified layer while editing the WIP mask.
  Set your drawing tool the paintbrush. For the brush, choose a small fuzzy
  circle. The 5x5 size is good for most uses.</p>

  <p>With a steady hand, trace around the image. Use black around the outside,
  and white around the inside. Avoid making more than one pass without
  switching colors (and thus sides).</p>

  <p>Flip views a bit, checking to see that the mask is working well. When
  the WIP layer is composited over the green or magenta, you should see a
  tiny bit of the original background as an ugly fringe around the edge.
  If this fringe is missing, then you made the object mask too small.
  The fringe consists of pixels that are neither 100% object nor 0% object.
  For them, the mask should be neither 100% nor 0%. The fringe gets removed
  soon.</p>

  <p>View and edit the mask. Select by color, choosing either black or white.
  Most likely you will see unselected specks that are not quite the expected
  color. Invert the selection, then paint these away using the pencil tool.
  Do this operation for both white and black.</p>

</blockquote>

<h2>Replace the fringe and junk pixels:</h2>
<blockquote>

  <p>Still viewing the mask, select by color. Choose black. Shrink the
  selection by several pixels, being sure to NOT shrink from the edges of
  the mask (the shrink helps you avoid and recover from mistakes).</p>

  <p>Now disable the mask. View and edit the unmasked WIP layer. Using the
  color picker tool, choose a color that is average for the object.
  Drag-and-drop this color into the selection, thus removing most of the
  non-object pixels.</p>

  <p>This solid color will compress well and will help prevent ugly color
  fringes when Tux&nbsp;Paint scales the image down. If the edge of the
  object has multiple colors that are very different, you should split up
  your selection so that you can color the nearby background to be
  similar.</p>

  <p>Now you will paint away the existing edge fringe. Be sure that you are
  editing and viewing the WIP image. Frequent layer visibility changes will
  help you to see what you are doing. You are likely to use all of:</p>

  <ul>
  <li>composited over green (mask enabled)
  <li>composited over magenta (mask enabled)
  <li>original (the top or bottom layer)
  <li>composited over the original (mask enabled)
  <li>raw WIP layer (mask DISABLED)
  </ul>

  <p>To reduce accidents, you may wish to select only those pixels that are
  not grey in the mask. (Select by color from the mask, choose black, add
  mode, choose white, invert. Alternately: Select all, select by color from
  the mask, subtract mode, choose black, choose white.) If you do this,
  you'll probably want to expand the selection a bit and/or hide the
  "crawling ants" line that marks the selection.</p>

  <p>Use the clone tool and the brush tool. Vary the opacity as needed.
  Use small round brushes mostly, perhaps 3x3 or 5x5, fuzzy or not.
  (It is generally nice to pair up fuzzy brushes with 100% opacity and
  non-fuzzy brushes with about 70% opacity.) Unusual drawing modes can be
  helpful with semi-transparent objects.</p>

  <p>The goal is to remove the edge fringe, both inside and outside of
  the object. The inside fringe, visible when the object is composited
  over magenta or green, must be removed for obvious reasons. The
  outside fringe must also be removed because it will become visible
  when the image is scaled down. As an example, consider a 2x2 region of
  pixels at the edge of a sharp-edged object.  The left half is black
  and 0% opaque. The right half is white and 100% opaque.  That is, we
  have a white object on a black background. When Tux&nbsp;Paint scales this
  to 50% (a 1x1 pixel area), the result will be a grey 50% opaque pixel.
  The correct result would be a white 50% opaque pixel. To get this
  result, we would paint away the black pixels. They matter, despite
  being 0% opaque.</p>

  <p>Tux&nbsp;Paint can scale images down by a very large factor, so it is
  important to extend the edge of your object outward by a great deal.
  Right at the edge of your object, you should be very accurate about this.
  As you go outward away from the object, you can get a bit sloppy. It is
  reasonable to paint outward by a dozen pixels or more. The farther you go,
  the more Tux&nbsp;Paint can scale down without creating ugly color fringes.
  For areas that are more than a few pixels away from the object edge, you
  should use the pencil tool (or sloppy select with drag-and-drop color) to
  ensure that the result will compress well.</p>
</blockquote>

<h2>Save the image for Tux Paint</h2>
<blockquote>

  <p>It is very easy to ruin your hard work. Image editors can silently
  destroy pixels in 0% opaque areas. The conditions under which this
  happens may vary from version to version. If you are very trusting,
  you can try saving your image directly as a PNG. Be sure to read it
  back in again to verify that the 0% opaque areas didn't turn black or
  white, which would create fringes when Tux&nbsp;Paint scales the image down.
  If you need to scale your image to save space (and hide your mistakes), you
  are almost certain to destroy all the 0% opaque areas. So here is a better
  way...</p>

  <h3>A Safer Way to Save:</h3>
  <blockquote>

    <p>Drag the mask from the layers dialog to the unused portion of
    the toolbar (right after the last drawing tool). This will create a
    new image consisting of one layer that contains the mask data. Scale
    this as desired, remembering the settings you use. Often you should
    start with an image that is about 700 to 1500 pixels across, and end
    up with one that is 300 to 400.</p>

    <p>Save the mask image as a NetPBM portable greymap ("<code>.pgm</code>")
    file. (If you are using an old release of The&nbsp;GIMP, you might need
    to convert the image to greyscale before you can save it.)  Choose the
    more compact "RAW&nbsp;PGM" format.  (The second character of the file
    should be the ASCII digit "5", hex byte 0x35.)</p>

    <p>You may close the mask image.</p>

    <p>Going back to the multi-layer image, now select the WIP layer. As you
    did with the mask, drag this from the layers dialog to the toolbar. You
    should get a single-layer image of your WIP data. If the mask came along
    too, get rid of it. You should be seeing the object and the painted-away
    surroundings, without any mask thumbnail in the layers dialog. If you
    scaled the mask, then scale this image in exactly the same way. Save
    this image as a NetPBM portable pixmap ("<code>.ppm</code>") file.
    (Note: ppm, not pgm.)  (If you choose the RAW&nbsp;PPM format, the
    second byte of the file should be the ASCII digit "6", hex byte 0x36.)</p>

    <p>Now you need to merge the two files into one. Do that with the
    <a href="http://netpbm.sourceforge.net/">pnmtopng</a> command, like
    this:</p>

    <blockquote><p><code>
      pnmtopng -force -compression 9 -alpha mask.pgm fg.ppm &gt;
      final-stamp.png
    </code></p></blockquote>
  </blockquote>
</blockquote>

</body></html>