#ifndef _LINUX_TTY_H
#define _LINUX_TTY_H
/*
* 'tty.h' defines some structures used by tty_io.c and some defines.
*/
/*
* These constants are also useful for user-level apps (e.g., VC
* resizing).
*/
#define MIN_NR_CONSOLES 1 /* must be at least 1 */
#define MAX_NR_CONSOLES 63 /* serial lines start at 64 */
#define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
/* Note: the ioctl VT_GETSTATE does not work for
consoles 16 and higher (since it returns a short) */
#ifdef __KERNEL__
#include <linux/config.h>
#include <linux/fs.h>
#include <linux/major.h>
#include <linux/termios.h>
#include <linux/tqueue.h>
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
#include <linux/serialP.h>
#include <asm/system.h>
/*
* Note: don't mess with NR_PTYS until you understand the tty minor
* number allocation game...
* (Note: the *_driver.minor_start values 1, 64, 128, 192 are
* hardcoded at present.)
*/
#define NR_PTYS 256 /* ptys/major */
#define NR_LDISCS 16
/*
* Unix98 PTY's can be defined as any multiple of NR_PTYS up to
* UNIX98_PTY_MAJOR_COUNT; this section defines what we need from the
* config options
*/
#ifdef CONFIG_UNIX98_PTYS
# define UNIX98_NR_MAJORS ((CONFIG_UNIX98_PTY_COUNT+NR_PTYS-1)/NR_PTYS)
# if UNIX98_NR_MAJORS <= 0
# undef CONFIG_UNIX98_PTYS
# elif UNIX98_NR_MAJORS > UNIX98_PTY_MAJOR_COUNT
# error Too many Unix98 ptys defined
# undef UNIX98_NR_MAJORS
# define UNIX98_NR_MAJORS UNIX98_PTY_MAJOR_COUNT
# endif
#endif
/*
* These are set up by the setup-routine at boot-time:
*/
struct screen_info {
unsigned char orig_x; /* 0x00 */
unsigned char orig_y; /* 0x01 */
unsigned short dontuse1; /* 0x02 -- EXT_MEM_K sits here */
unsigned short orig_video_page; /* 0x04 */
unsigned char orig_video_mode; /* 0x06 */
unsigned char orig_video_cols; /* 0x07 */
unsigned short unused2; /* 0x08 */
unsigned short orig_video_ega_bx; /* 0x0a */
unsigned short unused3; /* 0x0c */
unsigned char orig_video_lines; /* 0x0e */
unsigned char orig_video_isVGA; /* 0x0f */
unsigned short orig_video_points; /* 0x10 */
/* VESA graphic mode -- linear frame buffer */
unsigned short lfb_width; /* 0x12 */
unsigned short lfb_height; /* 0x14 */
unsigned short lfb_depth; /* 0x16 */
unsigned long lfb_base; /* 0x18 */
unsigned long lfb_size; /* 0x1c */
unsigned short dontuse2, dontuse3; /* 0x20 -- CL_MAGIC and CL_OFFSET here */
unsigned short lfb_linelength; /* 0x24 */
unsigned char red_size; /* 0x26 */
unsigned char red_pos; /* 0x27 */
unsigned char green_size; /* 0x28 */
unsigned char green_pos; /* 0x29 */
unsigned char blue_size; /* 0x2a */
unsigned char blue_pos; /* 0x2b */
unsigned char rsvd_size; /* 0x2c */
unsigned char rsvd_pos; /* 0x2d */
unsigned short vesapm_seg; /* 0x2e */
unsigned short vesapm_off; /* 0x30 */
unsigned short pages; /* 0x32 */
/* 0x34 -- 0x3f reserved for future expansion */
};
extern struct screen_info screen_info;
#define ORIG_X (screen_info.orig_x)
#define ORIG_Y (screen_info.orig_y)
#define ORIG_VIDEO_MODE (screen_info.orig_video_mode)
#define ORIG_VIDEO_COLS (screen_info.orig_video_cols)
#define ORIG_VIDEO_EGA_BX (screen_info.orig_video_ega_bx)
#define ORIG_VIDEO_LINES (screen_info.orig_video_lines)
#define ORIG_VIDEO_ISVGA (screen_info.orig_video_isVGA)
#define ORIG_VIDEO_POINTS (screen_info.orig_video_points)
#define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */
#define VIDEO_TYPE_CGA 0x11 /* CGA Display */
#define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */
#define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */
#define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */
#define VIDEO_TYPE_VLFB 0x23 /* VESA VGA in graphic mode */
#define VIDEO_TYPE_TGAC 0x40 /* DEC TGA */
#define VIDEO_TYPE_SUN 0x50 /* Sun frame buffer. */
#define VIDEO_TYPE_SUNPCI 0x51 /* Sun PCI based frame buffer. */
#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */
#define VIDEO_TYPE_SGI 0x70 /* Various SGI graphics hardware */
#define VIDEO_TYPE_MIPS_G364 0x71 /* MIPS Magnum 4000 G364 video */
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
* a c_cc[] character, but indicates that a particular special character
* isn't in use (eg VINTR has no character etc)
*/
#define __DISABLED_CHAR '\0'
/*
* This is the flip buffer used for the tty driver. The buffer is
* kmalloced, and is used as a high speed interface between tty driver
* and the line discipline.
*/
/* HACK for old drivers, don't include this constant in new code */
#define TTY_FLIPBUF_SIZE 512
struct tty_flip_buffer {
struct tq_struct tqueue;
struct semaphore pty_sem;
char *char_buf_ptr;
unsigned char *flag_buf_ptr;
int count;
int buf_num;
int flipbuf_size;
unsigned char *char_buf;
char *flag_buf;
};
/*
* The pty uses char_buf and flag_buf as a contiguous buffer
*/
#define PTY_BUF_SIZE 4*TTY_FLIPBUF_SIZE
/*
* When a break, frame error, or parity error happens, these codes are
* stuffed into the flags buffer.
*/
#define TTY_NORMAL 0
#define TTY_BREAK 1
#define TTY_FRAME 2
#define TTY_PARITY 3
#define TTY_OVERRUN 4
#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
#define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT])
#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
#define _I_FLAG(tty,f) ((tty)->termios->c_iflag & (f))
#define _O_FLAG(tty,f) ((tty)->termios->c_oflag & (f))
#define _C_FLAG(tty,f) ((tty)->termios->c_cflag & (f))
#define _L_FLAG(tty,f) ((tty)->termios->c_lflag & (f))
#define I_IGNBRK(tty) _I_FLAG((tty),IGNBRK)
#define I_BRKINT(tty) _I_FLAG((tty),BRKINT)
#define I_IGNPAR(tty) _I_FLAG((tty),IGNPAR)
#define I_PARMRK(tty) _I_FLAG((tty),PARMRK)
#define I_INPCK(tty) _I_FLAG((tty),INPCK)
#define I_ISTRIP(tty) _I_FLAG((tty),ISTRIP)
#define I_INLCR(tty) _I_FLAG((tty),INLCR)
#define I_IGNCR(tty) _I_FLAG((tty),IGNCR)
#define I_ICRNL(tty) _I_FLAG((tty),ICRNL)
#define I_IUCLC(tty) _I_FLAG((tty),IUCLC)
#define I_IXON(tty) _I_FLAG((tty),IXON)
#define I_IXANY(tty) _I_FLAG((tty),IXANY)
#define I_IXOFF(tty) _I_FLAG((tty),IXOFF)
#define I_IMAXBEL(tty) _I_FLAG((tty),IMAXBEL)
#define O_OPOST(tty) _O_FLAG((tty),OPOST)
#define O_OLCUC(tty) _O_FLAG((tty),OLCUC)
#define O_ONLCR(tty) _O_FLAG((tty),ONLCR)
#define O_OCRNL(tty) _O_FLAG((tty),OCRNL)
#define O_ONOCR(tty) _O_FLAG((tty),ONOCR)
#define O_ONLRET(tty) _O_FLAG((tty),ONLRET)
#define O_OFILL(tty) _O_FLAG((tty),OFILL)
#define O_OFDEL(tty) _O_FLAG((tty),OFDEL)
#define O_NLDLY(tty) _O_FLAG((tty),NLDLY)
#define O_CRDLY(tty) _O_FLAG((tty),CRDLY)
#define O_TABDLY(tty) _O_FLAG((tty),TABDLY)
#define O_BSDLY(tty) _O_FLAG((tty),BSDLY)
#define O_VTDLY(tty) _O_FLAG((tty),VTDLY)
#define O_FFDLY(tty) _O_FLAG((tty),FFDLY)
#define C_BAUD(tty) _C_FLAG((tty),CBAUD)
#define C_CSIZE(tty) _C_FLAG((tty),CSIZE)
#define C_CSTOPB(tty) _C_FLAG((tty),CSTOPB)
#define C_CREAD(tty) _C_FLAG((tty),CREAD)
#define C_PARENB(tty) _C_FLAG((tty),PARENB)
#define C_PARODD(tty) _C_FLAG((tty),PARODD)
#define C_HUPCL(tty) _C_FLAG((tty),HUPCL)
#define C_CLOCAL(tty) _C_FLAG((tty),CLOCAL)
#define C_CIBAUD(tty) _C_FLAG((tty),CIBAUD)
#define C_CRTSCTS(tty) _C_FLAG((tty),CRTSCTS)
#define L_ISIG(tty) _L_FLAG((tty),ISIG)
#define L_ICANON(tty) _L_FLAG((tty),ICANON)
#define L_XCASE(tty) _L_FLAG((tty),XCASE)
#define L_ECHO(tty) _L_FLAG((tty),ECHO)
#define L_ECHOE(tty) _L_FLAG((tty),ECHOE)
#define L_ECHOK(tty) _L_FLAG((tty),ECHOK)
#define L_ECHONL(tty) _L_FLAG((tty),ECHONL)
#define L_NOFLSH(tty) _L_FLAG((tty),NOFLSH)
#define L_TOSTOP(tty) _L_FLAG((tty),TOSTOP)
#define L_ECHOCTL(tty) _L_FLAG((tty),ECHOCTL)
#define L_ECHOPRT(tty) _L_FLAG((tty),ECHOPRT)
#define L_ECHOKE(tty) _L_FLAG((tty),ECHOKE)
#define L_FLUSHO(tty) _L_FLAG((tty),FLUSHO)
#define L_PENDIN(tty) _L_FLAG((tty),PENDIN)
#define L_IEXTEN(tty) _L_FLAG((tty),IEXTEN)
/*
* Where all of the state associated with a tty is kept while the tty
* is open. Since the termios state should be kept even if the tty
* has been closed --- for things like the baud rate, etc --- it is
* not stored here, but rather a pointer to the real state is stored
* here. Possible the winsize structure should have the same
* treatment, but (1) the default 80x24 is usually right and (2) it's
* most often used by a windowing system, which will set the correct
* size each time the window is created or resized anyway.
* IMPORTANT: since this structure is dynamically allocated, it must
* be no larger than 4096 bytes. Changing TTY_FLIPBUF_SIZE will change
* the size of this structure, and it needs to be done with care.
* - TYT, 9/14/92
*/
struct tty_struct {
int magic;
struct tty_driver driver;
struct tty_ldisc ldisc;
struct termios *termios, *termios_locked;
int pgrp;
int session;
kdev_t device;
unsigned long flags;
int count;
struct winsize winsize;
unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1;
unsigned char low_latency:1, warned:1;
unsigned char ctrl_status;
struct tty_struct *link;
struct fasync_struct *fasync;
struct tty_flip_buffer flip;
int max_flip_cnt;
int alt_speed; /* For magic substitution of 38400 bps */
struct wait_queue *write_wait;
struct wait_queue *read_wait;
struct wait_queue *poll_wait;
struct tq_struct tq_hangup;
void *disc_data;
void *driver_data;
#define N_TTY_BUF_SIZE 4096
/*
* The following is data for the N_TTY line discipline. For
* historical reasons, this is included in the tty structure.
*/
unsigned int column;
unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
unsigned char closing:1;
unsigned short minimum_to_wake;
unsigned overrun_time;
int num_overrun;
unsigned long process_char_map[256/(8*sizeof(unsigned long))];
char *read_buf;
int read_head;
int read_tail;
int read_cnt;
unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
int canon_data;
unsigned long canon_head;
unsigned int canon_column;
struct semaphore atomic_read;
struct semaphore atomic_write;
spinlock_t read_lock;
};
/* tty magic number */
#define TTY_MAGIC 0x5401
/*
* These bits are used in the flags field of the tty structure.
*
* So that interrupts won't be able to mess up the queues,
* copy_to_cooked must be atomic with respect to itself, as must
* tty->write. Thus, you must use the inline functions set_bit() and
* clear_bit() to make things atomic.
*/
#define TTY_THROTTLED 0
#define TTY_IO_ERROR 1
#define TTY_OTHER_CLOSED 2
#define TTY_EXCLUSIVE 3
#define TTY_DEBUG 4
#define TTY_DO_WRITE_WAKEUP 5
#define TTY_PUSH 6
#define TTY_CLOSING 7
#define TTY_DONT_FLIP 8
#define TTY_HW_COOK_OUT 14
#define TTY_HW_COOK_IN 15
#define TTY_PTY_LOCK 16
#define TTY_NO_WRITE_SPLIT 17
#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
extern void tty_write_flush(struct tty_struct *);
extern struct termios tty_std_termios;
extern struct tty_struct * redirect;
extern struct tty_ldisc ldiscs[];
extern int fg_console, last_console, want_console;
extern int kmsg_redirect;
extern unsigned long con_init(unsigned long);
extern int rs_init(void);
extern int lp_init(void);
extern int pty_init(void);
extern int tty_init(void);
extern int mxser_init(void);
extern int moxa_init(void);
extern int ip2_init(void);
extern int pcxe_init(void);
extern int pc_init(void);
extern int vcs_init(void);
extern int rp_init(void);
extern int cy_init(void);
extern int stl_init(void);
extern int stli_init(void);
extern int riscom8_init(void);
extern int specialix_init(void);
extern int espserial_init(void);
extern int macserial_init(void);
extern int mgsl_init(void);
extern int n_hdlc_init(void);
extern int tty_paranoia_check(struct tty_struct *tty, kdev_t device,
const char *routine);
extern char *tty_name(struct tty_struct *tty, char *buf);
extern void tty_wait_until_sent(struct tty_struct * tty, long timeout);
extern int tty_check_change(struct tty_struct * tty);
extern void stop_tty(struct tty_struct * tty);
extern void start_tty(struct tty_struct * tty);
extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
extern int tty_register_driver(struct tty_driver *driver);
extern int tty_unregister_driver(struct tty_driver *driver);
extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
int buflen);
extern void tty_write_message(struct tty_struct *tty, char *msg);
extern int is_orphaned_pgrp(int pgrp);
extern int is_ignored(int sig);
extern int tty_signal(int sig, struct tty_struct *tty);
extern void tty_hangup(struct tty_struct * tty);
extern void tty_vhangup(struct tty_struct * tty);
extern void tty_unhangup(struct file *filp);
extern int tty_hung_up_p(struct file * filp);
extern void do_SAK(struct tty_struct *tty);
extern void disassociate_ctty(int priv);
extern void tty_flip_buffer_push(struct tty_struct *tty);
extern int tty_get_baud_rate(struct tty_struct *tty);
/* n_tty.c */
extern struct tty_ldisc tty_ldisc_N_TTY;
/* tty_ioctl.c */
extern int n_tty_ioctl(struct tty_struct * tty, struct file * file,
unsigned int cmd, unsigned long arg);
/* serial.c */
extern long serial_console_init(long kmem_start, long kmem_end);
/* pcxx.c */
extern int pcxe_open(struct tty_struct *tty, struct file *filp);
/* printk.c */
extern void console_print(const char *);
/* vt.c */
extern int vt_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
#endif /* __KERNEL__ */
#endif
